UK Monster Owners Club Forum » .: Technical :. » Mods & How To's » Monster 900Sie 50000mile refresh.

Reply
 
Thread Tools Display Modes
Old 22-02-2024, 09:49 AM   #91
Dukedesmo
Registered User
 
Dukedesmo's Avatar
 
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,901
Regarding lighter wheels, I too was surprised, indeed shocked at the difference felt.

I replaced the wheels on my 916 with Marchesini forged 10-spokes and whilst not carbon light they are significantly lighter than the original 3-spoke wheels.

Fitting them improved every aspect of riding: acceleration, braking and cornering with no downside (other than the cost). The thing that hit me the most was how much more agile the bike felt, especially tipping into a corner, it was like riding a different bike.

Of course you get used to it after a few hours and it all becomes the new normal but of the many upgrades I have made to that bike (and there are many) - more power, less weight, better brakes & suspension etc., lighter wheels were by far the best, most noticeable of all.

It is definitely something I'd like to do to the Monster one day

My advice to anyone considering any modifications - lighter wheels are the best 'bang for your buck' by far.
__________________
M900, 916, LeMans II.

Dukedesmo is offline   Reply With Quote
Old 22-02-2024, 11:28 AM   #92
350TSS
Too much time on my hands member
 
350TSS's Avatar
 
Join Date: Jan 2013
Location: Shipbourne
Bike: M900
Posts: 1,422
I read somewhere that Michelin tyres because of their softer tyre wall construction are significantly lighter than other brands (from memory about 10%).
Manufacturers do not appear to quote tyre weights in their blurb. If it is true then the combination of lighter wheels and lighter tyres should lead to faster acceleration (the wheel and tyre are effectively another flywheel) improved traction because the lighter wheel/tyre combination is better able to follow the profile of the road surface and better/faster directional change due to reduced gyroscopic forces.
350TSS is offline   Reply With Quote
Old 22-02-2024, 10:11 PM   #93
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
Just checked the Ti disc bolts against standard ones.
The Ti are 4g a piece lighter than the standard ones so 4 x 12 = 48g. I've got my 49g deficit back.
Also had Ti caliper bolts for a while so that put's me slightly ahead of standard, but not dramatically. I'm staying fairly level weight wise but gaining upgraded brakes.

Hoping for the phone to ring tomorrow, so I can pick up the centre stand for the weekend.
__________________
Mr Gazza is offline   Reply With Quote
Old 23-02-2024, 05:20 PM   #94
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,561
Quote:
Originally Posted by Mr Gazza View Post
I'm going to contend the gyroscopic effect that you mention in a playful way, as I don't fully understand the details of the principle.
Does the weight of the gyro have an influence or is it the speed of rotation?
Motorcycle steering is initiated by interference to the gyro's procession and if the effect was reduced by weight then I think you would have noticed more effort required to initiate a turn and overcome the bike's mass? Whereas I think you have said the reverse in the past?

I would also posit that the effect has been increased, (or remains the same?) if the major weight is now at the periphery (the tyre) relatively speaking, The central part, (the wheel.) having a lesser effect? That brings diameter into the equation too come to think of it.

There's a nice think for you if you fancied a think and couldn't think of a think..
Ha !
Back down the rabbit hole we go.
I've never yet found my way out.
Anyway, let's have another go.
And joke on you, mate, cos I'm now going to clutter your thread with goodness knows how much ramble.
But first, I might say (and here I quote Jefferson Airplane in paraphrase) ...
Well I thunk and thunk.
Couldn't think of anything better.
I tried so hard.
But thinking ain.t doing me no good, people.
Thinking ain't doing me no good.
https://www.youtube.com/watch?v=JRNRVe0kgC0
Though maybe I'm wrong ... it probably helps keep the Alzheimer's at bay.

I have some notes in the attic from my days as an engineering student in the mid 1970's ... but I'm going to leave them there and instead try and reason my own way through the warren .. cos that's more fun.
I'll get stuff wrong, probably, but it won't be the first time.

