UK Monster Owners Club Forum » .: Technical :. » Engines, Clutch, Gears » Valve Shims

Reply
 
Thread Tools Display Modes
Old 20-05-2020, 09:02 PM   #31
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
Quote:
Originally Posted by Murray Mint View Post
But where are you guys getting your shims from what with all this bloody COVID-19 and the likes and bike shops being shut?
I think Moto Rapido parts dept is still operating mail order

Quote:
is there a way of uploading a file to the forum?
PM sent
slob is offline   Reply With Quote
Old 21-05-2020, 02:01 PM   #32
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
http://www.ukmonster.co.uk/downloads/DesmoCalc_v2.xls
slob is offline   Reply With Quote
Old 08-08-2021, 12:26 PM   #33
Terryphukwit
Registered User
 
Join Date: Jul 2021
Location: Canterbury
Bike: S4
Posts: 75
1mm closing clearance

I have got my vertical head off at the mo so checking the clearances, all but one are close but one exhaust closer is 40 thou, serious amount of movement, I now need to pull the rockers and cams but I can't see anything wrong so far it must have been badly calculated and not checked or is there another possible reason for this.. Thanks. .
Terryphukwit is offline   Reply With Quote
Old 08-08-2021, 12:41 PM   #34
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
collets not properly seated or replaced upside down?
is the valve stem stable in the guide?
is the valve sitting right in the seat (stem straight and seat cut/lapped properly)?
slob is offline   Reply With Quote
Old 08-08-2021, 01:27 PM   #35
Terryphukwit
Registered User
 
Join Date: Jul 2021
Location: Canterbury
Bike: S4
Posts: 75
The love seat is good, I thinking the collet may be the issue, iv got the open rockers and cams out just on the closers now, trickier with the springs...
Terryphukwit is offline   Reply With Quote
Old 08-08-2021, 02:22 PM   #36
slob
.
 
slob's Avatar
 
Join Date: Jul 2003
Location: East London
Bike: Multiple Monsters
Posts: 9,733
I generally use a small aluminium drift and a toffee hammer and tap the valve stem to ensure everything’s fully seated after refitting the collets. Look for the polished edges to ensure the collets are the same way up as the where before removal. I also always turn the engine 720deg by hand and recheck everything when i’m done.
slob is offline   Reply With Quote
Old 08-08-2021, 08:20 PM   #37
Terryphukwit
Registered User
 
Join Date: Jul 2021
Location: Canterbury
Bike: S4
Posts: 75
Thanks, I'll follow that and make sure there well seated, that's if I ever get it back together, I have some pitted rockers to deal with now, vertical cylinder, intake right hand opener, exhaust left hand both, I am going to post an ad on here as I really can't do new prices at this time, have already spent quite heavy. Any help on cross compatability with models would be appreciated, I believe st4, s4r are the same but there are likely others??


Terryphukwit is offline   Reply With Quote
Old 09-08-2021, 07:26 AM   #38
Dukedesmo
Registered User
 
Dukedesmo's Avatar
 
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,889
Quote:
Originally Posted by Terryphukwit View Post
Any help on cross compatability with models would be appreciated, I believe st4, s4r are the same but there are likely others??
Basically all 'Desmoquattro' use the same rockers; 748, 851, 888, 916, 996, ST4, S4, S4R but not the 'Testastretta' 998cc versions onwards such as S4RS, 998, 999, 749 etc.

As it happens, I have some spare rockers if you're interested.
__________________
M900, 916, LeMans II.

Dukedesmo is offline   Reply With Quote
Old 09-08-2021, 11:47 AM   #39
Terryphukwit
Registered User
 
Join Date: Jul 2021
Location: Canterbury
Bike: S4
Posts: 75
Quote:
Originally Posted by Dukedesmo View Post
Basically all 'Desmoquattro' use the same rockers; 748, 851, 888, 916, 996, ST4, S4, S4R but not the 'Testastretta' 998cc versions onwards such as S4RS, 998, 999, 749 etc.

As it happens, I have some spare rockers if you're interested.
Thanks, and that would be awesome, I need 2 x left hand openers and 1 x left hand closer..would you like to pm m with the price..
Terryphukwit is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT. The time now is 06:50 PM.

vBulletin Skins by vBmode.com. Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.