Monster rustoration

crust · 08-07-2020, 06:59 PM

So back in 2014 I got back from a trip rode the Monster into the garage, parked it in a corner and put a cover over it.

Roll on to 2020 and the garage needs the roof replacing so I'm cleaning some of the ~~crap~~ usefull stuff out and generally tidying up

I needed to get into the corner so tried to move the big green canvas lump, nope - not having it. Lift the cover and the tyres are flat. Fire up the compressor and add a dollop of air - tadaa it moves.

Still in the way, so into the back garden it goes.

Sitting having a break, hmmm, could do with a wash, so here we go.

crust · 08-07-2020, 07:03 PM

Pre-wash

20200705_154146 by crust, on Flickr

A good dosing of SDOC and Rhino goo and she's looking, well, a bit better. She's always been like her owner - a bit scruffy and held together by random bits of metal.

20200705_170120 by crust, on Flickr

crust · 08-07-2020, 07:06 PM

Some bits came up quite well.

Before

Swinging arm before by crust, on Flickr

After

Swinging arm clean by crust, on Flickr

crust · 08-07-2020, 07:10 PM

Some bits were up to Ducati's usual paint standard

20200705_170211 by crust, on Flickr

20200705_170221 by crust, on Flickr

Frame's developed a decent red rash, now where'd I put the hammerite

20200705_170235 by crust, on Flickr

crust · 08-07-2020, 07:16 PM

Giving her a wash, made me smile as I remembered places we'd been, fun we'd had. Didn't look too bad, so a bit of a plan was hatched.

A quick mechanical resto with maybe a more cosmetic job over the winter. The deal breaker would be the state of the carbs and how much de-gunging would be required. So back in the garage and a quick delve.

20200705_180700 by crust, on Flickr

Carbs on bench.

20200705_182131 by crust, on Flickr

crust · 08-07-2020, 07:19 PM

Float bowls off and wow, I mean wow. Spotless inside.

20200705_182608 by crust, on Flickr

crust · 08-07-2020, 07:21 PM

So impressed with the carbs I reached for the solvol.

20200706_174031 by crust, on Flickr

20200706_182930 by crust, on Flickr

crust · 08-07-2020, 07:35 PM

Next steps.

Ordered some exactfit belts and tensioner bearings. Pick up battery, filter and oil locally.

Blow carbs through just in case, oil and filter change - see how she runs.

If that's successful, change brake fluid and chance an MOT.

I think the chain and sprockets may need a change or maybe just the chain (I know but dicking around with gearing has got them out of sequence).

When's the next WDW?

Darren69 · 08-07-2020, 07:49 PM

That chrome came up better than it had any right to do. You may just have caught it in time?

Mr Gazza · 08-07-2020, 08:44 PM

Nice work... Lucky with the carbs.

Is it an S with cast iron discs? or have the stainless ones gone ochre over the time?
I notice that there is a brighter patch where the pads rested, they are going to need some long hard braking sessions before they pull evenly!

Be careful on those old tyres that have sat flat for X months. They will be hard and misshaped, they will not only feel awful but won't have the grip they once did. They would be the first thing I would bin.
Nice bike though, I bet its nice to get re-acquainted.

Darren69 · 08-07-2020, 08:56 PM

The rotor pattern is wrong for the cast iron discs, I think sadly from the pattern they are the standard steel ones gone rusty, and I don't think it's an S but nice flatslide carbs though!

utopia · 08-07-2020, 09:30 PM

Quote:

Originally Posted by crust

.... back in 2014 I got back from a trip .....

I'm guessing that was the WDW trip, where our paths crossed ?
I'm surprised to hear that you've not ridden it since then.
A fair few of the same group have repeated the trip in 2016 / 18 ..... but obviously not this year.
Maybe next time ?
Good to hear that you've dug the old girl out.

Flip · 08-07-2020, 10:33 PM

Blimey Mr Crust I don’t think I’ve ever seen it looking so clean ....... and that was before you err cleaned it

Anyone that’s ridden with the aforementioned Mr Crust can only wonder how much faster it might go if it was slippery clean.

Keep it dirty & give us a chance I say

crust · 09-07-2020, 07:44 AM

Thanks, guys.

It was a bog standard M900.

Chrome impressed me as well, that'll be the Germans for you.

The disks are standard rusty ones, I'll give them a quick rub down with some fine wet and dry then finish off the pads before fitting new ones.

I've got a set of scrubs coming from a mate so the current ones will be binned if they're no good. They've got to come off soon-ish for the wheels to be painted.

The carbs were an ebay bargain - I had a search saved and they popped up 'buy it now' at a cheap price. Great mod, really bring the engine alive and give better consumption.

Utopia - it probably was, good trip. I had two other bikes on the go that sucked up time and funds plus I got into mountain biking so the poor old Monster lost out.

Hi Flip, I'm sure it won't stay that clean for long

The layer of dirt and oil seems to have preserved it quite well. Pah, Mrs Filthy laughs in the face of your ACF50.