So...
Lets say that gyroscopic forces arise from the angular momentum of a rotating mass.
The two variables here are 1) the mass and 2) the radius of rotation .. and 3) the speed of rotation (nobody expects the spanish inquisition) ... but lets rule the latter out by assuming a constant speed.
The mass is distributed over the whole radius, from wheel spindle to tyre periphery (and across the width of the wheel too, but ...)
Lets resolve that mass distribution to a single centre of mass ... imagine a rotating wire hoop of infinite density and thinness (although I use the word infinite loosely here otherwise it would disappear up its own black arsehole, but I digress).
So we now have a single hoop of infinitely thin mass rotating at a single "effective radius".
And here I can say "yes", it seems obvious that lighter wheels would not only reduce the magnitude of the mass but also its distribution and hence the effective radius, both of which contribute to reduced angular momentum.
Since gyroscopic forces arise from angular momentum then those gyroscopic forces must be reduced if the wheels are lighter.

Here is where words start to play tricks ... well on me at least (if they haven't done so already).
But in for a penny .....

So ...
Less angular momentum (from lighter wheels) should mean less force necessary to overcome said angular momentum (Newton's laws of motion). Hence easier steering.
But at the same time I can see your argument, Gary, that if there are more gyroscopic forces acting (from heavier wheels) then there are grounds for saying that there would be a greater tendency for the bike countersteer. Hence easier countersteering ???

I remain somewhat baffled and perplexed by all this.
And there I'm going to leave it, for now.
Capo would have said that only calculations will provide the answer, but that would mean a good rummage in the attic for my 50 year old notes.
I might just go out for a nice relaxing ride on my old Raleigh bicycle instead.
Trouble is, I think there's something wrong with it.
Every time I steer left the bloody thing turns to the right.
Which isn't great on the canal towpath.

By the way, no substances other than tea were used in the production of this rambling.
utopia is offline   Reply With Quote
Old 23-02-2024, 05:27 PM   #95
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,561
Also,
Dukedesmo sums up the advantages of lightweight wheels perfectly.

With respect to the improved acceleration, I would say that it felt like the carbon wheels had given the bike at least an extra 10bhp if not more ... and remember the 750 only produces 60 odd bhp in the first place so we're talking over 15% increase.

Another advantage of the tune-up that comes from lighter wheels is that the improved performance (unlike engine tuning) puts no extra load whatsoever on any component part .. in fact it reduces overall stress in more than one area.
Its like magical free performance (apart from financially of course).
utopia is offline   Reply With Quote
Old 23-02-2024, 06:34 PM   #96
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
Quote:
Originally Posted by utopia View Post
Though maybe I'm wrong ... it probably helps keep the Alzheimer's at bay?
Oh dear! I don't think so..
I do like the Jefferson Airplane association though, as I'm a big fan and of Grace Slick in particular, but hadn't come across that track before. I instantly though of her when you mentioned the rabbit hole, but actually had Spike Milligan in mind with the think of a think thing.

Glad it gave you a think though and also a bit sorry really! I do realise of course that light wheels are a good thing.
Pondering, after writing the comments I also realised that bicycle wheels are considerably lighter than you could possibly get a motorcycle wheel and yet the gyroscopic forces still work to initiate a turn even at very low speeds.
It is probably not possible to make a rotating mass light enough to negate the gyroscopic force? Certainly not on a motorcycle where a tyre will always be required.

Thanks for the think and careful with that tea (Eugene.)
__________________

Last edited by Mr Gazza; 23-02-2024 at 06:36 PM..
Mr Gazza is offline   Reply With Quote
Old 23-02-2024, 08:31 PM   #97
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
Keep your eyes peeled for some S4/ST4 5 spokes! I read that they are 500g lighter ea than the standard ones, which may not sound much. 1kg static is something then you have less gyro aswell. May not be carbon but in the right direction, cheaper too!
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Old 11-05-2024, 10:26 PM   #98
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
Time marches on and I haven't been updating this thread!
Work has been on going though, in fits and starts.
The front end is pretty much sorted now apart from re-lacquering the wheel and fitting the new discs and tyre.
The callipers now have new Ti pinch bolts saving a whopping 50 grams on just 6 bolts. Also they have Stainless pad pins, new pads, Ti banjo bolts and nipples.
I blew each piston out and thoroughly cleaned them fitting them back with a smear of rubber grease.
I gave the calliper bodies a good scrub with a toothbrush and Mr Muscle foaming drain cleaner.. Works a treat. Great on engines too.
It's a two part liquid and gel. I pour a little into a takeaway tub and it foams almost instantly, then dip the toothbrush in and scrub away. Rinse off with water.



