Bits to give away

Bitza · 25-10-2020, 10:35 AM

Right all, have been sorting my STUFF ready for coming move and here's what I don't want to move, as before the routine is that you don't pay me but make a charitable you can afford. OK here's what's to be had mainly to suit Monster's up to around 2002 but some other bits too:-
1. GONE
2. GONE
3. GONE
4. Breather catch bottle,
5. L/H handle bar switches, (1994 type now GONE), & later 12 pin male type,
6. GONE
7. GONE
8. GONE
9. one only SS fork top adjuster,
10. GONE
11. GONE
12. GONE

Odds & sods GONE

Now some later bits:-

13. Battery carrier rocker box mounting type, one set of plastic bits but steel brackets to suit rectangular type mount i.e. M620 and another one to suit square mounts of 1000 engine.
13. Air box pillars,
14. M1000 early type header pipes servicable but not great,
15. GONE

OK you have four weeks to get you request in, or most of it will be binned. Bitza

A FEW OTHER BITS HAVE TURNED UP.

16. Original 1994 type number plate/r-indicator plastic holder (not the very rare very early type) mucky yes but OK, one of the four captive nuts as turned slightly in the plastic but all quite useable,
17. The front wheel drive ring for mechanical speedo.
18. OEC magnetic sump plug.
19. Voltage regulator 3 wire alternator type, good working order.

NOW ENDED...............................NOW ENDED................................NOW ENDED.........................................

Darren69 · 25-10-2020, 11:51 AM

Hi, I'll take the clutch spring cups if they're still available? Thanks

Mr Gazza · 25-10-2020, 12:12 PM

You have a really valuable part on your list..
Those trip re-set knobs are no longer made, nor as far as I know stocked anywhere in the UK.
When I lost mine I was devastated as I use it to measure miles between fill ups.
My brother generated a 3D CAD model of one taken from a pattern kindly donated to me by DukeDesmo. I then commissioned a 3D printed one and donated the CAD model to anyone with a need for it.

If no-one claims it then I will gladly look after it until someone has a need.. But please don't throw it out!..

UKMOC thread with most knob gags. http://www.ukmonster.co.uk/monster/s...ht=trip+winder

PMed you about the loom btw.

Darren69 · 25-10-2020, 12:19 PM

Yea, I did wonder about the trip reset knob, definitely unobtainium these days. I remember following Gazzas thread on it. I wouldn't throw out any of the electrical stuff either, loom, ecu, PC as if they are all in good nick, they will all fetch top dollar.

350TSS · 25-10-2020, 01:40 PM

Please can I bag the 1994 LH switch in the vain hope it solves my electrics problem with the Slow Monster rebuild

Chriswilly · 25-10-2020, 02:03 PM

Would love the wiring loom if possible!

Let me know the postage & inconvenience charge and I'll send some cash or paypal>

Thanks, Chris Willy - nearly 80 and still getting my 'leg over) as they say.

Bitza · 25-10-2020, 03:06 PM

Sorry Chris the loom has gone, I will update my original post as items are claimed to keep people informed of what is actually available. Bitza

Darren69 - I can't PM you because you're Full, but I have your contact details so I'll get them into the post, remember the cups are the Shallow type.

Darren69 · 26-10-2020, 06:47 AM

Made space in my inbox now. Yea, it's the shallow slipper clutch ones that I'm after. Thanks

Wasta · 26-10-2020, 06:54 AM

I would take item 2, the brake master cylinder and levers please.

enbee23 · 26-10-2020, 07:33 PM

If you still have them, I'd very much like items 1, 8 and as much of "collection of special nuts, bolts, spindles & spacers off early type Monster" as possible please

ChrisC2925 · 26-10-2020, 08:11 PM

What year(s) would the LH switches be compatible for Mike?

Bitza · 26-10-2020, 09:44 PM

Sorry I haven't a clue about the year of the switches, just that it uses 11 of the 12 male pins in the connector. The switches would be for bikes with the stepper motor for the injectors cold start, so bearing in mind that and the connector type I'm guessing around 2007ish???? Bitza

enbee23, I've sent you a PM because I need your contact details.

ChrisC2925 · 27-10-2020, 06:16 PM

Quote:

Originally Posted by Bitza

Sorry I haven't a clue about the year of the switches, just that it uses 11 of the 12 male pins in the connector. The switches would be for bikes with the stepper motor for the injectors cold start, so bearing in mind that and the connector type I'm guessing around 2007ish???? Bitza

enbee23, I've sent you a PM because I need your contact details.

Thanks Mike, no good for mine then!

Wasta · 30-10-2020, 08:03 AM

Package arrived yesterday. Thank you very much Mike.

Steve Willmott · 30-10-2020, 05:50 PM

Hi Bitza

Could I have the rear master cylinder please. I’ll PM my address so you can let me know how much postage you need.

