Resist, Resist!

bigredduke · 18-04-2018, 05:52 PM

I bought a pair of Panigale LED rear indicators to fit on the Monster. They are smaller than the standard ones & I thought they would fit better with the pillion grab rails (which they do). I understood that they were 'plug & play' and either were fitted with integral resistors or had inline ones fitted.

WRONG! they flash too quickly so I guess I will have to fit some resistors. I would like some inline ones which utilise the existing connectors as I don't really want to chop the wiring. So, is this the way to go & if so, anyone know of a supplier?

Thanks

jonzi · 18-04-2018, 06:12 PM

I have some from Rizoma blinkers I put on my bike, not used the resistors.

you are more than welcome to them, if you want to PM me your address

Luddite · 18-04-2018, 06:17 PM

Desmoworld have a good selection.

Full details and links in your earlier thread:

http://www.ukmonster.co.uk/monster/s...ad.php?t=55912

By the way, did you try the indicators with the engine running? My LEDs flash double speed until the engine is actually running.

Darren69 · 18-04-2018, 07:13 PM

You could always just get an uprated LED flasher unit?

Luddite · 18-04-2018, 08:03 PM

Quote:

Originally Posted by Darren69

You could always just get an uprated LED flasher unit?

Sadly not that simple, Darren. The Evo's indicators are governed by the ECU - no separate flasher unit involved.

Albie · 18-04-2018, 08:44 PM

If I remember my 1100 needed two resistors to the rizoma. My scrambler however using same rizoma indicators needed none I got them from moorespeed to fit Ducati terminals

buzzbomb · 18-04-2018, 08:56 PM

BRD I've got panigale indicators on my 1100s and all I did was purchase a pair of resistors from Chris (your room mate at the weekender) and bingo all works perfect.

bigredduke · 19-04-2018, 09:13 PM

Quote:

Originally Posted by jonzi

I have some from Rizoma blinkers I put on my bike, not used the resistors.

you are more than welcome to them, if you want to PM me your address

Thank you so much for your kind offer. Unless they are now different, the Rizoma resistors are small, gold, rectangular jobbies which require soldering. I would really like ones which simply plug in to the existing wiring for simplicity.

jonzi · 19-04-2018, 09:18 PM

They might not be Rizoma, I can't remember now, but pretty sure they are.

bigredduke · 19-04-2018, 09:27 PM

Thanks Luddite & Buzzbomb. My German is non-existent. Do I need 2 x option 1 or 2 x option 2?

http://www.desmoworld.com/shop/desmo...derstand.html#

Darren69 · 20-04-2018, 05:12 AM

You can select english right at the top, if that helps?

http://www.desmoworld.com/shop/desmo..._from_store=de

20-04-2018, 07:29 AM

Quote:

Originally Posted by bigredduke

Thanks Luddite & Buzzbomb. My German is non-existent. Do I need 2 x option 1 or 2 x option 2?

http://www.desmoworld.com/shop/desmo...derstand.html#

The price shown is per pair. (Preis pro Paar)
Option 1 (Rundstecker) is with connector.
Option 2 Is open ended with a bit of heatshrink tubing.
Take a look at the other pictures to check the connector suits what you have.

slob · 20-04-2018, 07:59 AM

Quote:

Originally Posted by jonzi

They might not be Rizoma, I can't remember now, but pretty sure they are.

Yep, part of the Rizoma kit

Luddite · 20-04-2018, 09:37 AM

Quote:

Originally Posted by bigredduke

Thanks Luddite & Buzzbomb. My German is non-existent. Do I need 2 x option 1 or 2 x option 2?

Option 1 is equivalent to what comes with the Ducati Performance kit.

However, you said you've fitted OE Panigale indicators so I presume they come with the standard Ducati black, square connector?

If that's the case, then neither of the two Desmoworld options will be 'plug-and-play'.

What I suggest you do is get a pair of the option 1 resistors with a set of these €2 male bullet connectors:

https://www.desmoworld.com/stecker-fuer-blinker-1622

You can then cut the OE connector off the Panigale indicators and replace it with the bullets, which will then allow you to plug them into the resistors.

Alternatively, if you're feeling more ambitious, you could get a set of option 2 resistors (with the bare wires) and attach a genuine Ducati-style connector from here:

http://kojaycat.co.uk/epages/9500004...-BLK-INDI-CONN

However, they're more expensive, harder to attach and not really necessary as even the Ducati Performance kit uses the bullet connectors and has never caused me any problems over the past five years.

buzzbomb · 20-04-2018, 04:45 PM

BRD I spoke with Chris today and he's putting a pair in with my order which is due out shortly, I'll pm you when they arrive and pop them in the post.

18-04-2018, 05:52 PM	#1
bigredduke Nothing to see here Join Date: May 2005 Location: brough Bike: M1100evo Posts: 1,546	Resist, Resist! I bought a pair of Panigale LED rear indicators to fit on the Monster. They are smaller than the standard ones & I thought they would fit better with the pillion grab rails (which they do). I understood that they were 'plug & play' and either were fitted with integral resistors or had inline ones fitted. WRONG! they flash too quickly so I guess I will have to fit some resistors. I would like some inline ones which utilise the existing connectors as I don't really want to chop the wiring. So, is this the way to go & if so, anyone know of a supplier? Thanks

18-04-2018, 06:12 PM	#2
jonzi Mary Mary Quite Contrary Join Date: Mar 2012 Location: Berkhamsted Bike: M796 Posts: 1,398	I have some from Rizoma blinkers I put on my bike, not used the resistors. you are more than welcome to them, if you want to PM me your address __________________ #48

18-04-2018, 07:13 PM	#4
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	You could always just get an uprated LED flasher unit? __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

18-04-2018, 08:44 PM	#6
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,030	If I remember my 1100 needed two resistors to the rizoma. My scrambler however using same rizoma indicators needed none I got them from moorespeed to fit Ducati terminals __________________ http://albies93m900.blogspot.co.uk/

19-04-2018, 09:18 PM	#9
jonzi Mary Mary Quite Contrary Join Date: Mar 2012 Location: Berkhamsted Bike: M796 Posts: 1,398	They might not be Rizoma, I can't remember now, but pretty sure they are. __________________ #48

18-04-2018, 06:17 PM	#3
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	Desmoworld have a good selection. Full details and links in your earlier thread: http://www.ukmonster.co.uk/monster/s...ad.php?t=55912 By the way, did you try the indicators with the engine running? My LEDs flash double speed until the engine is actually running.

18-04-2018, 08:56 PM	#7
buzzbomb Gold Member Join Date: Mar 2009 Location: widnes Bike: M1100s Posts: 780	BRD I've got panigale indicators on my 1100s and all I did was purchase a pair of resistors from Chris (your room mate at the weekender) and bingo all works perfect.

19-04-2018, 09:27 PM	#10
bigredduke Nothing to see here Join Date: May 2005 Location: brough Bike: M1100evo Posts: 1,546	Thanks Luddite & Buzzbomb. My German is non-existent. Do I need 2 x option 1 or 2 x option 2? http://www.desmoworld.com/shop/desmo...derstand.html#

20-04-2018, 05:12 AM	#11
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,022	You can select english right at the top, if that helps? http://www.desmoworld.com/shop/desmo..._from_store=de __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

20-04-2018, 04:45 PM	#15
buzzbomb Gold Member Join Date: Mar 2009 Location: widnes Bike: M1100s Posts: 780	BRD I spoke with Chris today and he's putting a pair in with my order which is due out shortly, I'll pm you when they arrive and pop them in the post.