Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 667 | Total Threads: 50,920 | Total Posts: 519,253 Currently Active Users: 355 (0 active members) Please welcome our newest member, Joshyyy94 |
|
|
Thread Tools | Display Modes |
22-02-2023, 05:02 PM | #31 |
Bronze Member
Join Date: Nov 2014
Location: Hondon de los Frailes
Bike: S4r
Posts: 292
|
Got to love a reverse cone mega, my first 'big' bike was a Triumph Tiger 750 that had a pair of Anglo bike short reverse cone megas, you could hear it coming miles away, remember, loud pipes save lives ;-)
|
23-02-2023, 08:51 AM | #32 |
Too much time on my hands member
Join Date: Jan 2013
Location: Shipbourne
Bike: M900
Posts: 1,422
|
who remembers "megatons"?, short reverse cone "silencers", chrome, with an aluminium reverse cone and a "universal" long slotted bracket on the inside
|
23-02-2023, 05:23 PM | #33 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 397
|
Started the engine build… these are simple engines to build, just a couple of points to remember… There is one special bolt in the crankcase that has an oil feed hole in it. Its also much easier to pop the piston into the bore, and then put the pin in, the rings are very fragile (and expensive!) make sure you have some rag in holes though, those pin circlips have a life of their own! in one of the pictures you can see a plate which holds the flywheel… this is necessary as the alternator nut and crank nut are VERY tight and need torqueing to 190 NM.
I would like to thank the local council for the steel to make the engine stand. Leaving a large sign in the hedge at the side of the road for 2 years, I felt I had to re-cycle it
__________________
check out my blog! www.jtccc.wordpress.com |
24-02-2023, 03:28 PM | #34 | |
Registered User
Join Date: Jan 2022
Location: Dunfermline
Bike: M1200s
Posts: 31
|
Quote:
Mine is slightly different to this one (and a lot cheaper!) but it's the same idea.... https://www.stomskiracing.com/products/circlip-injector Last edited by dunf; 24-02-2023 at 03:31 PM.. |
|
24-02-2023, 06:26 PM | #35 | |
Bronze Member
Join Date: Nov 2014
Location: Hondon de los Frailes
Bike: S4r
Posts: 292
|
Quote:
|
|
25-02-2023, 07:49 PM | #36 | |
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Quote:
From: http://www.triplesunlimited.com/inde...&product_id=72 From: https://www.suzukiperformancespares....bore-kit/3817/ |
|
25-02-2023, 09:35 PM | #37 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
|
I’ve only ever come across them on S&S pistons for old Harleys before
|
26-02-2023, 10:01 AM | #38 |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,891
|
Agreed, a revelation. I never fit the circlips under the cylinder, preferring to fit the piston to the rod before bringing the barrel down onto it and then use a ring compressor but, either way that does look to be a great solution.
__________________
M900, 916, LeMans II. |
26-02-2023, 04:40 PM | #39 | ||
Registered User
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
|
Quote:
Quote:
http://www.ukmonster.co.uk/monster/s...postcount=1066 At 1:30 & 4:40 you can see how to fashion a home-made version if you've access to a lathe. You can see Richard's own version based on this design here (and very professional-looking it is too!) http://www.ukmonster.co.uk/monster/s...postcount=1070 |
||
03-03-2023, 05:31 PM | #40 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 397
|
thanks guys, I have never seen those installers before, I may have a go at making one next time!
Waiting for a few engine parts so I switched onto the hydraulics. Not sure which front callipers to use yet, so I built both sets. Everything was in great condition so I didn’t change the seals as they were all good.
__________________
check out my blog! www.jtccc.wordpress.com |
05-03-2023, 09:07 AM | #41 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 397
|
I wanted the belts and pulleys to be on show, but I am not keen on open belts… all it takes is one stone! I have made these before out of the original covers. Start by cutting holes with a hole saw, and then cut the oval out. for this I use a saw in the dremel but a saw is OK. Then I marked the profile on some 3mm polycarbonate and cut that to shape. With that in the cut out, I drilled some 3mm holes half in the cover half in the poly. the windows are held in with some 3mm flanged bolts, washers and nylock nuts. I did ad a dab of high strength nutlock and some small neoprene washers as well.
I then hydrodipped them. I know that fake carbon is not everyone’s thing but I like it, and when covered with a lacquer its VERY durable and UV stable, unlike the real stuff! The actual process is easy, and the film and activator is cheap. link to a video below of how its done. https://www.youtube.com/watch?v=jh6Hh1F0-Yg
__________________
check out my blog! www.jtccc.wordpress.com |
06-03-2023, 10:09 AM | #42 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 397
|
Polishing day… I did the engine cases a few weeks ago. I then set a side a full day to polish the rest of the alloy… its a dirty, hard, and somewhat dangerous job! the swinging arm took ages! I used to do it in the workshop, but it made such a mess I now do it on the drive. I have a 2.5 HP 3000 RPM motor that I use that is an absolute beast and takes no prisoners if you get it wrong.
Its mentally draining to do actually, thinking about the angle you present the item to the wheel each time. I sand everything with 400 Mirka Abranet first (if you have not come across that product its a game changer, you will never use wet and dry again!) I use an 8" closed stitched mop and medium compound, followed by a loose mop with fine compound. I use some very fine compound on the stainless. That evening I had a bath as I was so filthy. I actually used fairy liquid to clean me off as ordinary soap doesn’t touch it. Next day I absolutely ached all over!
__________________
check out my blog! www.jtccc.wordpress.com |
06-03-2023, 06:56 PM | #43 |
Registered User
Join Date: Jun 2021
Location: Stratford Upon Avon
Bike: Multiple Monsters
Posts: 288
|
Shiny though !!
|
07-03-2023, 09:33 AM | #44 |
Dismantled
Join Date: Feb 2006
Location: East Molesey
Bike: Multiple Monsters
Posts: 2,239
|
Not as mentally draning as it is to keep it like that once the bike is in use
Can't fault the effort it took, but everyone I know who have done the same gave up trying to maintain it after a few rides
__________________
"Political correctness is just intellectual colonialism and psychological fascism for the creation of thought crime" |
07-03-2023, 12:43 PM | #45 |
Transmaniacon MOC
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,088
|
Is clear anodize possible? I've seen some powder coating that looks like polished metal. Both options probably not DIY though and may be costly?
__________________
Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage |
Thread Tools | |
Display Modes | |
|
|