Slipper Clutches for S4Rs

02-07-2014, 04:25 AM

Im planning on fitting a slipper clutch when funds become available.

A bit of reading about has picked up a few brands, Sigma, Bucci, Ducabike(?).

Who here uses them and which do you use, prefer, pros and cons. Is it worth the little extra to get a race set?

cheers

Stafford · 02-07-2014, 08:04 AM

For road use why bother?

steeevvvooo · 02-07-2014, 08:31 AM

Quote:

Originally Posted by Stafford

For road use why bother?

why not?

If only for the bling factor isn't that enough reason?

There is some safety benefit I guess in preventing unexpected lock ups but you are right... unlikely to happen on the road.

If you're going to stick one on any monster, the RS seems like a good choice

No personal experience so can't help anymore...

pompone · 02-07-2014, 08:58 AM

Not sure about the race set but they're worth fitting on the bigger cc'd bikes if you already have to replace basket & drums
clutch bits here

Capo · 02-07-2014, 10:12 AM

I rate the slipper clutch as one of the best mods I have made, suiting my riding style.
Most of what is out there are Bucchi clones including the DP item, which uses a six ramp and ball design.
They do wear at the point of the ball/ramp interface, careful assembly using molycoat will reduce this wear and also aid the operation.
The plate stack is different than standard, my differs from the Bucchi instructions and uses two dished plates. It has performed flawlessly.
I strip inspect and rebuild on an annual basis.

Funkatronic · 02-07-2014, 10:25 AM

i have a 48 tooth STM Evoluzione slipper, it works very well
only downside over some other designs that it needs specialist tools to fit and remove to change the plates yourself
like this

Dirty · 02-07-2014, 11:15 AM

Quote:

Originally Posted by steeevvvooo

why not?

Exactly! If you go down that route we may as well sell our bikes and get bus passes!

Funkatronic · 02-07-2014, 11:27 AM

i reckon if you had one on your s2r1000 stafford, you wouldn't go back

Darren69 · 02-07-2014, 11:31 AM

Slippers are good, even for road use, its a much better quality clutch that the standard item. It improves gear changes and just generally feels much nicer to ride. And you've got the saftey factor too!

I have a DP(Bucci) one in my S4 and I think its an STM one in my 748

jonzi · 02-07-2014, 11:37 AM

I have an APTC slipper, whatever that is, on the 796 yet I still bounce the wheel about on downshifts on the road

Fun times!

None of this helps you I just thought I would let you all know.

Stafford · 02-07-2014, 11:44 AM

Quote:

Originally Posted by Funkatronic

i reckon if you had one on your s2r1000 stafford, you wouldn't go back

I have one on my track bike and don't see the need for it on the road.

Darren69 · 02-07-2014, 12:09 PM

I'm not in any way endorsing Sigma, but there is a lot general info on the website:-

http://www.sigmaperformance.com/monstermash.html

Kato · 02-07-2014, 12:39 PM

Had many over the years but currently have these two in use, both STM 48 tooth

Darren69 · 02-07-2014, 01:15 PM

That certainly looks different, novel venting solution. I think I'll be updating to a 48 tooth basket when it comes time to replace mine.

02-07-2014, 01:54 PM

I run a Ducati slipper on my M1100s, and wouldn't be without one now.
Make's a differents on those twisty roads when your up and down the box.
Well recommended as an upgrade.

02-07-2014, 04:25 AM	#1
serialrisk Guest Posts: n/a	Slipper Clutches for S4Rs Im planning on fitting a slipper clutch when funds become available. A bit of reading about has picked up a few brands, Sigma, Bucci, Ducabike(?). Who here uses them and which do you use, prefer, pros and cons. Is it worth the little extra to get a race set? cheers

02-07-2014, 08:04 AM	#2
Stafford P3, nice. Join Date: Jun 2006 Location: Calne Bike: S2r 1000 Posts: 2,145	For road use why bother? __________________ celeres-racing.blogspot.co.uk/ The probability of survival is equal to the angle of arrival.

02-07-2014, 08:58 AM	#4
pompone MaleDucati Join Date: Jan 2009 Location: London Bike: M900 Posts: 817	Not sure about the race set but they're worth fitting on the bigger cc'd bikes if you already have to replace basket & drums clutch bits here __________________ www.desmoperformanceparts.com

02-07-2014, 10:25 AM	#6
Funkatronic another year another bike Join Date: Jul 2008 Location: London Bike: S2r 1000 Posts: 1,597	i have a 48 tooth STM Evoluzione slipper, it works very well only downside over some other designs that it needs specialist tools to fit and remove to change the plates yourself like this Last edited by Funkatronic; 02-07-2014 at 10:28 AM..

02-07-2014, 11:31 AM	#9
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Slippers are good, even for road use, its a much better quality clutch that the standard item. It improves gear changes and just generally feels much nicer to ride. And you've got the saftey factor too! I have a DP(Bucci) one in my S4 and I think its an STM one in my 748 __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

02-07-2014, 10:12 AM	#5
Capo You Are What You Is Join Date: May 2005 Location: A Foward Location Bike: S4r Posts: 1,948	I rate the slipper clutch as one of the best mods I have made, suiting my riding style. Most of what is out there are Bucchi clones including the DP item, which uses a six ramp and ball design. They do wear at the point of the ball/ramp interface, careful assembly using molycoat will reduce this wear and also aid the operation. The plate stack is different than standard, my differs from the Bucchi instructions and uses two dished plates. It has performed flawlessly. I strip inspect and rebuild on an annual basis.

02-07-2014, 11:27 AM	#8
Funkatronic another year another bike Join Date: Jul 2008 Location: London Bike: S2r 1000 Posts: 1,597	i reckon if you had one on your s2r1000 stafford, you wouldn't go back

02-07-2014, 11:37 AM	#10
jonzi Mary Mary Quite Contrary Join Date: Mar 2012 Location: Berkhamsted Bike: M796 Posts: 1,398	I have an APTC slipper, whatever that is, on the 796 yet I still bounce the wheel about on downshifts on the road Fun times! None of this helps you I just thought I would let you all know. __________________ #48

02-07-2014, 12:09 PM	#12
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	I'm not in any way endorsing Sigma, but there is a lot general info on the website:- http://www.sigmaperformance.com/monstermash.html __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

02-07-2014, 12:39 PM	#13
Kato Dismantled Join Date: Feb 2006 Location: East Molesey Bike: Multiple Monsters Posts: 2,247	Had many over the years but currently have these two in use, both STM 48 tooth __________________ "Political correctness is just intellectual colonialism and psychological fascism for the creation of thought crime"

02-07-2014, 01:15 PM	#14
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	That certainly looks different, novel venting solution. I think I'll be updating to a 48 tooth basket when it comes time to replace mine. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

02-07-2014, 01:54 PM	#15
BRH Guest Posts: n/a	I run a Ducati slipper on my M1100s, and wouldn't be without one now. Make's a differents on those twisty roads when your up and down the box. Well recommended as an upgrade.