Albie · 09-07-2020, 10:12 AM

Silver foil brings chrome back. Chrome is just a fine layer and does not rust. Only metal beneath will rust but keep on top of it and will keep it down. Glad your bringing it back alive.

08-07-2020, 06:59 PM	#1
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Monster rustoration So back in 2014 I got back from a trip rode the Monster into the garage, parked it in a corner and put a cover over it. Roll on to 2020 and the garage needs the roof replacing so I'm cleaning some of the ~~crap~~ usefull stuff out and generally tidying up I needed to get into the corner so tried to move the big green canvas lump, nope - not having it. Lift the cover and the tyres are flat. Fire up the compressor and add a dollop of air - tadaa it moves. Still in the way, so into the back garden it goes. Sitting having a break, hmmm, could do with a wash, so here we go.

08-07-2020, 07:49 PM	#9
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,089	That chrome came up better than it had any right to do. You may just have caught it in time? __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

08-07-2020, 08:44 PM	#10
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,961	Nice work... Lucky with the carbs. Is it an S with cast iron discs? or have the stainless ones gone ochre over the time? I notice that there is a brighter patch where the pads rested, they are going to need some long hard braking sessions before they pull evenly! Be careful on those old tyres that have sat flat for X months. They will be hard and misshaped, they will not only feel awful but won't have the grip they once did. They would be the first thing I would bin. Nice bike though, I bet its nice to get re-acquainted. __________________

08-07-2020, 08:56 PM	#11
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,089	The rotor pattern is wrong for the cast iron discs, I think sadly from the pattern they are the standard steel ones gone rusty, and I don't think it's an S but nice flatslide carbs though! __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

08-07-2020, 10:33 PM	#13
Flip Registered User Join Date: Mar 2010 Location: Beachtown Bike: M900 Posts: 2,188	Blimey Mr Crust I don’t think I’ve ever seen it looking so clean ....... and that was before you err cleaned it Anyone that’s ridden with the aforementioned Mr Crust can only wonder how much faster it might go if it was slippery clean. Keep it dirty & give us a chance I say __________________ You're perfect, yes, it's true- But without me you're only you!

08-07-2020, 07:03 PM	#2
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Pre-wash 20200705_154146 by crust, on Flickr A good dosing of SDOC and Rhino goo and she's looking, well, a bit better. She's always been like her owner - a bit scruffy and held together by random bits of metal. 20200705_170120 by crust, on Flickr

08-07-2020, 07:06 PM	#3
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Some bits came up quite well. Before Swinging arm before by crust, on Flickr After Swinging arm clean by crust, on Flickr

08-07-2020, 07:10 PM	#4
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Some bits were up to Ducati's usual paint standard 20200705_170211 by crust, on Flickr 20200705_170221 by crust, on Flickr Frame's developed a decent red rash, now where'd I put the hammerite 20200705_170235 by crust, on Flickr

08-07-2020, 07:16 PM	#5
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Giving her a wash, made me smile as I remembered places we'd been, fun we'd had. Didn't look too bad, so a bit of a plan was hatched. A quick mechanical resto with maybe a more cosmetic job over the winter. The deal breaker would be the state of the carbs and how much de-gunging would be required. So back in the garage and a quick delve. 20200705_180700 by crust, on Flickr Carbs on bench. 20200705_182131 by crust, on Flickr

08-07-2020, 07:19 PM	#6
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Float bowls off and wow, I mean wow. Spotless inside. 20200705_182608 by crust, on Flickr

08-07-2020, 07:21 PM	#7
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	So impressed with the carbs I reached for the solvol. 20200706_174031 by crust, on Flickr 20200706_182930 by crust, on Flickr

08-07-2020, 07:35 PM	#8
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Next steps. Ordered some exactfit belts and tensioner bearings. Pick up battery, filter and oil locally. Blow carbs through just in case, oil and filter change - see how she runs. If that's successful, change brake fluid and chance an MOT. I think the chain and sprockets may need a change or maybe just the chain (I know but dicking around with gearing has got them out of sequence). When's the next WDW?

09-07-2020, 07:44 AM	#14
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	Thanks, guys. It was a bog standard M900. Chrome impressed me as well, that'll be the Germans for you. The disks are standard rusty ones, I'll give them a quick rub down with some fine wet and dry then finish off the pads before fitting new ones. I've got a set of scrubs coming from a mate so the current ones will be binned if they're no good. They've got to come off soon-ish for the wheels to be painted. The carbs were an ebay bargain - I had a search saved and they popped up 'buy it now' at a cheap price. Great mod, really bring the engine alive and give better consumption. Utopia - it probably was, good trip. I had two other bikes on the go that sucked up time and funds plus I got into mountain biking so the poor old Monster lost out. Hi Flip, I'm sure it won't stay that clean for long The layer of dirt and oil seems to have preserved it quite well. Pah, Mrs Filthy laughs in the face of your ACF50.

09-07-2020, 10:12 AM	#15
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Silver foil brings chrome back. Chrome is just a fine layer and does not rust. Only metal beneath will rust but keep on top of it and will keep it down. Glad your bringing it back alive. __________________ http://albies93m900.blogspot.co.uk/