Hi all Newbie from lincs. - Page 4

Albie · 21-07-2020, 05:11 PM

Quote:

Originally Posted by brian900m

Back again with another silly question - should the frame and engine numbers match ?

I'm sure this has been asked before but I couldn't find anything after a search.

Mine dont.

21-07-2020, 06:35 PM

Thanks Albie.

I shall be tidying up my bike in stages and mainly over the winter - if it looks half as good as yours I'll be happy!

Darkness · 21-07-2020, 08:17 PM

Quote:

Originally Posted by brian900m

Back again with another silly question - should the frame and engine numbers match ?

I'm sure this has been asked before but I couldn't find anything after a search.

The same engines were used in the 900SS, so matching numbers would be very suspicious!

02-08-2020, 11:20 AM

I've decided to strip the bike down and give it a refresh! Why - well having ridden it and parked up there was smoke coming from underside of the engine! On investigation it appears there's oil coming from somewhere from the front cylinder which had dripped down onto the hot exhaust pipe.

Now, I'm no Ducati buff, but thought their engines were oil tight? It looks like the oil is coming from the cylinder head joint but cant be sure so as I shall be removing the engine for a better look and thought I might as well go the whole hog and strip the bike down completely.

Has anyone else experienced an similar oil leak?

350TSS · 02-08-2020, 11:38 AM

Before stripping it I would check the oil filter which can sometimes leak (even proper Ducati ones) and could drip onto the exhaust. Also the oil cooler unions/pipes may be the culprit.
If you are stripping then you will need a socket/spanner that can get the head nuts off/torqued up again

02-08-2020, 04:49 PM

Leak isn't from the filter or unions 350 - seems to be from the head/barrel area. After further stripping of the bike I've noticed that there appears to be an oil leakage from one of the rear cylinder head studs as well!

Darren69 · 03-08-2020, 06:47 AM

Could be broken head studs? A common problem with those 900s

04-08-2020, 11:20 AM

Thanks Darren - for a 26yr old bike with numerous previous owners I guessed I'd come across some odd bit of trouble. Having said that its not in bad condition for 25,000 miles. Shall be removing the engine and stripping the bike to get the frame repainted so it will give me a chance to inspect the engine more closely.

pooh · 04-08-2020, 12:18 PM

Hi Brian
welcome to the fraternity look forward to meeting up sometime I have the Haynes manual which covers pretty much all of the early monsters.

pooh · 04-08-2020, 12:22 PM

Brian
probably the o ring at the bottom of the rear cylinder on the clutch side or as previously said it could be a snapped stud but iv'e usually found them on the horizontal cylinder.

04-08-2020, 07:24 PM

Hi Pooh

Thanks for the offer but I've already invested in a Haynes manual - and its already got greasy paw marks on it!

You could well be right about the cylinder studs - the previous owner did mention that he'd replaced a couple. Did wonder whether he's missed off any O rings - we shall see!

Yes - have to meet up sometime when I get the bike finished !

03-08-2020, 06:47 AM	#52
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Could be broken head studs? A common problem with those 900s __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

04-08-2020, 12:18 PM	#54
pooh Lincolnshire Area Rep Join Date: Oct 2002 Location: Grimsby Bike: M900ie Posts: 471	Hi Brian welcome to the fraternity look forward to meeting up sometime I have the Haynes manual which covers pretty much all of the early monsters. __________________ Slighty less brain cells than I was born with

04-08-2020, 12:22 PM	#55
pooh Lincolnshire Area Rep Join Date: Oct 2002 Location: Grimsby Bike: M900ie Posts: 471	Brian probably the o ring at the bottom of the rear cylinder on the clutch side or as previously said it could be a snapped stud but iv'e usually found them on the horizontal cylinder. __________________ Slighty less brain cells than I was born with

21-07-2020, 06:35 PM	#47
brian900m Guest Posts: n/a	Thanks Albie. I shall be tidying up my bike in stages and mainly over the winter - if it looks half as good as yours I'll be happy!

02-08-2020, 11:20 AM	#49
brian900m Guest Posts: n/a	I've decided to strip the bike down and give it a refresh! Why - well having ridden it and parked up there was smoke coming from underside of the engine! On investigation it appears there's oil coming from somewhere from the front cylinder which had dripped down onto the hot exhaust pipe. Now, I'm no Ducati buff, but thought their engines were oil tight? It looks like the oil is coming from the cylinder head joint but cant be sure so as I shall be removing the engine for a better look and thought I might as well go the whole hog and strip the bike down completely. Has anyone else experienced an similar oil leak?

02-08-2020, 11:38 AM	#50
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,422	Before stripping it I would check the oil filter which can sometimes leak (even proper Ducati ones) and could drip onto the exhaust. Also the oil cooler unions/pipes may be the culprit. If you are stripping then you will need a socket/spanner that can get the head nuts off/torqued up again

02-08-2020, 04:49 PM	#51
brian900m Guest Posts: n/a	Leak isn't from the filter or unions 350 - seems to be from the head/barrel area. After further stripping of the bike I've noticed that there appears to be an oil leakage from one of the rear cylinder head studs as well!

04-08-2020, 11:20 AM	#53
brian900m Guest Posts: n/a	Thanks Darren - for a 26yr old bike with numerous previous owners I guessed I'd come across some odd bit of trouble. Having said that its not in bad condition for 25,000 miles. Shall be removing the engine and stripping the bike to get the frame repainted so it will give me a chance to inspect the engine more closely.

04-08-2020, 07:24 PM	#56
brian900m Guest Posts: n/a	Hi Pooh Thanks for the offer but I've already invested in a Haynes manual - and its already got greasy paw marks on it! You could well be right about the cylinder studs - the previous owner did mention that he'd replaced a couple. Did wonder whether he's missed off any O rings - we shall see! Yes - have to meet up sometime when I get the bike finished !