Brake lines are new too and yet to be heat-shrunk and filled with fluid.

After a long debarkle trying to find a longer speedo cable, I finally did the obvious and called in at Tinklers, a local Yamaha dealer of long standing. Luckily a mate of over 40 years was behind the counter and he kindly disappeared into the stores with a tape measure and emerged very quickly brandishing a cable of correct length and fitting type, under £20 too.
I now have a speedo cable of equivalent OEM quality.



One slightly impetuous thing I did was replace the Ti mudguard bolts with alloy ones.
They weigh a mere 1 gram each and will take a torque of 5Nm. The recommended torque for mudguard bolts is 4Nm, so they are in spec by the skin of their teeth.
I will be keeping an eye out for fractured bolts!
Saving there was 28g on 4 tiny bolts over the originals. The now spare Ti bolts were re-used to replace the very rusty ones holding the seat plastic undertray, the crankcase breather catch tank and the petrol tank hinge.
Total unsprung weight saving on the front end is 191 grams. and I'm pretty sure the Arashi discs are a little lighter than Brembo too.
__________________
Mr Gazza is offline   Reply With Quote
Old 12-05-2024, 05:26 AM   #99
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,095
Those calipers have come up nice Mr G
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Old 13-05-2024, 10:33 PM   #100
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
Yes, thanks for the callipers Darren. I'm hoping it won't be too long before I can try them out.

Continuing with the catch up. I had been wanting to do something with the remote reservoirs on the handlebars for some time, as the rather complicated brackets, pipes and clips had been getting scruffy and also on my nerves.
Following what Nasher had done with his I had designed some pots that fit directly to the masters and also pick up on the mounting bolt hole for the remote pots.
But then I happened upon a pair of Multistrada reservoirs going very cheap on eBay, complete with lids gaskets and bolts. For sale by a certain "Buzzer" as it happens.
I've sanded the lettering flat on the lids and polished them up, replaced the rubber grommets in the masters and fitted them.. easy as that.





This is much cleaner than the remotes and I quite like the look.
The ones I have designed will eventually be 3D printed by my nephew, but he is a rather busy lad at the moment, getting his career off the ground after getting a degree.
We've done some experiments with printed PETG and it seems to hold brake fluid indefinitely with no leaks. Polypropylene seems to be a little more problematic to print at the moment pending further experimentation when time permits.

Another little detail that had been annoying me was the rear light lens screws.
I had painted them silver a couple of times before, but this doesn't last and the heads are in poor shape.
I took a sample to my stainless screw man at UKStainless and we matched the thread rate on the self tappers with round-head wood screws. A little rub on the buffing wheel puts a sparkle on them and they fit a treat. I had to buy 100 so they were a rather expensive pair of screws, but I will offer these in twos by post when I work out the price. I think they'll come out at a quid posted if anyone's interested?



They did make the old lens look decidedly scruffy, so I bit the bullet and bought a new (pattern) one. The light body is rough too, but I'll probably blow a bit of Gold on it and magic it back to new..
__________________

Last edited by Mr Gazza; 13-05-2024 at 10:35 PM..
Mr Gazza is offline   Reply With Quote
Old 14-05-2024, 10:18 PM   #101
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
On goes 2.6kg.

Almost forgot that I found some stainless roll pins that are the exact size of the retaining pins for the airbox lid clips, so I swapped the rusty ones out for rustless ones.
Also discovered that one wasn't the proper pin at all, but a piece of brass rod that was too small and dropped out. I suspect this is the work of Harrison when he last serviced the valves. unbeknown to him, the last work he will do for me!

My proudest achievement so far is to finally, after so many years, fit the centre stand.
It's been a bit of a battle and I had to get rid of the floating rear brake and part of the Sie extended lower mudguard.
First job was to grind out the cross brace to give the tyre more room. I re-plated this for strength and added a small extra brace close to the pivots as a precaution. (See post #80)
My cousin has a really good chap at his vehicle repair garage who is ace with the company MIG and he did a great job of the welding.
He did forget to move the assistor arm out by 15mm as I asked, but I forgave him.
I got it hot enough to bend at home with a large propane torch I have. but each little bend revealed the need for another in a different place. Long story short it ended up looking like a sad liquorice twist and had compromised the ground clearance unacceptably, so I cut it off.
I figured that a straight arm ending just in front of the silencer would put the foot pedal exactly where I wanted it and be completely out of the way.
I found a piece of tube and splatted it on with my stick welder, but it made it impossible to get the bike on the stand at all. A study of the geometry made it obvious what I had done wrong and how it needed to be to work.
I found a great place in Cumbria who will put a bend of any angle in a 300mm piece of tube, with various diameters available. https://www.vpengineering.net/
So I made a cardboard template to ascertain the angle and ordered up for less than a tenner.
With the actual tube in hand it soon became obvious that I'd got it wrong, but I'm learning and it's now much easier to see what I need to do.
So after another cardboard pattern I made another order with a 27degree bend and this was much more successful. I tacked this with my stick welder and let the good guy finish it properly.



