Silver S2R 1000

12-08-2015, 03:31 PM

Here's a quick rundown and a picture of my S2R

One owner (i'm the second) S2R 1000 done just over 21k
DIY tail chop
Smoked screen from eBay - chinese copy for £8 or so, pretty good to be honest.
Pillion pegs removed
Danmoto exhaust courtesy of squarehead - sounds mega!
eBay bar end mirrors - again good for the cash.
7x5 number plate.

Really like riding it, loads of grunt for real life riding conditions. I enjoy cruising around town on it as much as opening it up on the twisties as per the picture!

slob · 12-08-2015, 07:04 PM

Great picture

damien666 · 12-08-2015, 11:57 PM

Looks a very familiar road...... Where was the photo taken?
Hello by the way.

13-08-2015, 09:03 AM

Thanks guys.

Photo was taken on A59 somewhere between Menwith Hill and Bolton Abbey roundabout.

Went out last night did about 60 miles out towards Ripon then Pateley Bridge and back towards Otley - great fun!

damien666 · 13-08-2015, 11:05 AM

Nice one. I quite often call in at the sun inn between otley and pateley bridge on a weekend. Always bikes there. Just have to watch gravel in the carpark!

Dirty · 13-08-2015, 11:14 AM

Quote:

Originally Posted by damien666

. Just have to watch gravel in the carpark!

Either you have very special gravel up there or your TV has broke!

13-08-2015, 12:20 PM

Quote:

Originally Posted by damien666

Nice one. I quite often call in at the sun inn between otley and pateley bridge on a weekend. Always bikes there. Just have to watch gravel in the carpark!

Yes I was up there last Wednesday, that's the main bike night. I'm about 20 mins or so from there so it's a nice quick run out for me. Occasionally some nice kit there and often some interesting cars too. Agree about the gravel!

Darren69 · 13-08-2015, 01:41 PM

Regarding the screen, was it one of these?

http://www.ebay.co.uk/itm/Black-Moto...item2a54da704d

I'm just wondering how it is as I need to replace mine as I managed to put a scratch in it and it cost a small fortune?

13-08-2015, 03:25 PM

Yes exactly that one. I struggled finding one as there was only pricey ones from America listed for the S2R but I then realised the S4 is the same!

It's a good thickness and colour it's just that the edges are not as well finished as the original as it has obviously been cut on a CNC router and then fac-vormed. Whereas the original is probably injection moulded.

For the money its a no-brainer.

Sorry I just realised I did not reply to your PM about your exhausts either. I would have liked them but low on funds, especially as would need a re-map for the bike to run 100%.

Darren69 · 13-08-2015, 04:11 PM

Yea, the only black ones I could find at the time were those expensive ones from the US. So I think I might have to get one to try at that price!

18-08-2015, 11:38 AM

I've always bought those cheap chinese screens for previous bikes. Bought one for the GF's R6 (now Speed Triple) and it survived a winter spill by me whilst my 996 was tucked up in the shed

uncle duke · 19-08-2015, 09:44 AM

Hi
great pic nice bike, have you still got the cat fitted ?? & just running different end cans ?? does it run ok not too lean ?? or have you a different ecu fitted ??
thanks
roger

19-08-2015, 10:32 AM

Hi Roger

yes, cat still fitted, just swapped the end pipes for Danmoto GP Carbon ones (can be found on eBay cheap) no issues with running lean and no ECU mods.

Only when you remove the cat and/or start messing with airbox modifications will it run lean im led to believe.

12-08-2015, 03:31 PM	#1
willber Guest Posts: n/a	Silver S2R 1000 Here's a quick rundown and a picture of my S2R One owner (i'm the second) S2R 1000 done just over 21k DIY tail chop Smoked screen from eBay - chinese copy for £8 or so, pretty good to be honest. Pillion pegs removed Danmoto exhaust courtesy of squarehead - sounds mega! eBay bar end mirrors - again good for the cash. 7x5 number plate. Really like riding it, loads of grunt for real life riding conditions. I enjoy cruising around town on it as much as opening it up on the twisties as per the picture!

13-08-2015, 01:41 PM	#8
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Regarding the screen, was it one of these? http://www.ebay.co.uk/itm/Black-Moto...item2a54da704d I'm just wondering how it is as I need to replace mine as I managed to put a scratch in it and it cost a small fortune? __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

13-08-2015, 04:11 PM	#10
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Yea, the only black ones I could find at the time were those expensive ones from the US. So I think I might have to get one to try at that price! __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

12-08-2015, 07:04 PM	#2
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,736	Great picture

12-08-2015, 11:57 PM	#3
damien666 Registered User Join Date: Dec 2010 Location: Leeds, West-Yorks Bike: S4Rs Posts: 497	Looks a very familiar road...... Where was the photo taken? Hello by the way.

13-08-2015, 09:03 AM	#4
willber Guest Posts: n/a	Thanks guys. Photo was taken on A59 somewhere between Menwith Hill and Bolton Abbey roundabout. Went out last night did about 60 miles out towards Ripon then Pateley Bridge and back towards Otley - great fun!

13-08-2015, 11:05 AM	#5
damien666 Registered User Join Date: Dec 2010 Location: Leeds, West-Yorks Bike: S4Rs Posts: 497	Nice one. I quite often call in at the sun inn between otley and pateley bridge on a weekend. Always bikes there. Just have to watch gravel in the carpark!

13-08-2015, 03:25 PM	#9
willber Guest Posts: n/a	Yes exactly that one. I struggled finding one as there was only pricey ones from America listed for the S2R but I then realised the S4 is the same! It's a good thickness and colour it's just that the edges are not as well finished as the original as it has obviously been cut on a CNC router and then fac-vormed. Whereas the original is probably injection moulded. For the money its a no-brainer. Sorry I just realised I did not reply to your PM about your exhausts either. I would have liked them but low on funds, especially as would need a re-map for the bike to run 100%.

18-08-2015, 11:38 AM	#11
Nottsbiker Guest Posts: n/a	I've always bought those cheap chinese screens for previous bikes. Bought one for the GF's R6 (now Speed Triple) and it survived a winter spill by me whilst my 996 was tucked up in the shed

19-08-2015, 09:44 AM	#12
uncle duke Member Join Date: Aug 2012 Location: ipswich Bike: S2r 1000 Posts: 139	Hi great pic nice bike, have you still got the cat fitted ?? & just running different end cans ?? does it run ok not too lean ?? or have you a different ecu fitted ?? thanks roger

19-08-2015, 10:32 AM	#13
willber Guest Posts: n/a	Hi Roger yes, cat still fitted, just swapped the end pipes for Danmoto GP Carbon ones (can be found on eBay cheap) no issues with running lean and no ECU mods. Only when you remove the cat and/or start messing with airbox modifications will it run lean im led to believe.