Hi newbie in search of clip-on spacers

10-12-2020, 06:03 PM

Hi everyone, im after the spacers for the coffin master cylinders to do run clipons on my monster 796, has anyone got some or can point me in the right direction. Thanks in advanced

Luddite · 10-12-2020, 06:37 PM

Have a look at this thread from Nasher's post #5 onwards. It might point you in the right direction.

http://ukmonster.co.uk/monster/showthread.php?t=56318

10-12-2020, 06:43 PM

No luck there, i emailed monsterparts and corsair and they are discontinued, thanks anyway matey.

stopintime · 10-12-2020, 11:43 PM

My Monster (with clip ons) doesn't require a spacer on the clutch side. Can't remember if it did on the brake side (before I upgraded to a SF master +)
Converting a 796 to clip ons also requires mods to the wind screen. At least that's how it was described back then.

12-12-2020, 06:07 PM

I dont run a windscreen ive seen many threads on the woodcraft conversion and some chop the light or space it but its mostly basic stuff to do, sourcing this space is the hardest challenge yet as ive been hunting them for weeks now with no luck

slob · 06-01-2021, 02:44 PM

I made a 3D model of these and uploaded to xometry.de as a test

to have a pair CNC machined in Al-6061 was quoted at €89.97 in bare metal and came with the caveat that there would be a minimum 2mm radius on inside edges, so they'd need filing out by hand or incur extra cost.
Plus there'd be postage and duty from Germany. Anodised started at €143.14, which seems pointless without paying the extra to remove the two affected inside radii first.
(They quoted €144 for 3D priniting a pair in laser sintered aluminium)

I have the .STEP file, and you're welcome to it, if you know someone with a CNC mill or can find another online supplier.

Luddite · 06-01-2021, 03:28 PM

What a fantastic effort and gesture by Rob there

What other owners' club would do that for you?

slob · 06-01-2021, 05:44 PM

FWIW, it was quoted at €14.73 to have the pair FDM printed in solid (not honeycomb-fill) ABS which seems quite approachable. even with any additional charges. As I suggested in your other thread they don't need tensile strength as they're in compression once bolted up but I'm a little wary of going that route with a safety critical component...

or €40.92 in Nylon12

Darren69 · 06-01-2021, 06:15 PM

I'd be looking for some alternatives. Brembo goldlines with the remote res aren't that cheap, new or s/hand because they are the same for 748/916 restos, but there may be better eg cheaper options if you can get a similar set from a another Ducati model like a Multi or something?

slob · 06-01-2021, 06:19 PM

Searching for 'Aprilia Master' instead of 'Ducati Master' on eBay often reveals cheaper routes to the same spec Brembo kit

Darkness · 06-01-2021, 06:36 PM

Or Brembo Master/Clutch Kit.

slob · 08-01-2021, 05:24 PM

If anyone is thinking of using xometry.de to manufacture anything, worth noting: having created an account and uploaded a file for 'instant quote', a few day later I got an email offering unspecified first order discount if I requested a manual quote. So even if you like the quoted price, don't order immediately ...

stopintime · 06-02-2021, 10:30 AM

Maybe too late, but.....

https://www.g2ergo.com/shop/g2-perch-spacer/

10-12-2020, 06:03 PM	#1
Wozza88 Guest Posts: n/a	Hi newbie in search of clip-on spacers Hi everyone, im after the spacers for the coffin master cylinders to do run clipons on my monster 796, has anyone got some or can point me in the right direction. Thanks in advanced

06-01-2021, 06:15 PM	#9
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,091	I'd be looking for some alternatives. Brembo goldlines with the remote res aren't that cheap, new or s/hand because they are the same for 748/916 restos, but there may be better eg cheaper options if you can get a similar set from a another Ducati model like a Multi or something? __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

06-01-2021, 06:36 PM	#11
Darkness . Join Date: May 2007 Location: Stockbridge Bike: M900 Posts: 1,984	Or Brembo Master/Clutch Kit. __________________ Original and Best since 1993 Last edited by Darkness; 06-01-2021 at 10:44 PM..

10-12-2020, 06:37 PM	#2
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	Have a look at this thread from Nasher's post #5 onwards. It might point you in the right direction. http://ukmonster.co.uk/monster/showthread.php?t=56318

10-12-2020, 06:43 PM	#3
Wozza88 Guest Posts: n/a	No luck there, i emailed monsterparts and corsair and they are discontinued, thanks anyway matey.

10-12-2020, 11:43 PM	#4
stopintime Registered User Join Date: Dec 2010 Location: Oslo Bike: S2r Posts: 448	My Monster (with clip ons) doesn't require a spacer on the clutch side. Can't remember if it did on the brake side (before I upgraded to a SF master +) Converting a 796 to clip ons also requires mods to the wind screen. At least that's how it was described back then.

12-12-2020, 06:07 PM	#5
Wozza88 Guest Posts: n/a	I dont run a windscreen ive seen many threads on the woodcraft conversion and some chop the light or space it but its mostly basic stuff to do, sourcing this space is the hardest challenge yet as ive been hunting them for weeks now with no luck

06-01-2021, 02:44 PM	#6
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,733	I made a 3D model of these and uploaded to xometry.de as a test to have a pair CNC machined in Al-6061 was quoted at €89.97 in bare metal and came with the caveat that there would be a minimum 2mm radius on inside edges, so they'd need filing out by hand or incur extra cost. Plus there'd be postage and duty from Germany. Anodised started at €143.14, which seems pointless without paying the extra to remove the two affected inside radii first. (They quoted €144 for 3D priniting a pair in laser sintered aluminium) I have the .STEP file, and you're welcome to it, if you know someone with a CNC mill or can find another online supplier.

06-01-2021, 03:28 PM	#7
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	What a fantastic effort and gesture by Rob there What other owners' club would do that for you?

06-01-2021, 05:44 PM	#8
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,733	FWIW, it was quoted at €14.73 to have the pair FDM printed in solid (not honeycomb-fill) ABS which seems quite approachable. even with any additional charges. As I suggested in your other thread they don't need tensile strength as they're in compression once bolted up but I'm a little wary of going that route with a safety critical component... or €40.92 in Nylon12

06-01-2021, 06:19 PM	#10
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,733	Searching for 'Aprilia Master' instead of 'Ducati Master' on eBay often reveals cheaper routes to the same spec Brembo kit

08-01-2021, 05:24 PM	#12
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,733	If anyone is thinking of using xometry.de to manufacture anything, worth noting: having created an account and uploaded a file for 'instant quote', a few day later I got an email offering unspecified first order discount if I requested a manual quote. So even if you like the quoted price, don't order immediately ...

06-02-2021, 10:30 AM	#13
stopintime Registered User Join Date: Dec 2010 Location: Oslo Bike: S2r Posts: 448	Maybe too late, but..... https://www.g2ergo.com/shop/g2-perch-spacer/