It now comes up just behind the chamfer of the silencer and I don't think I'll be getting down that far with my riding style at my age!
The action to get it on the stand is so easy now. A revelation.
The trick is to get the end of the arm as close to the ground as possible when the stand is down.



You can see the arm through the stand, about 5mm from the ground.

Whilst playing with the stand it occurred to me that I could possibly contrive a way to lock it down and I came up with two brackets that align when the stand is down. Kindly welded on for me again by my new mate.
It will lock down with any disc lock, but I bought an alarm lock for the purpose.



That'll give the thieving scrotes something to think about while I load and aim!!

I'm really pleased with my work and consider it 2.6kg well worth carrying. The disc lock is nearly another half kilo too, but well worth it if I get to keep my bike.

As it happens I have another ST2 stand which I intend to modify in the same way for a Monster.. So if anyone's interested..
__________________

Last edited by Mr Gazza; 14-05-2024 at 10:22 PM..
Mr Gazza is offline   Reply With Quote
Old 15-05-2024, 09:13 AM   #102
900Rebuilder
Registered User
 
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 329
I'll definitely be up for some screws when you're ready but no rush! I also have the centre stand kit to fit to my 900 when I get all my wheels etc powder coated and return from Normandy next month. I won't go for the lock option though as I'm highly likely to forget and try to ride off.

Finally are you seeking the rear brake?
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW
900Rebuilder is offline   Reply With Quote
Old 15-05-2024, 10:03 AM   #103
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
Well I'd be interested in seeing you try to ride off with the centre stand down..
Possibly the only thing funnier was the guy who toppled over in front of me at a roundabout many years ago.
I went help him up and he said he'd forgotten to put his feet down as he'd only just taken the chair off.

Screws no problem, whenever you send me your address. Shame the postage is so much for those tiny bits!

Yes I've got all the brake bits already thanks, Bracket, pads, hose, Ti bolts, a new disc and of course the original caliper.
I'm hoping that will save a few grams over the floating set up as I'm concentrating on paring the unsprung weight down wherever practical/affordable.
I don't see the point in trying to claw back the 3 ish kilos the centre stand has put on since I always ride with pannier full of stuff anyway.
I'll be interested to hear how your centre stand kit fits. I highly recommend a dry fit first.
__________________
Mr Gazza is offline   Reply With Quote
Old 15-05-2024, 10:08 AM   #104
900Rebuilder
Registered User
 
Join Date: Sep 2022
Location: Beeston
Bike: M900
Posts: 329
Currently I've got a built bike sat on a stand with the rear end complete and the yokes fitted at the front with my focus at moment being getting the wiring joined up.

Need wheels, tyres and some other misc parts coating next and then fitting before I can try the stand kit.

Time and money - never have enough of both! But I'd be interested in the rear brake minus the caliper and hose as I've got all those bits already.
__________________
Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW
900Rebuilder is offline   Reply With Quote
Old 15-05-2024, 10:30 AM   #105
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,981
Ah! Sorry to be mean, but I'm hanging on to all the original Sie stuff including a new un-cut mudguard extension.
I did compile a list of part numbers to make a floating brake kit for Craig and Luke at Moto Rapido, hopefully they still have it on file.

For what it's worth I persevered with the floating brake for 11 years and many thousands of miles, while diligently keeping on top of maintenance, it has proved to be a very wear prone set up regarding rose joints, floating axle bushes, discs and pads.
Apart from that it works well when in good order. You can brake hard with no pitch change or wheel hop.

To be honest I think the centre stand trumps the floating brake in terms of usefulness and besides you can't have both btw, the torque rod clashes with the stand.
__________________
Mr Gazza is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:12 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.