UK Monster Owners Club Forum » Gallery » UKMOC Bikes » Monster M900 1999 - UKMOC Gen 2

Reply
 
Thread Tools Rate Thread Display Modes
Old 27-12-2017, 10:32 AM   #16
Froggy46
Guest
 
Posts: n/a
At the rear end, the 20 year old shock was long gone its best, with probably as much damping as a pogo stick!
Not being able to afford (or justify) some Swedish gold, I looked around for recommendations, it came though the French Mostro Forum (http://ducati-mostro-forum.fr/index.php) where a bunch of very helpful guys (just like here!) all recommended the Shock Factory products.
This company manufactures shocks for many of the small French racing teams (superbike, super stock, endurance). Their shocks are individually spec’ed to your weight and riding style and are very sensibly priced!
SF has been set 20 years ago by a Brit living in France and I am a French living in the UK for the past 20 years!
I did get the optional yellow spring rather than standard red, as it looked more like the original one. I am really pleased with the shock and the way the bike now feels!

Cleaning up:


New Shock Factory ...Shock in place:


With the back end fully refreshed, the raiser were just too much and the bike was sitting precariously on its side stand so it was time to take them away!



Bike was sitting at least 1.5” too high...


So with the raisers out and the new shock, there was sufficient range to raise the rear to where it was on the old Shock + raiser set up... without side stand issues! (Picture above was taken when the ride height was still to be sorted)

Last edited by Froggy46; 27-12-2017 at 11:19 AM..
  Reply With Quote
Old 28-12-2017, 07:24 PM   #17
Froggy46
Guest
 
Posts: n/a
At the front, the forks also needed some attention, so I took the bike to FTR in Braintree to see what could be done.
With me being a fairly standard frame, the guys at FTR didn’t think I would need a new set of springs, only a change of the seals, bushes and oil! I have to say they were right and I front is now nicely sorted!






Last edited by Froggy46; 28-12-2017 at 07:30 PM..
  Reply With Quote
Old 29-12-2017, 10:23 AM   #18
Mr Gazza
Lord of the Rings
 
Mr Gazza's Avatar
 
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,939
Wow! What a lovely clean workshop. I'd not heard of FTR before, but noted now.
I've only ever had MCT at Stowmarket recommended to me. How do they compare service and price wise?
__________________
Mr Gazza is offline   Reply With Quote
Old 29-12-2017, 01:34 PM   #19
Froggy46
Guest
 
Posts: n/a
I found them a bit cheaper than MCT (based on the quote given for a full overhaul and service) but not by much. Decision was based on FTR being an hour or so away so I could take the complete bike and get a full set up.
Very competent guys, neat workshop located in a farmhouse lost in the countryside! Most of there business is Moto-X related but they are also very able on sports bikes (there was a 1198 there at the time of my visit), and carry all necessary spares even for our old girls!

http://ftrsuspension.co.uk/
  Reply With Quote
Old 29-12-2017, 02:03 PM   #20
utopia
No turn left unstoned
 
utopia's Avatar
 
Join Date: Jun 2010
Location: leicester
Bike: M750
Posts: 4,557
The plastic terry-clips holding the fork legs is a nice touch.
Dunno whether its their own idea or just part of the supplied kit but its the sort of thing that would give me confidence in the level of care that they take in their work.

Cans look nice and clean, and accentuate the minimalist, clean lines of the bike nicely.
With an old-school flavour too.

Those hoop jack-ups look like they may be the Louigimoto ones.
I guess it all depends on how high you set the fork legs, style of bars and suchlike but the majority view is that a slight raise at the rear (or drop at the front) improves the steering qualities.
Perhaps the extra front end weighting due to your clip-ons will make the jack-ups redundant, but you may find that you want to replace them once you've ridden the bike without them.
Before you do ride it though, I would suggest that you consider lowering the front a tad, or at least be prepared to find the steering very heavy at higher speeds since the front end will be higher and the steering angle therefore "shallower".
I learn't this first hand. I was on the wrong side of the road on the outside of a bend at the time, and kinda heading for the scenery.

ps. if you do decide they're not needed, I would buy them off you.
My homemade ones are a little longer and I'd like to experiment.

What engine paint did you use ?
utopia is offline   Reply With Quote
Old 29-12-2017, 03:18 PM   #21
Froggy46
Guest
 
Posts: n/a
Utopia, thanks for the comments.

For the raisers, I think they are Luigi moto’s indeed, they were on the bike when I got it and made perfect sense then. However with the new rear shock (where the ride height is already set a bit higher than before), the new rose joints (with a slightly longer head) and the new settings at the front, the bike was leaning dangerously on its stand with its raisers still in place. I initially wanted to leave them on and started looking for what could be done to the side stand or what other model stand (916,ST, etc) could do a better job. I could not find anything on any of the forums or anything manufactured for that ... lead me to think that may be I had a problem nobody else had, and I looked at the stack up of all my changes....hence the raisers out !!!
I will give it a few months once the good weather returns to make sure I am happy with the settings, I will keep you posted if I no longer need Luigi’s!!!

