Breather hoses x2

[900Rebuilder]

Hi All,

Looking for the 2 hoses that go from the crankcase via the tank / bottle thing into the airbox if anyone has some for the mk1 Monster?

Thanks,

Ben

 

[Dukedesmo]

I bought a new crankcase to breather box hose a couple of years ago after the end 'fell off' mine, not unreasonably priced actually though the longer, breather box to airbox is a tad expensive.

Part nos 15 & 19 here for online ordering; https://www.bike-parts-ducati.com/d...Monster_900/Monster-900/INTAKE/661/1209/0/661

I've actually got the longer hose that I'm no longer using, unfortunately due to having no airbox I did cut the front end off it to suit the breather setup I was using and have subsequently lost the bit I cut off.

Don't suppose it's any use (if you found another half and were prepared to 'graft' them together) but you're welcome to it if it is.

 

[900Rebuilder]

Thanks - yes the long one is best part of fifty quid which seems excessive for a piece of rubber hose. I've actually got a 90 degree elbow in mine at the moment from a fish tank but the hose I found with the correct diameter was so thick (wall) when I tried it in the original space it would not work so I'll bear your kind offer in mind. Got to put the clutch back together first without any oil leaks!

 

[Dukedesmo]

Yes, before I cut mine (as I prefer not to butcher perfectly good parts) I did look at using a length of silicone hose but it was tricky as there's not much room between the tank & battery box even with the original hose, plus it needed a kink in the end to line up properly with the breather box outlet so, cutting the original worked best at the time.

I've now re-routed the engine breather to a custom box under the seat so have had a complete re-design.