Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 606 | Total Threads: 50,802 | Total Posts: 518,378 Currently Active Users: 368 (0 active members) Please welcome our newest member, andy10v |
|
|
Thread Tools | Display Modes |
|
08-01-2024, 06:38 PM | #1 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,826
|
Yes Duke deso 1 oil seal Duacti price is about £5
Im ordering packs of green Viton O rings in UK cheaper than Ducati as you get 10 for price of 1 from Ducati but checking sizes?? I think they are ........... Clutch pushrod control Pin is 11.6mm OD 8mm ID cross section 1.8mm Fuel Tank sender sealing O ring is 28mm OD 21.2 mm ID cross section 3.55mm
__________________
MONSTERMAN |
02-01-2024, 02:47 PM | #2 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,826
|
the seal is 8mm x 12mm x3mm Im going to get a couple
__________________
MONSTERMAN |
05-01-2024, 09:09 AM | #3 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,826
|
The 3 oil seal and bearing shops i went to did not have small seal sizes I need but Ducati shop opens up again on 8th and he should have
2001 slave seal original outer 16x8.8x3mm ,,, push rod bearing O ring 11.5 x 2mm and push rod layshaft seal 12x8 x3mm
__________________
MONSTERMAN |
08-01-2024, 09:56 AM | #4 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,826
|
Travelled 30 miles to Ducati mechanic shop today the guy told me on phone he had all the seals and orings I need but when i got there He had Zilch ,, so frustrating ,,, now going to give up and get them all in Uk when Im back in 3 weeks , so next time im in thailand I will have the stuff to seal the leaks
at least the bike is 99% perfect ,, and I have the Z900 to ride anyway
__________________
MONSTERMAN |
08-01-2024, 10:30 AM | #5 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,826
|
Im ordering packs of green Viton O rings in UK cheaper than Ducati as you get 10 for price of 1 from Ducati
but checking sizes?? Clutch pushrod control Pin is 11.6mm OD 8mm ID cross section 1.8mm Fuel Tank sender sealing O ring is 28mm OD 21.2 mm ID cross section 3.55mm
__________________
MONSTERMAN |
09-01-2024, 10:50 AM | #6 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,826
|
The 8x12x3mm oil seal is unobtanium here been to SKF main depot and Misumo and RS and the main Ducai dealer in Bangkok none have stock of this seal in Thailand although its easily available in UK but I have the O rings now so thinking can I do a temporay repair to the oil seal in situ using Wellseal it only has to last max 300 miles and 2 weeks and then I will have the new one to fit ?????
what do you chaps think ???
__________________
MONSTERMAN |
|
|