Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 676 | Total Threads: 50,945 | Total Posts: 519,467 Currently Active Users: 899 (0 active members) Please welcome our newest member, Humph |
|
|
Thread Tools | Display Modes |
12-06-2024, 11:51 AM | #1 |
Registered User
Join Date: Oct 2021
Location: Linlithgow
Bike: S2r
Posts: 30
|
Best forks to swap on my S2R 800?
Looking at getting new forks for my S2R 800.
L From reading, it seems that the forks from a 1000SS are more adjustable and are the easiest to swap over. Is that right? |
12-06-2024, 12:05 PM | #2 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
|
S4 or S4R may be a better choice imho.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
12-06-2024, 12:19 PM | #3 |
Registered User
Join Date: Oct 2021
Location: Linlithgow
Bike: S2r
Posts: 30
|
What makes them a better choice?
|
12-06-2024, 01:15 PM | #4 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
|
SS forks are longer than Monster forks, so you'll have problems from that point of view to start with. I think that the springs are a bit stiffer too?
So as Darren says, S4 or S4R legs will be much more of a plug and play solution. S2R1000, M900Sie and M800Sie legs would be the same, but make sure you get the adjustable version. 620ie would work too but not sure if they came with adjustable forks? Don't go earlier than 1999 models as those will have different caliper and mudguard mounts. If you found some S4RS legs you would be in clover, as I believe they had Ohlins forks and I'm fairly sure those would fit straight into your yokes, others might confirm this. I think they will also have radial brake mounts, so you would need a pair of radial calipers to suit and also bigger discs. Then you'd really have something worth having. It's well worthwhile considering fitting the bigger (320mm) discs at this stage anyway and also upgrading the calipers to Goldlines or radials depending on the mounting type on your legs. You need to just check the disc and caliper offsets as well if you swap, but you should be fine with 10mm offset discs and Goldline calipers. Radials might need a different disc offset.
__________________
Last edited by Mr Gazza; 12-06-2024 at 01:19 PM.. |
12-06-2024, 03:03 PM | #5 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
|
What Gazza said really, more plug n play. I've got a few sets spare if you're interested. One set on ebay and some other less nice ones.
Message me on ebay as its easier to post pics there. https://www.ebay.co.uk/usr/ilmostromaestro
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
12-06-2024, 04:31 PM | #6 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
|
There you go. Dazza has what you need and not a bad price. Ohlins would be more than double that even secondhand.
He's even got a pair of discs that I think would go straight on, you'd just need a pair of calipers. Actually I'm not sure if your existing calipers would work with a 320mm disc without the dropper bracket. If it's possible someone will already have done it?
__________________
|
12-06-2024, 06:18 PM | #7 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
|
Yea, you'll need the P30/34 or P4 calipers like those you had from me Gazza. I don't have any more sets but plenty on ebay Gold P4s were from mk2 Aprillia RSV and Tuono btw maybe others Ducati had silver for some reason.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
13-06-2024, 06:39 AM | #8 |
Registered User
Join Date: Oct 2021
Location: Linlithgow
Bike: S2r
Posts: 30
|
Great stuff guys, Dazza will drop you a line on eBay.
Now I have to think about brakes! |
13-06-2024, 07:59 AM | #9 |
Dismantled
Join Date: Feb 2006
Location: East Molesey
Bike: Multiple Monsters
Posts: 2,247
|
WHY -
Would you replace the forks ? are they duff Mostly across the range they are pretty much the same so your better off spending what you would on a replacement set getting good internals for the set you already have. Unless as has been said you can find a set of Ohlins from an S4rs but then you will also need the calipers Another option would be Ohlins from Aprilia RSV Mille, early ones used axial calipers so should be able to swap existing brakes over, later forks went to radial so again you need new calipers RSV forks will be cheaper than S4rs but are essentially the same Set of good used Ohlins are going to be around £800 -1200 Could get service re-valve / spring in what you have for half that money and prob end up with a better set up as will be tuned to your preference There are a miriade of other choices that will fit depending on how much / little other work you want to do
__________________
"Political correctness is just intellectual colonialism and psychological fascism for the creation of thought crime" Last edited by Kato; 13-06-2024 at 08:21 AM.. |
13-06-2024, 02:34 PM | #10 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
|
Doing this on a budget is the thing. The S4R forks do at least offer some basic adjustment and TiN coating which the S2R does not. Andreani is an option but still not cheap and Ohlins are no doubt very good but tend to leak and need expensive rebuild every other year or so.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
13-06-2024, 04:29 PM | #11 |
Too much time on my hands member
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,208
|
Cheap is relative, by the time you factor in a set of calipers (possibly needing a rebuild) and discs (new as poss so they aren't pre-knackered) it is getting a lot more expensive.
The Andreani Miasano conversion is going to cost almost £600 but nothing else needs changing though a good idea would be to fit new seals and dust seals. Then you find the rear unit if it's till standard is struggling to keep up with the now nice front end
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature |
13-06-2024, 04:31 PM | #12 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
|
Kato has a good point regarding tuning up you existing forks, but not sure if this would impart any adjustability, so unless the builder hits it right first time you're stuck with that setting.
It's still well worth getting any second-hand forks serviced before fitting to ensure full performance. Re the S2R brakes; I've studied some pictures and realised that it is not a dropper bracket as I had supposed, but rather a carrier for the sliding posts for the calliper. It seems to be one of those horrid callipers that push the pads onto the outside of the disc and this pulls the caliper on the sliders to engage the inner pads. So you can't do away with the bracket! This means there are only 4 pistons in the whole system, the same as a single Goldline (4 pot calliper). So the master piston will likely be the same as for a single disc @ 13mm (12.7). If you go to twin 4 pot callipers it will increase the lever travel considerably and you might need to replace it with a 16mm version, correct for twin discs or even a 19mm radial master, some of which feature an adjustable fulcrum to get the lever action just right for you. So it gets a little more complicated and expensive, but you don't need to do the brakes straight away as yours will still work as they did before on 65mm centre brake mounts with the standard (300mm?) discs.
__________________
Last edited by Mr Gazza; 13-06-2024 at 08:00 PM.. |
13-06-2024, 04:49 PM | #13 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
|
Katos solution appears to be like Microsofts solution to everything and throw enough money at the problem and you may solve it eventually. We can't all afford £800 a day consultants with Teslas!
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
13-06-2024, 05:22 PM | #14 |
Too much time on my hands member
Join Date: Jun 2007
Location: Forest Of Dean
Bike: S2r
Posts: 3,208
|
Bit of an update.. If you went for the 4 pot goldlines the S2R master would need changing too as Gaza points out, as I understand it the master piston is smaller on the S2R than that fitted on the 800IE by a few mm but still not quite big enough to cope with x4 extra pistons.
Probably any master used on the monsters to drive goldlines would be OK so from a 600/750 if you're happy with the coffin type or a 900/S4 or any model really if you want the remote hydraulic header. I've never had any problems with the S2R's standard calipers with GG pads, the HH's always felt a bit grabby and not as progressive. The Andrani option looks more cost effective once you add in all the extra parts to convert out.
__________________
"The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature |
13-06-2024, 05:23 PM | #15 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
|
Yes, the S2R800 has sliding calipers which were crap even back in the 1970's. I had some on an old Yamaha XS and had to strip and clean the pins every month or so in winter, not a big job but just a pita really.
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
Thread Tools | |
Display Modes | |
|
|