Service/Tuning work near Essex

06-02-2008, 11:21 AM

Hello folks.

I have a 2000 M900 on Carbs and need to get the carbs set up properly due to some rough running and flat spots in the rev range, caused by the fitted of shortened, hi-level open pipes. The Ducati Dealers in the immediate area do not seem overly interested in the work or do not have the means to do the tuning work (so i'm told?). I would like this work done as i want the bike to be back in tip top condition and revving smoothly all the way through its range (who wouldn't?).

Does anyone know a good independant workshop not too far away from the Essex area who may be willing to do this work? The bike has 16,000 miles on it, and therefore i am not fussed about it being done by Ducati, but would prefer a specialist.

I have just spoke to Pro-Twins in Surrey who would gladly do the work and seemed very helpful, but i have also read on here some not so complimentary reports on them.

Do people from this site recommend them, or can they suggest somewhere better. I don't want to have to travel hundreds of miles to get there.

Thanks

Mark

CK & AK · 06-02-2008, 11:27 AM

Mike Dawson - do a search for him on here - brilliant independent

If you want to go up country, then I'd also reccommend Neil at Cornerspeed (Notts), and John @ JHP (Ducati Coventry)

C

slob · 06-02-2008, 12:05 PM

Worth giving Mitch at TecMoto a call
http://www.tecmoto.co.uk/page.php
or Ray at Rosso Corse
http://www.rossocorse.co.uk/

06-02-2008, 09:57 PM

Quote:

Originally Posted by w108rna

Hello folks.

I have a 2000 M900 on Carbs and need to get the carbs set up properly due to some rough running and flat spots in the rev range, caused by the fitted of shortened, hi-level open pipes. The Ducati Dealers in the immediate area do not seem overly interested in the work or do not have the means to do the tuning work (so i'm told?). I would like this work done as i want the bike to be back in tip top condition and revving smoothly all the way through its range (who wouldn't?).

Does anyone know a good independant workshop not too far away from the Essex area who may be willing to do this work? The bike has 16,000 miles on it, and therefore i am not fussed about it being done by Ducati, but would prefer a specialist.

I have just spoke to Pro-Twins in Surrey who would gladly do the work and seemed very helpful, but i have also read on here some not so complimentary reports on them.

Do people from this site recommend them, or can they suggest somewhere better. I don't want to have to travel hundreds of miles to get there.

Thanks

Mark

Speak to Phil Seton in Colchester. He has a full rolling road dyno thingummyjig. He's on 01206 866400 or look at their website. www.seton-tuning.co.uk

crust · 06-02-2008, 10:24 PM

If you want your carbs done properly give chris a ring

He's an approved dyno jet tuning center, he runs his own supermoto team and his MV was the first to win a major road race in ages.

Has got consistant good write ups in all the mags.

Top tuner with a proven track record and his own dyno

Chris at X-Bikes 01945-585533

Address:
Bikerbility ( X-Bikes)
The Paddock
WISBECH
CAMBRIDGESHIRE
PE14 7EU

Opening Hours:
Mon-Fri 9am-6pm

Telephone:
01945 585533

Facsimile:
01945 585593

email:
chris@xbikes.cc

crust

07-02-2008, 08:23 AM

Hi folks.

Thanks for all the replies. I have decided to take the bike down to 'TecMoto' near Romford to have the work done, mainly because it is close and they seemed keen to do the work when i spoke to them.

I will let you know how it goes..........

Ta ta,

Mark

22-02-2008, 02:20 PM

[QUOTE=slob;240954]Worth giving Mitch at TecMoto a call
http://www.tecmoto.co.uk/page.php

I took the bike to TecMoto and collected it this morning. I won't go into what was wrong, but the carbs were stripped, cleaned and serviced, a few little niggles resolved, and now the bike is running like a dream with bags more ooomph.

I would recommend TecMoto near Romford.

Mark

Seb_uk · 22-02-2008, 03:02 PM

Is Tec Moto in Harold Wood, behind a row of shops?

22-02-2008, 05:37 PM

Thats the one!

slob · 22-02-2008, 07:28 PM

Glad to hear you got sorted. Mitch is a top bloke who has helped me out a few times when I needed parts for race bikes at very short notice.

