UK Monster Owners Club Forum » Gallery » UKMOC Bikes » My new M1000 Sie

Reply
 
Thread Tools Rate Thread Display Modes
Old 24-07-2021, 09:29 PM   #1
velosam
Registered User
 
velosam's Avatar
 
Join Date: Sep 2020
Location: Stirling
Bike: M1000ie
Posts: 120
My new M1000 Sie

If you've seen my thread on Random Chat, you'll know I was looking for a replacement for my 620ie, and I found this one sort of locally... only about 170 miles away. The seller's description was overly accurate, which gave me a lot of confidence, so I put an offer in and said I'd go up today to collect.



When I got there, the bike looked better than I thought. I'm unsure if the SE on the tank means its a special edition, or if that's just a play on the Sie?



It seems to have an aluminium tank, and the carbon bits form the Sie are all present and correct. It's got a Power Commander, and the Remus/Ducati Performance cans (which are quieter than the SP Engineering ones on the 620!), and the top of the airbox has been chopped off. There's a Dyno print out which shows it makes 87.49hp and 68.78ftlbs at the rear wheel.

Luckily, I'd taken the train, and my riding gear, so paid the price then had a great run home via the A93 through Braemar and down over Glenshee.





The 620 is great around town and up to 50mph, but beyond that, I felt as though it needed pushed a bit, especially 2-up. The 1000 is much less stressful to make progress on, and can nip past slower cars easier. It takes more to lean it into corners, but it still handles fantastically.



Plans for tomorrow are to remove the centre stand and to do a tail chop - the tea tray is cracked, so I feel vindicated for do this... plus it looks a zillion times better. I'm also going to remove the bar risers as the current position puts my head right in the buffeting zone from the bikini fairing.

Overall, I'm well chuffed.
velosam is offline   Reply With Quote
Old 24-07-2021, 10:14 PM   #2
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,939
The stuff of dreams..
__________________
Mr Gazza is offline   Reply With Quote
Old 25-07-2021, 03:41 AM   #3
Moco1961
Guest
 
Posts: n/a
Congratulations ,what a find! Looks in great condition, nice pics too btw
  Reply With Quote
Old 25-07-2021, 08:55 AM   #4
mickj
Registered User
 
mickj's Avatar
 
Join Date: Jun 2018
Location: Clevedon
Bike: M1200s
Posts: 563
Looks like you got a good bike there Sam.
__________________
Keep the rubber side down. Mick
mickj is offline   Reply With Quote
Old 25-07-2021, 07:46 PM   #5
Jez900ie
Pleasantly surprised!
 
Jez900ie's Avatar
 
Join Date: Nov 2016
Location: Stoke on Trent
Bike: M900ie
Posts: 780
Nice buy matey. Looks like a great ride home too.
__________________
Monsters don't hide under the bed, they sleep inside the shed
Jez900ie is offline   Reply With Quote
Old 25-07-2021, 08:13 PM   #6
Darkness
.
 
Darkness's Avatar
 
Join Date: May 2007
Location: Stockbridge
Bike: M900
Posts: 1,984
I like that. A lot!
__________________
Original and Best since 1993
Darkness is offline   Reply With Quote
Old 25-07-2021, 09:04 PM   #7
Luddite
Registered User
 
Luddite's Avatar
 
Join Date: Aug 2011
Location: Southampton
Bike: M1100evo
Posts: 2,465
You've got a real cracker there, Sam, especially if it does have one of the rare and fabled aluminium tanks! I like the S2R inspired paintwork too.
Luddite is offline   Reply With Quote
Old 25-07-2021, 09:20 PM   #8
velosam
Registered User
 
velosam's Avatar
 
Join Date: Sep 2020
Location: Stirling
Bike: M1000ie
Posts: 120
Quote:
Originally Posted by Luddite View Post
You've got a real cracker there, Sam, especially if it does have one of the rare and fabled aluminium tanks! I like the S2R inspired paintwork too.
Oh yeah, the tank is definitely alu.
velosam is offline   Reply With Quote
Old 25-07-2021, 09:40 PM   #9
enbee23
Registered User
 
Join Date: Sep 2020
Location: Nairn
Bike: S4r
Posts: 99
Lovely bike, congratulations!
enbee23 is offline   Reply With Quote
Old 26-07-2021, 07:39 AM   #10
alan s4
Registered User
 
alan s4's Avatar
 
Join Date: Sep 2013
Location: Glasgow
Bike: S4 challenge
Posts: 447
Re the tail chop, I wouldn't recommend, esp living in Scotland. Your back ends up covered in filth even if it's only slightly wet. Bike looks nice and standard - leave as is IMO, it will be worth more when it comes to sell.
alan s4 is offline   Reply With Quote
Old 26-07-2021, 07:49 AM   #11
Nasher
Registered User
 
Nasher's Avatar
 
Join Date: Jul 2014
Location: Portsmouth
Bike: M900
Posts: 1,518
She looks lovely.

Glad I'm not making that decision on the tail chop.
I did mine as it looks sooooo much better, but yours is even rarer than mine.

I suggest like me you just keep the bit of frame you cut off as it can always be welded back on.
If it was me, considering the above, I'd do it.

Nasher.
__________________
Heaven doesn't want me, and Hell is afraid I'll take over.
Nasher is offline   Reply With Quote
Old 26-07-2021, 08:12 AM   #12
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,939
I can understand wanting to get rid of a plain plastic tea-ray as they aint the prettiest!
But you can get carbon ones which really do show off the rear end.
Swap the number plate illuminator for a little LED and save a couple of pounds at the same time.
I couldn't be without mine, a handy shelf to plonk things on when your hands are full..
__________________
Mr Gazza is offline   Reply With Quote
Old 26-07-2021, 08:20 AM   #13
Flip
Registered User
 
Flip's Avatar
 
Join Date: Mar 2010
Location: Beachtown
Bike: M900
Posts: 2,188
Ahh that age old question and fuel of much debate…… to chop or not to chop?

I’m normally a ‘poop or get off the pot’ kind of person but as Mr G has touched upon there are other options like a kind of ‘halfway house’ of junking all the unnecessary plastics and adding a little carbon.

Here’s mine on my ‘97 900 (definitely handy for putting that cuppa on):


And for later bikes (if you can find one):
__________________
You're perfect, yes, it's true- But without me you're only you!
Flip is offline   Reply With Quote
Old 26-07-2021, 08:46 AM   #14
velosam
Registered User
 
velosam's Avatar
 
Join Date: Sep 2020
Location: Stirling
Bike: M1000ie
Posts: 120
My last one had it done, and I much prefer it. I'm not really bothered about riding in the rain to be honest, so it's unlikely to be an issue that I worry about getting wet… if that happens, I’m going straight home anyway.

I’d planned to keep all of the bits, and either some lugs and grub-screws can be made up to re-fit it, or it can be re-welded. I’m really not a fan of the tea tray - it was a means to an end to get the bike legal, but doesn’t fit with the concept design intent.
velosam is offline   Reply With Quote
Old 26-07-2021, 09:53 AM   #15
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
Are you sure about an Aluminium tank?!
It looks like a stock steel one from an ‘03/‘04 bike, do you have a magnet handy?
slob is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:41 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.