S4R Owner spot the difference

16-02-2015, 10:19 PM

Ok so i collected this on Saturday, i have done a little online research but would be interested to know how much of this is non stock.

Rearsets are an obvious one and i removed the rear pillion pegs, i also think the exhaust is routed diffrent from a standard S4R. Mirrors are terrible so i am guessing not original either.

Anything else?

free photo upload

post image online

image hosting without account

slob · 16-02-2015, 10:29 PM

correct on all counts: silencers side by side , rather than stacked. de-cat link pipes, cycle cat rearsets. (probably) rizoma mirrors.

samco radiator hoses. painted teatray. clear rear lens. aftermarket clutch/brake levers. carbon clutch cover/number-plate bracket/stick-on tank pad & (i think) radiator side plates/chainguard

looks like someone (very sensibly) has added radiator and oil cooler guards

looks like a nice clean bike

... & hello and welcome :-)

Darren69 · 17-02-2015, 09:11 AM

Those brake/clutch levers are Ducati Performance by DPM. The carbon radiator side plates are S4 not S4R I think. The S4R ones are nicer. Nice bike though!

Capo · 17-02-2015, 09:38 AM

The exhaust is a full 50mm DP item and came as part of a kit that included SPS cams and ECU. I have this system and is the first time I have seen another

17-02-2015, 11:53 AM

Thanks for the feedback

@Capo what are the sps cams? and could you tell if you have them without stripping the engine? Sounds loud and personally i prefer the under seat confg over the stock so not fussed either way.

and i presume tea tray is the rear lights bit??

alan s4 · 17-02-2015, 02:37 PM

and i presume tea tray is the rear lights bit??

Yes - now chop it off like the rest of the cool crowd

Darren69 · 17-02-2015, 03:44 PM

Quote:

Originally Posted by alan s4

and i presume tea tray is the rear lights bit??

Yes - now chop it off like the rest of the cool crowd

No, get a carbon one, otherwise with those twin pipes either side it will look like a wheelbarrow

Yes 50mm its a full DP system. Part number 96445304B

Corse High Kit, in carbon, Ø 50mm; the set includes
four camshafts with more performing profiles, engine
control unit and high-performance air filter.

Nice!

I have only seen this kit on 2 other bikes.

Capo · 17-02-2015, 05:59 PM

It cost £1433 (in 2004) not including fitting the cams and thats an engine out and heads off job.

If you can get the number(s) off the ECU, I can tell you if it is the DP item.

The fitted kit increases the horse power from 113 to 121, limiter is at 10.5k (500 above the std ecu)

I actually have this system surplus to requirements less the cams as I had it replicated in titanium and use a Nemesis ECU.

SPS cams are hard to find these days.

17-02-2015, 10:24 PM

Thanks for the feedback, chuffed with the exhaust as it's always nice to get something you had no idea was a bonus

. Loving the open clutch look on those pics as well.

May as well continue the trend of the previous owner and start with just a couple of small mods........ahem!

16-02-2015, 10:19 PM	#1
Nosillad Guest Posts: n/a	S4R Owner spot the difference Ok so i collected this on Saturday, i have done a little online research but would be interested to know how much of this is non stock. Rearsets are an obvious one and i removed the rear pillion pegs, i also think the exhaust is routed diffrent from a standard S4R. Mirrors are terrible so i am guessing not original either. Anything else? free photo upload post image online image hosting without account

16-02-2015, 10:29 PM	#2
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,713	correct on all counts: silencers side by side , rather than stacked. de-cat link pipes, cycle cat rearsets. (probably) rizoma mirrors. samco radiator hoses. painted teatray. clear rear lens. aftermarket clutch/brake levers. carbon clutch cover/number-plate bracket/stick-on tank pad & (i think) radiator side plates/chainguard looks like someone (very sensibly) has added radiator and oil cooler guards looks like a nice clean bike ... & hello and welcome :-) Last edited by slob; 16-02-2015 at 10:45 PM..

17-02-2015, 09:11 AM	#3
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,025	Those brake/clutch levers are Ducati Performance by DPM. The carbon radiator side plates are S4 not S4R I think. The S4R ones are nicer. Nice bike though! __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

17-02-2015, 09:38 AM	#4
Capo You Are What You Is Join Date: May 2005 Location: A Foward Location Bike: S4r Posts: 1,948	The exhaust is a full 50mm DP item and came as part of a kit that included SPS cams and ECU. I have this system and is the first time I have seen another

17-02-2015, 11:53 AM	#5
Nosillad Guest Posts: n/a	Thanks for the feedback @Capo what are the sps cams? and could you tell if you have them without stripping the engine? Sounds loud and personally i prefer the under seat confg over the stock so not fussed either way. and i presume tea tray is the rear lights bit??

17-02-2015, 02:37 PM	#6
alan s4 Registered User Join Date: Sep 2013 Location: Glasgow Bike: S4 challenge Posts: 447	and i presume tea tray is the rear lights bit?? Yes - now chop it off like the rest of the cool crowd

17-02-2015, 05:59 PM	#8
Capo You Are What You Is Join Date: May 2005 Location: A Foward Location Bike: S4r Posts: 1,948	It cost £1433 (in 2004) not including fitting the cams and thats an engine out and heads off job. If you can get the number(s) off the ECU, I can tell you if it is the DP item. The fitted kit increases the horse power from 113 to 121, limiter is at 10.5k (500 above the std ecu) I actually have this system surplus to requirements less the cams as I had it replicated in titanium and use a Nemesis ECU. SPS cams are hard to find these days.

17-02-2015, 10:24 PM	#9
Nosillad Guest Posts: n/a	Thanks for the feedback, chuffed with the exhaust as it's always nice to get something you had no idea was a bonus . Loving the open clutch look on those pics as well. May as well continue the trend of the previous owner and start with just a couple of small mods........ahem!