1100 evo 2012 not starting

peterd555 · 25-06-2023, 04:09 PM

Hi All new to the forum
Having problems starting my 1100 evo 2012
Have spark, good compression and have just removed tested and cleaned injectors
Have tried new battery, fuel pump, fuel filter and new fuel
Cant smell any fuel at the plugs or exhaust
Have run out of ideas can anyone help 🙏 please

bigredduke · 25-06-2023, 08:58 PM

Have you tried new plugs? Sometimes even if you get a spark with the plug removed, it fails under compression.

rollo22 · 25-06-2023, 10:24 PM

Is the alternative battery new? If not it could be a bit weak and when you put it all back together and press go there is not enough juice in the battery to spark it up.
Is the fuel fresh eg under 2 months old.
Check earth connections and starter connection as well could be gunged up and a huge amp draw.

Luddite · 26-06-2023, 12:13 AM

Welcome aboard and sorry you're having problems with your Evo.

Is this starting issue something that has just happened or is the bike new to you and you've never had it running? If the bike was a runner and the problem has developed recently, did you do anything to the bike prior to this issue, e.g. remove the tank, which could have caused it?

Also, when you turn on the ignition, can you hear the fuel pump priming for a second or two?

Do you see any error codes if you cycle through the menu options with the left bar switchgear?

mickj · 26-06-2023, 09:13 AM

Welcome to the forum peterd555.

If there is no smell of petrol on the I would check the fuel pump again, has a similar problem with my GSX1400. Have you tried damp start?

Mr Gazza · 26-06-2023, 10:30 AM

I bought my M900Sie as a non runner and traced the problem to the connectors on the loom that plug into the injectors.
All the contacts registered a signal on the pins but nothing got thorough when plugged to the injectors. New connectors cured it and it's been trouble free for the last ten years.
I was able to feel the jets of fuel on my finger when I reached down past the open butterflies. (Don't do that with a diesel!!)
Well worth checking that the injectors work on the loom and work back to the pump from there.

There's some interesting info on the fuel system here. http://www.ukmonster.co.uk/monster/s...ad.php?t=39677

Albie · 27-06-2023, 07:48 AM

Firstly was it working before. Did you take tank off for any other reason ie battery replace. Have you for any reason got the fuel connectors connected wrong way around.
Theres very little goes wrong under them unlike early models with rubber lines. Fuel sender and pump connected ok no bent pins I take it.
You say new filter etc and I dont want to assume but all correctly in the flow direction to pump etc. I diagnosed Tony's s4 the other day which turned out to be rotten pipes 15 yr old filter and a line off inside. Sounds like fuel starvation but I think it must be inside the tank not coming out of it.

25-06-2023, 04:09 PM	#1
peterd555 Registered User Join Date: Jun 2023 Location: Wareham Bike: M1100evo Posts: 1	1100 evo 2012 not starting Hi All new to the forum Having problems starting my 1100 evo 2012 Have spark, good compression and have just removed tested and cleaned injectors Have tried new battery, fuel pump, fuel filter and new fuel Cant smell any fuel at the plugs or exhaust Have run out of ideas can anyone help 🙏 please

25-06-2023, 10:24 PM	#3
rollo22 Moderator Join Date: Apr 2008 Location: Moreton-in-Marsh Bike: M1100evo Posts: 1,083	Is the alternative battery new? If not it could be a bit weak and when you put it all back together and press go there is not enough juice in the battery to spark it up. Is the fuel fresh eg under 2 months old. Check earth connections and starter connection as well could be gunged up and a huge amp draw. __________________ IF ALL ELSE FAILS READ THE INSTRUCTIONS

26-06-2023, 09:13 AM	#5
mickj Registered User Join Date: Jun 2018 Location: Clevedon Bike: M1200s Posts: 565	Welcome to the forum peterd555. If there is no smell of petrol on the I would check the fuel pump again, has a similar problem with my GSX1400. Have you tried damp start? __________________ Keep the rubber side down. Mick

26-06-2023, 10:30 AM	#6
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,985	I bought my M900Sie as a non runner and traced the problem to the connectors on the loom that plug into the injectors. All the contacts registered a signal on the pins but nothing got thorough when plugged to the injectors. New connectors cured it and it's been trouble free for the last ten years. I was able to feel the jets of fuel on my finger when I reached down past the open butterflies. (Don't do that with a diesel!!) Well worth checking that the injectors work on the loom and work back to the pump from there. There's some interesting info on the fuel system here. http://www.ukmonster.co.uk/monster/s...ad.php?t=39677 __________________

27-06-2023, 07:48 AM	#7
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Firstly was it working before. Did you take tank off for any other reason ie battery replace. Have you for any reason got the fuel connectors connected wrong way around. Theres very little goes wrong under them unlike early models with rubber lines. Fuel sender and pump connected ok no bent pins I take it. You say new filter etc and I dont want to assume but all correctly in the flow direction to pump etc. I diagnosed Tony's s4 the other day which turned out to be rotten pipes 15 yr old filter and a line off inside. Sounds like fuel starvation but I think it must be inside the tank not coming out of it. __________________ http://albies93m900.blogspot.co.uk/

25-06-2023, 08:58 PM	#2
bigredduke Nothing to see here Join Date: May 2005 Location: brough Bike: M1100evo Posts: 1,550	Have you tried new plugs? Sometimes even if you get a spark with the plug removed, it fails under compression.

26-06-2023, 12:13 AM	#4
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	Welcome aboard and sorry you're having problems with your Evo. Is this starting issue something that has just happened or is the bike new to you and you've never had it running? If the bike was a runner and the problem has developed recently, did you do anything to the bike prior to this issue, e.g. remove the tank, which could have caused it? Also, when you turn on the ignition, can you hear the fuel pump priming for a second or two? Do you see any error codes if you cycle through the menu options with the left bar switchgear?