Rizoma Carbie Clip-ons

Nasher · 05-09-2021, 10:33 PM

This is a pair of the very sought after Rizoma Clip-ons to fit early Carbie Monsters.

They are far from perfect with marks from usage.
The Right hand one was cracked when I brought them, so I had it professionally Micro-TIG welded.

Because of the above they are only £75 for the pair Collected from Clanfield Hants or £80 Posted within the UK.

I have a set of CCW master Cylinder spacers to go with them if you need them, but they will be an additional £45

Nasher · 12-09-2021, 06:20 PM

Bumpty Bump.

I'm open to offers on these.

Nasher · 01-11-2021, 09:00 AM

Can't believe I still have these.

Nasher · 03-01-2022, 03:23 PM

Still got both the clip-ons and M/C adaptors

Nasher · 04-04-2022, 09:17 AM

Bumpety bump

PPuxley · 13-07-2022, 04:27 PM

Aha! .....But I dont think theyre going to fit over the tops of my later stanchions are they. Reason Im looking is that Ive got someone interested in my M900 but he reckons hes too "sit up and beg" so exploring options for throwing the bar position forward/down.

Mr Gazza · 13-07-2022, 05:11 PM

I think if you fit them to the stanchions they will be far too low to reach and also bob up and down an awful lot, I don't think you would be able to hang on?

However I can't see any reason why they won't fit on top of your fork legs above the yoke. The diameter of Monster fork legs did not change and all the adjustment gubbins will simply stick out of the holes in the clamps.

Unless of course you have fitted superbike forks and enlarged the holes in the yokes?

PPuxley · 13-07-2022, 05:17 PM

Quote:

Originally Posted by Mr Gazza

I think if you fit them to the stanchions they will be far too low to reach and also bob up and down an awful lot, I don't think you would be able to hang on?

However I can't see any reason why they won't fit on top of your fork legs above the yoke. The diameter of Monster fork legs did not change and all the adjustment gubbins will simply stick out of the holes in the clamps.

Unless of course you have fitted superbike forks and enlarged the holes in the yokes?

See my photo. The later forks stick through the top yoke by 15mm, so the clip on doesnt have to just fit over the adjuster knob, but the whole 50mm dia of the stanchion.

Mr Gazza · 13-07-2022, 05:25 PM

See Nasher's photo at the top of this thread.
His fork legs must be 15mm out of the yoke also. The clip on's fit to the top of the fork legs.
Stanchions are 43mm by the way.

PPuxley · 13-07-2022, 05:34 PM

Quote:

Originally Posted by Mr Gazza

See Nasher's photo at the top of this thread.
His fork legs must be 15mm out of the yoke also. The clip on's fit to the top of the fork legs.
Stanchions are 43mm by the way.

Sorry 43mm. OK, yes, if I look at the detail photo I can see theyre recessed for a protruding fork. Now just need to know how serious this guy is before I fork out a hundrec quid or so. Thanks all.

PPuxley · 13-07-2022, 05:42 PM

I should have the courage of my convictions......mine are 50mm. So these wont work

PPuxley · 13-07-2022, 05:47 PM

Apologies, though, I forgot my recent photo that started this was on another thread.

Mr Gazza · 13-07-2022, 06:21 PM

Shoom!....

05-09-2021, 10:33 PM	#1
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Rizoma Carbie Clip-ons This is a pair of the very sought after Rizoma Clip-ons to fit early Carbie Monsters. They are far from perfect with marks from usage. The Right hand one was cracked when I brought them, so I had it professionally Micro-TIG welded. Because of the above they are only £75 for the pair Collected from Clanfield Hants or £80 Posted within the UK. I have a set of CCW master Cylinder spacers to go with them if you need them, but they will be an additional £45 __________________ Heaven doesn't want me, and Hell is afraid I'll take over. Last edited by Nasher; 03-01-2022 at 03:23 PM..

12-09-2021, 06:20 PM	#2
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Bumpty Bump. I'm open to offers on these. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

01-11-2021, 09:00 AM	#3
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Can't believe I still have these. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

03-01-2022, 03:23 PM	#4
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Still got both the clip-ons and M/C adaptors __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

04-04-2022, 09:17 AM	#5
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,510	Bumpety bump __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

13-07-2022, 04:27 PM	#6
PPuxley Registered User Join Date: Apr 2021 Location: Reading Bike: M900 Posts: 600	Aha! .....But I dont think theyre going to fit over the tops of my later stanchions are they. Reason Im looking is that Ive got someone interested in my M900 but he reckons hes too "sit up and beg" so exploring options for throwing the bar position forward/down. __________________ Golf-My favourite game. While my wife plays I'm in the workshop.

13-07-2022, 05:11 PM	#7
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,810	I think if you fit them to the stanchions they will be far too low to reach and also bob up and down an awful lot, I don't think you would be able to hang on? However I can't see any reason why they won't fit on top of your fork legs above the yoke. The diameter of Monster fork legs did not change and all the adjustment gubbins will simply stick out of the holes in the clamps. Unless of course you have fitted superbike forks and enlarged the holes in the yokes? __________________

13-07-2022, 05:25 PM	#9
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,810	See Nasher's photo at the top of this thread. His fork legs must be 15mm out of the yoke also. The clip on's fit to the top of the fork legs. Stanchions are 43mm by the way. __________________

13-07-2022, 05:42 PM	#11
PPuxley Registered User Join Date: Apr 2021 Location: Reading Bike: M900 Posts: 600	I should have the courage of my convictions......mine are 50mm. So these wont work __________________ Golf-My favourite game. While my wife plays I'm in the workshop.

13-07-2022, 05:47 PM	#12
PPuxley Registered User Join Date: Apr 2021 Location: Reading Bike: M900 Posts: 600	Apologies, though, I forgot my recent photo that started this was on another thread. __________________ Golf-My favourite game. While my wife plays I'm in the workshop.

13-07-2022, 06:21 PM	#13
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,810	Shoom!.... __________________