Another build thread - Ducati 1000

buzzer · 13-06-2020, 03:03 PM

June 2020. I normally build bikes over the winter months... but with Corvid -19 we are not going on any holidays or getting out much so my wife suggested I start my winter project early! I think she prefers me in the garage!

I bought this bike a few years ago... and over the winter 2018/19 I built it into this you see below... over the summer of 2019 I put quite a few miles on it... and actually loved the bike! it feels light and nimble, handles and brakes really well! I normally sell my bikes on, but this time I decided to keep it. A couple of things bugged me though... The tank I used was a compromise, it looks wrong to me, and although the carb conversion worked well... I felt the Monster 38mm Mikuni CV carbs held it back performance wise.

So its in for another rebuild/refresh... cosmetic only as I did the engine last time, and that is running well. I will be fitting some 41mm FCR carbs, a new tank (999) and making a new seat. And maybe change the exhaust...

this build will take some time... but I guess that depends on how corvid 19 affects daily life!

Here are a few pictures from the first rebuild...

buzzer · 13-06-2020, 03:04 PM

a few more...

buzzer · 27-06-2020, 11:42 AM

Been working on making the manifolds from scratch… it’s been quite difficult to get the shape and angles right, while maintaining approximately the same length.. there now though and I am pleased with the results. took a while to smooth the bore with the die grinder where I had penetrated with the TIG welds....

Albie · 27-06-2020, 02:29 PM

Your skills are awesome.

buzzer · 28-06-2020, 03:38 PM

Quote:

Originally Posted by Albie

Your skills are awesome.

Thanks!

here is the subframe i have been making the last few days… I have deliberately kept it short as this will be a short single seat, which is the next job to do… I have used Rose Joints for no other reason than I just like the look of them!

jerry · 28-06-2020, 10:18 PM

excellent looks great

buzzer · 03-07-2020, 12:41 PM

Next the messy job of making a seat, well I actually made two as I couldn’t decide on shape! Its the one thing many people ask how I do it, so I have written a tutorial on it rather than post all of it here.

here is the link to my blog page

https://jtccc.wordpress.com/projects...t-manufacture/

So just a few pictures…

slob · 03-07-2020, 02:13 PM

Interesting, thanks for sharing.

buzzer · 15-07-2020, 06:05 PM

Today I made up some cables for the FCR’s. as they are split I have used a cable junction box, and made up the cables from scratch, including the brass nipples which I have soldered on.

here is a link to a video to see the action...

https://youtu.be/f0Xjr0e7Ukw

walkingpictures · 15-07-2020, 06:39 PM

Loving them carbs for sure....quick off topic question,sorry if it's already been asked....is that the original swingarm or did you do the conversion?

Great stuff so far

Kimbo

buzzer · 15-07-2020, 06:47 PM

Quote:

Originally Posted by walkingpictures

Loving them carbs for sure....quick off topic question,sorry if it's already been asked....is that the original swingarm or did you do the conversion?

Great stuff so far

Kimbo

yes, its the original Multistrada SA

walkingpictures · 15-07-2020, 07:14 PM

D'OH ....ahhhh,got it now,thanks Tony,good luck with the rest of the build

Kimbo

Darren69 · 15-07-2020, 08:22 PM

Liking this thread. The old Multistrada is a good bike hidden under v.ugly plastic, ripe for modification and Monsterizing! The S version even has Ohlins so get 'em cheap while you can. Very ugly but very capable bikes! Even with the one piece tank/seat can be made to look ok

buzzer · 26-07-2020, 06:10 PM

Lockdown is good for progress! I have finished the frame modifications to clear the carbs, and finished the fabrication on the rear subframe so it's off to the powder coaters tomorrow.

I have also stripped the rear shocker so I can change the colour on the spring... not sure what to yet, but definitely not yellow! had to make a clamp as these are strong springs and I have the utmost respect when working with them under this much tension, hence the beefy plate and studs!

And here is the engine...