Many thanks
Steve

25-10-2020, 10:35 AM	#1
Bitza Bronze Member Join Date: Jul 2006 Location: Poole Bike: M900ie Posts: 470	Bits to give away Right all, have been sorting my STUFF ready for coming move and here's what I don't want to move, as before the routine is that you don't pay me but make a charitable you can afford. OK here's what's to be had mainly to suit Monster's up to around 2002 but some other bits too:- 1. GONE 2. GONE 3. GONE 4. Breather catch bottle, 5. L/H handle bar switches, (1994 type now GONE), & later 12 pin male type, 6. GONE 7. GONE 8. GONE 9. one only SS fork top adjuster, 10. GONE 11. GONE 12. GONE Odds & sods GONE Now some later bits:- 13. Battery carrier rocker box mounting type, one set of plastic bits but steel brackets to suit rectangular type mount i.e. M620 and another one to suit square mounts of 1000 engine. 13. Air box pillars, 14. M1000 early type header pipes servicable but not great, 15. GONE OK you have four weeks to get you request in, or most of it will be binned. Bitza A FEW OTHER BITS HAVE TURNED UP. 16. Original 1994 type number plate/r-indicator plastic holder (not the very rare very early type) mucky yes but OK, one of the four captive nuts as turned slightly in the plastic but all quite useable, 17. The front wheel drive ring for mechanical speedo. 18. OEC magnetic sump plug. 19. Voltage regulator 3 wire alternator type, good working order. NOW ENDED...............................NOW ENDED................................NOW ENDED......................................... __________________ Bitza Last edited by Bitza; 10-11-2020 at 03:41 PM..

25-10-2020, 11:51 AM	#2
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Hi, I'll take the clutch spring cups if they're still available? Thanks __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

25-10-2020, 12:12 PM	#3
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,801	You have a really valuable part on your list.. Those trip re-set knobs are no longer made, nor as far as I know stocked anywhere in the UK. When I lost mine I was devastated as I use it to measure miles between fill ups. My brother generated a 3D CAD model of one taken from a pattern kindly donated to me by DukeDesmo. I then commissioned a 3D printed one and donated the CAD model to anyone with a need for it. If no-one claims it then I will gladly look after it until someone has a need.. But please don't throw it out!.. UKMOC thread with most knob gags. http://www.ukmonster.co.uk/monster/s...ht=trip+winder PMed you about the loom btw. __________________ Last edited by Mr Gazza; 25-10-2020 at 02:37 PM..

25-10-2020, 12:19 PM	#4
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Yea, I did wonder about the trip reset knob, definitely unobtainium these days. I remember following Gazzas thread on it. I wouldn't throw out any of the electrical stuff either, loom, ecu, PC as if they are all in good nick, they will all fetch top dollar. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

25-10-2020, 03:06 PM	#7
Bitza Bronze Member Join Date: Jul 2006 Location: Poole Bike: M900ie Posts: 470	Sorry Chris the loom has gone, I will update my original post as items are claimed to keep people informed of what is actually available. Bitza Darren69 - I can't PM you because you're Full, but I have your contact details so I'll get them into the post, remember the cups are the Shallow type. __________________ Bitza Last edited by Bitza; 25-10-2020 at 03:16 PM..

25-10-2020, 01:40 PM	#5
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,419	Please can I bag the 1994 LH switch in the vain hope it solves my electrics problem with the Slow Monster rebuild

25-10-2020, 02:03 PM	#6
Chriswilly Registered User Join Date: Sep 2012 Location: gloucester Bike: M900ie Posts: 133	Would love the wiring loom if possible! Let me know the postage & inconvenience charge and I'll send some cash or paypal> Thanks, Chris Willy - nearly 80 and still getting my 'leg over) as they say.

26-10-2020, 06:47 AM	#8
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	Made space in my inbox now. Yea, it's the shallow slipper clutch ones that I'm after. Thanks __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

26-10-2020, 06:54 AM	#9
Wasta Registered User Join Date: Mar 2012 Location: Durham Bike: M900 Posts: 386	I would take item 2, the brake master cylinder and levers please. __________________ 2018 Aprilia Tuono V4 1100RR 1998 M900 monster

26-10-2020, 07:33 PM	#10
enbee23 Registered User Join Date: Sep 2020 Location: Nairn Bike: S4r Posts: 99	If you still have them, I'd very much like items 1, 8 and as much of "collection of special nuts, bolts, spindles & spacers off early type Monster" as possible please

26-10-2020, 08:11 PM	#11
ChrisC2925 Registered User Join Date: Jan 2013 Location: Ormskirk Bike: M600 Posts: 244	What year(s) would the LH switches be compatible for Mike?

26-10-2020, 09:44 PM	#12
Bitza Bronze Member Join Date: Jul 2006 Location: Poole Bike: M900ie Posts: 470	Sorry I haven't a clue about the year of the switches, just that it uses 11 of the 12 male pins in the connector. The switches would be for bikes with the stepper motor for the injectors cold start, so bearing in mind that and the connector type I'm guessing around 2007ish???? Bitza enbee23, I've sent you a PM because I need your contact details. __________________ Bitza Last edited by Bitza; 27-10-2020 at 09:54 AM..

30-10-2020, 08:03 AM	#14
Wasta Registered User Join Date: Mar 2012 Location: Durham Bike: M900 Posts: 386	Package arrived yesterday. Thank you very much Mike. __________________ 2018 Aprilia Tuono V4 1100RR 1998 M900 monster

30-10-2020, 05:50 PM	#15
Steve Willmott Junior Member Join Date: Sep 2002 Location: Stevenage Bike: M900 Posts: 61	Hi Bitza Could I have the rear master cylinder please. I’ll PM my address so you can let me know how much postage you need. Many thanks Steve