Monster Fever..!!!

Mr Gazza · 29-05-2013, 08:27 PM

Hello all..

At last a place to talk Monster.

I just found this site, It's like a breath of fresh air.

Lots of folk on here in Norfolk aswell, I notice. Very encouraging.

Sadly I do not yet have a Monster again. My 40th bike was a 1998 M900, three years old when I got it, and immaculate.

Most definatly the best Bike I ever had, and I had some gems too. Moto Morini 31/2, Ducati 750ss, lots of Bonnies and Ajays and Matchlesses.

The current bike (No41) is a Triumph Sprint ST 955i...God it's awful, I got side tracked whilst looking for a Trident T160V..As soon as I sell it I will be hunting a Monster down.!

There seem to be a lot more Monster variants now, since I was in the picture. I notice that they have lost the hoop from swinging arm to rear shock rocker, and gained a frame tube above the footrest hanger. Lots of different engine sizes too, and restyled clutch covers and stuff. I will do my best to catch up.

It's the "early" Monster that I like the look of and the 900 engine is my favorite, although I did ride a "916" Monster when they came out and I liked it a LOT, except the engine was not such eye candy as the 900.

I will be looking for a cheapie or even a Cat C or D salvage bike, as cash is somwhat of an issue, and any way I like a challenge...Most of my bikes have been completly or patialy re-built, I have a few subtle styling ideas and access to a 3D CNC router..!!

I have a vague idea that an ST2 would make a half decent Monster, but not too sure about that big ugly rad up the front and that plumbing....would it count among these ranks.?

Here's hoping to be telling you all about my new Monster very soon (any one want a Triumph Sprint???

)

Cheers

Gazza

29-05-2013, 09:57 PM

Ere what this complaining about a ruddy great rad at the front, I've got an S4R which has one of those.... Keeps the motor cool though

29-05-2013, 10:13 PM

Welcome to the forum Gazza. Hope you will find a Monster you want and get it up to scratch

Blah blah · 29-05-2013, 10:30 PM

Quote:

Originally Posted by PhilH67

Ere what this complaining about a ruddy great rad at the front, I've got an S4R which has one of those....

Perhaps he's complaining about it because of the very fact that it's got a bleedin hooooge rad at the front...

Oh, and hellooooo

Black Bob · 29-05-2013, 10:47 PM

ST2 - wasn't that air-cooled?

Mr Gazza · 29-05-2013, 11:03 PM

Ha ha...

Nothing agianst liquid cooling at all, and I just love the SR4..(You lucky bugger...!

)

I just have a problem with the big ol' rad blocking my view of that loverly engine.
I'm an old fasioned country boy you see,

used to old fasioned air cooled motorbikes.
I like to see the metal and the engineering. The two valve 900 lump is nice to look at, as well as making bellisimo music and thundering me down the road with pleasant ease.

There is no doubt that liquid cooled motors run much better in all conditions and last longer, but it's such a job to make a naked bike look good with a rad on board....You can't exactly hide them up.!

Ah well, we'll see what comes up. If a cheap ST2 comes my way, I will get to grips with the styling and see what I can do with the rad.

Thanks for the welcome chaps......No takers for a Sprint then?

Cheers

Gazza

Mr Gazza · 29-05-2013, 11:07 PM

All the ST2s that I have encountered have been water cooled, Bob.

It is, I understand, derived from the Paso engine, which, if I am correct, was Ducatis first water cooled bike. (might well be wrong there..)

Cheers

Gazza

30-05-2013, 12:26 AM

Welcome. Certainly sounds like you have found the right place and we have gained a CNC machine oh I mean a lovely new member

Yes apparently there are bikes around that have a bloody great ugly rad on the front and are also called monsters. I have even heard a rumour that some of them are not even yellow!

Mr Gazza · 30-05-2013, 05:23 PM

Oh Gawd..!! I didn't mean to start a war about whether Rads were cool or not

What a terrible pun!!

Thanks for the welcome Dirty, and regarding the CNC router. YES. no reason why we can't all have a play on it.

