![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 671 | Total Threads: 50,927 | Total Posts: 519,330 Currently Active Users: 560 (0 active members) Please welcome our newest member, Qsjustin |
![]() |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,891
|
rebuild M750 clutch master ????
OK I have the Brembo kit for the 13mm clutch Master cyclinder,, but the Brembo instruction sheet is useless,,, it does not show coffin style assembly only rear ones or radial types ,, the kit has parts that the Coffin does not need
I know I need the spring , piston, wiper seal , wiper seal spring locator , white plastic ring and round locking ring and rubber boot but the diagram does not show the procedure at all or orientation ,, anyone got a diagram or good video of this ,,,
__________________
MONSTERMAN |
![]() |
![]() |
![]() |
#2 |
Dismantled
Join Date: Feb 2006
Location: East Molesey
Bike: Multiple Monsters
Posts: 2,242
|
Try this Jerry, sorry I don't have the index to go with it, but guess you can work out what is what
PS11 & 13 are almost exactly the same other than piston diameter, units also used by KTM & Moto Guzzi so might have better luck searching in that direction, as I am sure you are aware officially there are no rebuild kits available from Ducati ![]()
__________________
"Political correctness is just intellectual colonialism and psychological fascism for the creation of thought crime" Last edited by Kato; 23-09-2024 at 03:22 PM.. |
![]() |
![]() |
![]() |
#3 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,891
|
Thats excellent Kato ,, it makes sense to me now
__________________
MONSTERMAN |
![]() |
![]() |
![]() |
#4 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,891
|
Hmmmmm.... put it together but not giving any pressure ????/ have I done it wrong ?? , I assembled it same as old one came out ??? Spring , Then wiper seal on piston facing inwards ,, piston in bore then big oring then white cover then locking ring ?????
I have to use this type of Master as it has the choke lugs on ,,,,,
__________________
MONSTERMAN |
![]() |
![]() |
![]() |
#5 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,891
|
I was a bit hasty seems to be bleeding up now ,some pressure felt ,, the push pin was not located correctly ,, i will leave it overnight and bleed it more tommorow ,, Next job is fuel in and set up carbs
__________________
MONSTERMAN |
![]() |
![]() |
![]() |
|
|