I have have tried a few setting at the front, ranging from 15mm to 25mm (fork tube top to clamp), currently ok but going to try to increase it a bit more.

Engine paint is a 2K from RS paint, colour was made by matching with a massive paint flake that had departed from the engine cover (it was in a bit of a state)! Final result is a bit darker than original but I seem to be the only one to notice!!!
  Reply With Quote
Old 29-12-2017, 03:20 PM   #22
Froggy46
Guest
 
Posts: n/a
Some more bits and pieces done at the start of 2017, before getting the bike back on the road:

Refresh the ignition system with Mini Dyna coils, new leads , plugs and caps.

New Chain and sprockets, moving from the standard 15/39 to 15/42 for a bit more go.

And finally, a good tidy up of the brakes with new HH pads and Venhill braided lines to replace the tired braided lines! The people at Venhill were helpful as I was unsure of the size of the front lines (because of the clip-ons) so I did send the existing lines and they used those as templates for the news lines... top job!



On a nice sunny day...


  Reply With Quote
Old 29-12-2017, 05:00 PM   #23
MarkF
Guest
 
Posts: n/a
That Sir, is a very sexy looking bike, many thanks for posting, I would love to do a restoration/tinker, but garage space is bloody expensive here, one day
  Reply With Quote
Old 29-12-2017, 06:13 PM   #24
Froggy46
Guest
 
Posts: n/a
Thank you Mark! Garage space still a premium, constant fight to avoid my kids invading it!
  Reply With Quote
Old 31-12-2017, 03:06 PM   #25
Wasta
Registered User
 
Wasta's Avatar
 
Join Date: Mar 2012
Location: Durham
Bike: M900
Posts: 390
The bike looks fantastic, very cool in black.

I fitted a new shock earlier this year and left my spacers on the hoop as well. The bike handles well and turns easily with them fitted, but I have found the seat angle is very high causing you to sit 'on the back of your bum' IYKWIM. It gets quiet uncomfortable after about half an hour so I'm thinking about taking them off or raising the front a little.
__________________
2018 Aprilia Tuono V4 1100RR
1998 M900 monster
Wasta is offline   Reply With Quote
Old 31-12-2017, 03:52 PM   #26
Doggy
Registered User
 
Doggy's Avatar
 
Join Date: Apr 2017
Location: Kent
Bike: M796
Posts: 510
Looks great . Clip ons really suit the monster . Not sure they would suit me though .
Doggy is offline   Reply With Quote
Old 01-01-2018, 08:54 AM   #27
Zimbo
Too much time on my hands member
 
Zimbo's Avatar
 
Join Date: Apr 2003
Location: Stonehouse, Glos
Bike: Multiple Monsters
Posts: 2,085
Lovely looking machine, very tastefully done and those cans suit the build perfectly!
Zimbo is offline   Reply With Quote
Old 01-01-2018, 02:52 PM   #28
Froggy46
Guest
 
Posts: n/a
Thanks! The clip-ons are still okay for me and not as bad as it looks, as long as I do not spend too much time in city traffic!

The only bad point on the bike is that it is one of the”smaller bales” generation so I do think I will need to do a heads swap before going into more engine upgrades! Any of you tried any performance enhancements on a small valves engine?
  Reply With Quote
Old 01-01-2018, 05:41 PM   #29
Darren69
Transmaniacon MOC
 
Darren69's Avatar
 
Join Date: Sep 2013
Location: Sutton In Ashfield
Bike: Multiple Monsters
Posts: 6,088
Nice bike! Sadly yes it most likely is the small valve motor as was fitted to standard non S monsters in '98-99. Start by lightening all the spinney bits, clutch and flywheel and then if you want to go deeper primary and crank. Clutch and flywheel are easiest and will give the motor a fair bit more pep and rolling pick up. That's as far as I have gone with my S4 and tbh that's enough for me for now. You'll notice a big improvement that will carry over just as well when you get some proper 900 heads and bigger headers instead of the titchy 750 ones you have now.
__________________
Roast Beef Monster!

Termignoni and Bucci - Italian for pipe and slippers!

S4 Fogarty, S4R 07T, 748, Series 1 Mirage
Darren69 is offline   Reply With Quote
Old 01-01-2018, 06:11 PM   #30
Darkness
.
 
Darkness's Avatar
 
Join Date: May 2007
Location: Stockbridge
Bike: M900
Posts: 1,984
What casting Mark is on the heads next to the cam bearing caps? They may have been changed already.
From memory, V2 is what you want, and W isn't. There could be other marks too if changed already.

More here:

http://www.bikeboy.org/900equal.html
__________________
Original and Best since 1993

Last edited by Darkness; 01-01-2018 at 06:14 PM.. Reason: Linkey added
Darkness is offline   Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:57 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.