350TSS · 26-07-2020, 08:35 PM

lovely looking thing

13-06-2020, 03:03 PM	#1
buzzer Registered User Join Date: Jun 2018 Location: Wolverhampton Bike: M900 Posts: 404	Another build thread - Ducati 1000 June 2020. I normally build bikes over the winter months... but with Corvid -19 we are not going on any holidays or getting out much so my wife suggested I start my winter project early! I think she prefers me in the garage! I bought this bike a few years ago... and over the winter 2018/19 I built it into this you see below... over the summer of 2019 I put quite a few miles on it... and actually loved the bike! it feels light and nimble, handles and brakes really well! I normally sell my bikes on, but this time I decided to keep it. A couple of things bugged me though... The tank I used was a compromise, it looks wrong to me, and although the carb conversion worked well... I felt the Monster 38mm Mikuni CV carbs held it back performance wise. So its in for another rebuild/refresh... cosmetic only as I did the engine last time, and that is running well. I will be fitting some 41mm FCR carbs, a new tank (999) and making a new seat. And maybe change the exhaust... this build will take some time... but I guess that depends on how corvid 19 affects daily life! Here are a few pictures from the first rebuild...

27-06-2020, 02:29 PM	#4
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Your skills are awesome. __________________ http://albies93m900.blogspot.co.uk/

28-06-2020, 10:18 PM	#6
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,908	excellent looks great __________________ MONSTERMAN

15-07-2020, 06:05 PM	#9
buzzer Registered User Join Date: Jun 2018 Location: Wolverhampton Bike: M900 Posts: 404	Today I made up some cables for the FCR’s. as they are split I have used a cable junction box, and made up the cables from scratch, including the brass nipples which I have soldered on. here is a link to a video to see the action... https://youtu.be/f0Xjr0e7Ukw Last edited by buzzer; 15-07-2020 at 06:11 PM..

15-07-2020, 08:22 PM	#13
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Liking this thread. The old Multistrada is a good bike hidden under v.ugly plastic, ripe for modification and Monsterizing! The S version even has Ohlins so get 'em cheap while you can. Very ugly but very capable bikes! Even with the one piece tank/seat can be made to look ok __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

13-06-2020, 03:04 PM	#2
buzzer Registered User Join Date: Jun 2018 Location: Wolverhampton Bike: M900 Posts: 404	a few more...

27-06-2020, 11:42 AM	#3
buzzer Registered User Join Date: Jun 2018 Location: Wolverhampton Bike: M900 Posts: 404	Been working on making the manifolds from scratch… it’s been quite difficult to get the shape and angles right, while maintaining approximately the same length.. there now though and I am pleased with the results. took a while to smooth the bore with the die grinder where I had penetrated with the TIG welds....

03-07-2020, 12:41 PM	#7
buzzer Registered User Join Date: Jun 2018 Location: Wolverhampton Bike: M900 Posts: 404	Next the messy job of making a seat, well I actually made two as I couldn’t decide on shape! Its the one thing many people ask how I do it, so I have written a tutorial on it rather than post all of it here. here is the link to my blog page https://jtccc.wordpress.com/projects...t-manufacture/ So just a few pictures…

03-07-2020, 02:13 PM	#8
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,736	Interesting, thanks for sharing.

15-07-2020, 06:39 PM	#10
walkingpictures preneolithic frebie Join Date: Sep 2002 Location: Cambridge Bike: S4Rs Posts: 329	Loving them carbs for sure....quick off topic question,sorry if it's already been asked....is that the original swingarm or did you do the conversion? Great stuff so far Kimbo

15-07-2020, 07:14 PM	#12
walkingpictures preneolithic frebie Join Date: Sep 2002 Location: Cambridge Bike: S4Rs Posts: 329	D'OH ....ahhhh,got it now,thanks Tony,good luck with the rest of the build Kimbo

26-07-2020, 06:10 PM	#14
buzzer Registered User Join Date: Jun 2018 Location: Wolverhampton Bike: M900 Posts: 404	Lockdown is good for progress! I have finished the frame modifications to clear the carbs, and finished the fabrication on the rear subframe so it's off to the powder coaters tomorrow. I have also stripped the rear shocker so I can change the colour on the spring... not sure what to yet, but definitely not yellow! had to make a clamp as these are strong springs and I have the utmost respect when working with them under this much tension, hence the beefy plate and studs! And here is the engine...

26-07-2020, 08:35 PM	#15
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,422	lovely looking thing