Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 605 | Total Threads: 50,802 | Total Posts: 518,378 Currently Active Users: 359 (0 active members) Please welcome our newest member, ian66 |
|
|
Thread Tools | Display Modes |
09-10-2020, 03:16 PM | #1 |
Registered User
Join Date: Jun 2015
Location: Livingston
Bike: M1100evo
Posts: 863
|
Valves and tolerances
See if I can annoy everybody instead of just Mr Gazza with this next one
Valve clearances ON MY R6 TRACK BIKE - mods delete if necessary So obvs very different to a Ducati, pretty straight forward for the most part and I’m definitely overthinking this however. With regards to tolerances my R6 (exhaust side as an example) is 0.21 to 0.30mm. So I read that as 0.21mm is the loosest the valve should be and 0.30 is the tightest the valve should be. My logic being 0.21 clearance would give the lobe maximum opening time and 0.30 would give the lobe minimum opening time. I look forward to your thoughts and my imminent ban |
|
|