It will require a CAD drawing to make pretty much whatever you want. Preferably a "Solidworks" drawing for 3D stuff. This is doable at my end if enough information is provided. Nothing we can't achieve with a few emails where ever you are in the world.
No reason why an MDF item could not be made first to try on your bike before commiting to alloy (or whatever)

It's all very new at the moment, and has not been tried out with metal yet, to my knowledge.But it should be no problem at all, everything can be precisely controlled, and we know all the correct feed speeds for Alloy ect.
Also not sure at the moment what the charge rates will be ....But we are talking mates rates here.

You can have a butchers at it here..and you will gather that my other hobby is to do with model aeroplanes.

http://greenairdesigns.com/gadejcfor...hp?topic=276.0

Cheers

Gazza

cactus · 30-05-2013, 11:14 PM

Hi and welcome, I too am a fan of the 900 engine. I have a 900ie and it's a stormer.

hope you get yourself back on one soon.

30-05-2013, 11:27 PM

Oh the rad or not to rad debate has been circulating for ages

It can get heated

but we tend to keep a cap on it

Have to say the machine looks impressive, however I'm now more interested in finding out how to attach a couple of jets to my bike

Mr Gazza · 31-05-2013, 06:13 PM

.............And to think I felt genuinely bad about my little pun-ette

Yup....We could sort you out a little turbine for a couple of grand, and give you all of 18lbs of thrust..

....Best stick to a nice four stroke V twin lump I think.

Thanks Cactus....I wonder if you can tell me if the injection 900s still suffer icing like the carb models.?
I thought the oil fed carb warmer was a gimmick when I first saw it, but I actually used it a few times as it really did work in cool humid conditions.

I am thinking maybe an injection model would be simpler than carbs. After my first experience with injectors on the Triumph...You just plug and play..!

Cheers

Gazza

cactus · 31-05-2013, 11:48 PM

No, no problems with starting in the cold and the fuel injection smooths out the engine at low revs, so none of that lumpiness when trundling along in city traffic. I have a performance ECU and air filter fitted along with carbon Remus cans. Totally sweet.

01-06-2013, 02:46 AM

Just do not ask where does the Tax disc go !!! Lol

Blah blah · 01-06-2013, 08:08 AM

Quote:

Originally Posted by Mr Gazza

.............And to think I felt genuinely bad about my little pun-ette

Careful, don't want to get yourself into hot water...

29-05-2013, 08:27 PM	#1
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,981	Monster Fever..!!! Hello all.. At last a place to talk Monster. I just found this site, It's like a breath of fresh air. Lots of folk on here in Norfolk aswell, I notice. Very encouraging. Sadly I do not yet have a Monster again. My 40th bike was a 1998 M900, three years old when I got it, and immaculate. Most definatly the best Bike I ever had, and I had some gems too. Moto Morini 31/2, Ducati 750ss, lots of Bonnies and Ajays and Matchlesses. The current bike (No41) is a Triumph Sprint ST 955i...God it's awful, I got side tracked whilst looking for a Trident T160V..As soon as I sell it I will be hunting a Monster down.! There seem to be a lot more Monster variants now, since I was in the picture. I notice that they have lost the hoop from swinging arm to rear shock rocker, and gained a frame tube above the footrest hanger. Lots of different engine sizes too, and restyled clutch covers and stuff. I will do my best to catch up. It's the "early" Monster that I like the look of and the 900 engine is my favorite, although I did ride a "916" Monster when they came out and I liked it a LOT, except the engine was not such eye candy as the 900. I will be looking for a cheapie or even a Cat C or D salvage bike, as cash is somwhat of an issue, and any way I like a challenge...Most of my bikes have been completly or patialy re-built, I have a few subtle styling ideas and access to a 3D CNC router..!! I have a vague idea that an ST2 would make a half decent Monster, but not too sure about that big ugly rad up the front and that plumbing....would it count among these ranks.? Here's hoping to be telling you all about my new Monster very soon (any one want a Triumph Sprint???) Cheers Gazza

29-05-2013, 10:47 PM	#5
Black Bob Registered User Join Date: Mar 2009 Location: Exeter Bike: M1100evo Posts: 580	ST2 - wasn't that air-cooled? __________________ "I'm not Black, I'm not Bob and I'm not in Exeter.... no, wait, erm..."