23-02-2008, 06:51 PM

Glad you're sorted, we use BDK Race Engineering for any tuning so if you need an alternative any time try them. James is mustard on Ducatis and he and Sam are thoroughly nice chaps.

Seb_uk · 25-02-2008, 12:56 PM

Quote:

Originally Posted by w108rna

Thats the one!

That's right round the corner from where I work. Very helpful bloke - has adjusted my chain once or twice and wouldn't take any money for it!

06-02-2008, 11:21 AM	#1
w108rna Guest Posts: n/a	Service/Tuning work near Essex Hello folks. I have a 2000 M900 on Carbs and need to get the carbs set up properly due to some rough running and flat spots in the rev range, caused by the fitted of shortened, hi-level open pipes. The Ducati Dealers in the immediate area do not seem overly interested in the work or do not have the means to do the tuning work (so i'm told?). I would like this work done as i want the bike to be back in tip top condition and revving smoothly all the way through its range (who wouldn't?). Does anyone know a good independant workshop not too far away from the Essex area who may be willing to do this work? The bike has 16,000 miles on it, and therefore i am not fussed about it being done by Ducati, but would prefer a specialist. I have just spoke to Pro-Twins in Surrey who would gladly do the work and seemed very helpful, but i have also read on here some not so complimentary reports on them. Do people from this site recommend them, or can they suggest somewhere better. I don't want to have to travel hundreds of miles to get there. Thanks Mark

06-02-2008, 11:27 AM	#2
CK & AK flob-a-lob-a-lob Join Date: Aug 2002 Location: NW Surrey Bike: Multiple Monsters Posts: 3,306	Mike Dawson - do a search for him on here - brilliant independent If you want to go up country, then I'd also reccommend Neil at Cornerspeed (Notts), and John @ JHP (Ducati Coventry) C

06-02-2008, 12:05 PM	#3
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,738	Worth giving Mitch at TecMoto a call http://www.tecmoto.co.uk/page.php or Ray at Rosso Corse http://www.rossocorse.co.uk/

06-02-2008, 10:24 PM	#5
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	If you want your carbs done properly give chris a ring He's an approved dyno jet tuning center, he runs his own supermoto team and his MV was the first to win a major road race in ages. Has got consistant good write ups in all the mags. Top tuner with a proven track record and his own dyno Chris at X-Bikes 01945-585533 Address: Bikerbility ( X-Bikes) The Paddock WISBECH CAMBRIDGESHIRE PE14 7EU Opening Hours: Mon-Fri 9am-6pm Telephone: 01945 585533 Facsimile: 01945 585593 email: chris@xbikes.cc crust

07-02-2008, 08:23 AM	#6
w108rna Guest Posts: n/a	Hi folks. Thanks for all the replies. I have decided to take the bike down to 'TecMoto' near Romford to have the work done, mainly because it is close and they seemed keen to do the work when i spoke to them. I will let you know how it goes.......... Ta ta, Mark

22-02-2008, 02:20 PM	#7
w108rna Guest Posts: n/a	[QUOTE=slob;240954]Worth giving Mitch at TecMoto a call http://www.tecmoto.co.uk/page.php I took the bike to TecMoto and collected it this morning. I won't go into what was wrong, but the carbs were stripped, cleaned and serviced, a few little niggles resolved, and now the bike is running like a dream with bags more ooomph. I would recommend TecMoto near Romford. Mark

22-02-2008, 03:02 PM	#8
Seb_uk Bronze Member Join Date: Apr 2007 Location: Cardiff Bike: M695 Posts: 284	Is Tec Moto in Harold Wood, behind a row of shops?

22-02-2008, 05:37 PM	#9
w108rna Guest Posts: n/a	Thats the one!

22-02-2008, 07:28 PM	#10
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,738	Glad to hear you got sorted. Mitch is a top bloke who has helped me out a few times when I needed parts for race bikes at very short notice.

23-02-2008, 06:51 PM	#11
gremlin Guest Posts: n/a	Glad you're sorted, we use BDK Race Engineering for any tuning so if you need an alternative any time try them. James is mustard on Ducatis and he and Sam are thoroughly nice chaps.