Monster valve cover with oil cooler mounting

[RichardDDuke]

After managing to source an early Monster oil cooler and a nice stone guard courtesy of Mr. Gazza, I'm found out the the 900ss valve cover with oil cooler mounting is not suitable.

So, I'm after the one fitted to early Monsters.
Parts number is 24010121AA, but it's listed as NLA.

Has anyone got one they no longer need ? If so then let me know via PM or simply reply to this post.

Thanks in advance, Richard

 

[stopintime]

My S2R has the same number, but ending with BB. It has a hole for the temperature sensor. If all else fails, you could plug it....

I bought a cover for an SS and planned to mount a cooler hanging from it. Maybe even as a second cooler to manage operating temperature better (while racing). Does your cooler not fit that way?

 

[stopintime]

https://www.ebay.ca/itm/334487298218

I find many. Did you not search yourself?

 

[RichardDDuke]

https://www.ebay.ca/itm/334487298218

I find many. Did you not search yourself?

I found a few, but at £100 a pop I thought I'd ask around first...
... as it may benefit both me and a fellow UKMOC member.

 

[Kato]

https://www.ebay.co.uk/itm/40482852...4VgzHI4zhnvn4Qu68x6xqKUWU=|tkp:Bk9SR66jiOX7Yw


If you find one in the UK it's going to be £50 and no telling how long before one comes along, so this set in Holland might suit

 

[Mr Gazza]

Motorcycle Spare Parts have got one, genuine and new but £80.59 inc VAT. No indication if that includes postage. https://www.motorcyclespareparts.eu...L9*MTcxNzQzNjExNS4xLjAuMTcxNzQzNjExNS4wLjAuMA..

 

[RichardDDuke]

Motorcycle Spare Parts have got one, genuine and new but £80.59 inc VAT. No indication if that includes postage. https://www.motorcyclespareparts.eu...L9*MTcxNzQzNjExNS4xLjAuMTcxNzQzNjExNS4wLjAuMA..

Gary,
Thanks for the heads up.
I'm hoping to get to bike workshop tomorrow and I want to check if any of the bracketry I made for the oil cooler Tim (DesmoDuke) sent me fits this new cooler. If it does, then I'll use the homemade Al brackets and save myself some cash. If not then I'll have to go the more expensive route and order the part and get it powder coated to match the other 3 valve covers.
Hopefully onwards and upwards....

 

[RichardDDuke]

Have managed to source a suitable valve cover off an injected Monster and will simply blank off the sensor hole. Just need to get the cover blasted and powder coated before it gets fitted. The M900 oil cooler and the oil lines from a 796 Hypermotard ... and one of Mr G's very nice oil cooler guards complete the set up.
http://www.ukmonster.co.uk/monster/showthread.php?t=59143&highlight=oil+cooler+stone+guard
So now sorted.
Thanks to all those who provided help/suggestions with this issue ... much appreciated.