29-05-2013, 11:03 PM	#6
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,981	Ha ha... Nothing agianst liquid cooling at all, and I just love the SR4..(You lucky bugger...!) I just have a problem with the big ol' rad blocking my view of that loverly engine. I'm an old fasioned country boy you see, used to old fasioned air cooled motorbikes. I like to see the metal and the engineering. The two valve 900 lump is nice to look at, as well as making bellisimo music and thundering me down the road with pleasant ease. There is no doubt that liquid cooled motors run much better in all conditions and last longer, but it's such a job to make a naked bike look good with a rad on board....You can't exactly hide them up.! Ah well, we'll see what comes up. If a cheap ST2 comes my way, I will get to grips with the styling and see what I can do with the rad. Thanks for the welcome chaps......No takers for a Sprint then? Cheers Gazza

31-05-2013, 06:13 PM	#12
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,981	.............And to think I felt genuinely bad about my little pun-ette Yup....We could sort you out a little turbine for a couple of grand, and give you all of 18lbs of thrust......Best stick to a nice four stroke V twin lump I think. Thanks Cactus....I wonder if you can tell me if the injection 900s still suffer icing like the carb models.? I thought the oil fed carb warmer was a gimmick when I first saw it, but I actually used it a few times as it really did work in cool humid conditions. I am thinking maybe an injection model would be simpler than carbs. After my first experience with injectors on the Triumph...You just plug and play..! Cheers Gazza

29-05-2013, 09:57 PM	#2
PhilH67 Guest Posts: n/a	Ere what this complaining about a ruddy great rad at the front, I've got an S4R which has one of those.... Keeps the motor cool though

29-05-2013, 10:13 PM	#3
chris_s2r Guest Posts: n/a	Welcome to the forum Gazza. Hope you will find a Monster you want and get it up to scratch

29-05-2013, 11:07 PM	#7
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,981	All the ST2s that I have encountered have been water cooled, Bob. It is, I understand, derived from the Paso engine, which, if I am correct, was Ducatis first water cooled bike. (might well be wrong there..) Cheers Gazza

30-05-2013, 12:26 AM	#8
Dirty Guest Posts: n/a	Welcome. Certainly sounds like you have found the right place and we have gained a CNC machine oh I mean a lovely new member Yes apparently there are bikes around that have a bloody great ugly rad on the front and are also called monsters. I have even heard a rumour that some of them are not even yellow!

30-05-2013, 05:23 PM	#9
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,981	Oh Gawd..!! I didn't mean to start a war about whether Rads were cool or not What a terrible pun!! Thanks for the welcome Dirty, and regarding the CNC router. YES. no reason why we can't all have a play on it. It will require a CAD drawing to make pretty much whatever you want. Preferably a "Solidworks" drawing for 3D stuff. This is doable at my end if enough information is provided. Nothing we can't achieve with a few emails where ever you are in the world. No reason why an MDF item could not be made first to try on your bike before commiting to alloy (or whatever) It's all very new at the moment, and has not been tried out with metal yet, to my knowledge.But it should be no problem at all, everything can be precisely controlled, and we know all the correct feed speeds for Alloy ect. Also not sure at the moment what the charge rates will be ....But we are talking mates rates here. You can have a butchers at it here..and you will gather that my other hobby is to do with model aeroplanes. http://greenairdesigns.com/gadejcfor...hp?topic=276.0 Cheers Gazza

30-05-2013, 11:14 PM	#10
cactus Registered User Join Date: Jul 2011 Location: Dundee Bike: M900ie Posts: 299	Hi and welcome, I too am a fan of the 900 engine. I have a 900ie and it's a stormer. hope you get yourself back on one soon.

30-05-2013, 11:27 PM	#11
Dirty Guest Posts: n/a	Oh the rad or not to rad debate has been circulating for ages It can get heated but we tend to keep a cap on it Have to say the machine looks impressive, however I'm now more interested in finding out how to attach a couple of jets to my bike

31-05-2013, 11:48 PM	#13
cactus Registered User Join Date: Jul 2011 Location: Dundee Bike: M900ie Posts: 299	No, no problems with starting in the cold and the fuel injection smooths out the engine at low revs, so none of that lumpiness when trundling along in city traffic. I have a performance ECU and air filter fitted along with carbon Remus cans. Totally sweet.

01-06-2013, 02:46 AM	#14
He11cat Guest Posts: n/a	Just do not ask where does the Tax disc go !!! Lol