Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 667 | Total Threads: 50,920 | Total Posts: 519,253 Currently Active Users: 342 (0 active members) Please welcome our newest member, Joshyyy94 |
|
|
Thread Tools | Display Modes |
03-02-2020, 04:37 PM | #46 |
More Tools!
Join Date: Jun 2004
Location: Forres
Bike: Multiple Monsters
Posts: 297
|
__________________
Boris from Forres |
03-02-2020, 04:54 PM | #47 |
More Tools!
Join Date: Jun 2004
Location: Forres
Bike: Multiple Monsters
Posts: 297
|
Nice one mate, glad to be of help..
__________________
Boris from Forres Last edited by boris; 03-02-2020 at 04:58 PM.. |
03-02-2020, 04:55 PM | #48 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,941
|
Many thanks for saving that Boris. (You need to copy and paste the "BBCode full linked")
I was a few mm out here and there measuring the now curved and bent original.. Probably better amend the pencil drawing?
__________________
Last edited by Mr Gazza; 03-02-2020 at 04:58 PM.. |
30-05-2020, 10:12 PM | #49 |
aka Phil
Join Date: Nov 2005
Location: derry
Bike: M900
Posts: 376
|
I made and fitted one of these today. Used a mild steel radiator bracket, pre bent right angle for the mounting tabs and about 1.2mm thick so fairly easily cut and bent into the curve.
Couple of slight mods from the drawing needed. Where it passes the clutch slave cylinder, i had to cut a section out about 3 - 4 mm back to step it in as it was obstructing the rubber boot on the inside of the slave. Also, below the bottom mounting hole, there's a fairly substantial web on the engine casing which got in the road so i stopped the guard just at the bottom mounting tab. Otherwise all fitted easy and the drawing was spot on. Many thanks for posting the diagram.
__________________
.. ~ Last edited by manwithredbike; 30-05-2020 at 10:16 PM.. |
17-07-2020, 08:10 PM | #50 |
Registered User
Join Date: Jan 2014
Location: Newbury
Bike: Multiple Monsters
Posts: 366
|
Mr G. Thanks for the plans.. and thanks also to manwithredbike for the great tip on using an old radiator wall bracket. Spot on fit, easy to make and fit to my 97 M900 during a chain and sprocket change - a job that was well overdue.
|
26-05-2022, 07:15 AM | #51 |
Member
Join Date: Jul 2018
Location: Lincoln
Bike: M620ie
Posts: 116
|
If anyone doesn't have the wherewithal to make there own I found a guy on FB who makes them from SS and sends them to the UK (from Romania) for €40 ish.
I took a risk and it arrived in about a week as he makes them to order and a trial fit shows me a bit of adjustment is required. Edit: search for this guy on FB: Dragos - Leonard Panaitiu
__________________
Doris '03 620 Dark Horace 1980 onwards Harris Mag II Last edited by hh93; 26-05-2022 at 05:01 PM.. |
26-05-2022, 07:50 AM | #52 |
.
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
|
You can post a link Howard, just make it clear it's 'at your own risk'.
The first time someone has a bad experience, they'll shout loudly enough I'm sure. |
Thread Tools | |
Display Modes | |
|
|