Project M900Sie Refresh! - Page 4

03-04-2015, 10:43 PM

ive got an integrated light on the way

..... there are brackets for the indicators under the seat though!

.... its on the list XD. z

Dirty · 03-04-2015, 10:45 PM

Ah, yes you'll probably need a separate solution for MOT time

03-04-2015, 10:47 PM

i have the facility to chuck some on for mot..... not a problem

. have to get em to work as indicators first. im stumped.

gary tompkins · 04-04-2015, 05:54 PM

Check numberplate clearance from tyre

I had to angle my plate up a lot to clear it on full compression over bumps - first attempt got smashed

You'll also need a rear reflector as the lack of one is an MOT fail

17-04-2015, 10:04 PM

Well, I've finally got sick of the electrical gremlins I was having, and decided to do something about it......

So, today, this happened.......

Yep, that's my bike...... And yep, that's my bikes wiring loom on the ramp in front. There were poorly spliced wires, insulation tape, and ****e all over it. Connectors were corroded and in poor condition too! Currently splitting the entire thing, drying it out (it's soaking inside!) and sorting all the previous bodges out. I need to find a new throttle position sensor connector as mine is ruined. If anyone knows what type it is, let me know!

I've also put the injectors in a special sonic cleaner that pulses them in time with the sonic waves, and my God, the crap that came out of them was unreal. The one wasn't even spraying properly. The throttle bodies are a bit dirty too, so they're coming off Monday and are going in the big sonic tank for a few hours.

It's a big step stripping the bike this much myself, but I'm loving every second of it!

.

Dirty · 18-04-2015, 08:22 AM

Nice garage you've got there!

Mr Gazza · 18-04-2015, 11:16 AM

You're doing the right thing....Would have been endless gremlins waiting to strike.!

18-04-2015, 11:37 AM

Yeah, that's the college bike workshop. They usually don't let first years bring their own stuff in, but me and the tutor seem to hit it off at the start of term and I can pretty much do as I please..... It does help that I'm not a total spanner like some of the others mind XD.

Can't wait to get back in Monday and keep at it..... Just need to find out what type of connector is on the tps now!

Also, there's a tutor that does the evening classes that used to be a master tech for Ducati...... He's doing my valve clearances next week!

. It's not what you know, it's who you know!

07-07-2015, 05:26 PM

Well, I've not updated this in a few months, and I'll do a big update tomorrow. I just wanted to say that well..... This happened today:

. Yes, they're going to be a pain in the ass, and take major work to fit. And yes I need to get them re-anodised at some point. But I got them for a steal, (sub £100) and they're in decent Nick. Found another pair in the same condition for over £700 on eBay!

22-07-2015, 06:06 PM

Update time! Due to a lovely person on here giving a new shape rear light away, I now have this....

What do you guys think? The blue piece behind will be black in the next few days (left the protect coating on the alu bracket I made)

23-07-2015, 12:59 AM

Quote:

Originally Posted by JMH900sie

What do you guys think? The blue piece behind will be black in the next few days (left the protect coating on the alu bracket I made)

I think it looks very cool! Have you got it working yet?

23-07-2015, 08:29 AM

Not yet, I need to go and get a connector and some wire so I can build a new loom for it. That'll get done today

!

Dirty · 26-07-2015, 12:08 AM

2 wheelie bins, not bad, good start

06-10-2015, 07:39 PM

Well, this finally happened today and I'm ecstatic!

The ohlins forks are sublime and have completely transformed how the bike performs. The front feels as stable as a rock! She's much comfier too!

Also fitted a new clutch including basket and she revs so much more freely now.

Front fender has been ordered (carbon unit off an rsvr Mille aprillia!) as the standard one wouldn't fit due to different mounts. I've also ordered a set of renthal flat bars for it to get rid of that crazy supermoto stance (even though it looks much better in person!)

Thanks guys!

Joe

10-11-2015, 07:51 PM

Well, I dynoed the bike today and I'm very pleased with the HP figure,

81.4hp for a 15 year old, well used bike.... Very pleased with this as a starting point.

I've ordered a power commander 3, a k&n and I'm going to have the flywheel lightened just a little...... Well quite a lot actually!

She's also due a major service, so the engines coming out next week for a belt change..... But I'm also going to paint it and sort the valve clearances out at the same time.....

I'd love to see 100hp eventually, but gaining 20% power is going to be a long road I think!

03-04-2015, 10:45 PM	#47
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	Ah, yes you'll probably need a separate solution for MOT time __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

04-04-2015, 05:54 PM	#49
gary tompkins 1/2 man - 1/2 pogo-stick Join Date: Aug 2002 Location: Dartford, Kent Bike: M900ie Posts: 7,241	Check numberplate clearance from tyre I had to angle my plate up a lot to clear it on full compression over bumps - first attempt got smashed You'll also need a rear reflector as the lack of one is an MOT fail __________________ GT Fully paid up member of the S.A.S. (Scottoiler Appreciation Society) 27,000 miles on original chain - and still going strong! Last edited by gary tompkins; 04-04-2015 at 05:57 PM..

18-04-2015, 08:22 AM	#51
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	Nice garage you've got there! __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

26-07-2015, 12:08 AM	#58
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	2 wheelie bins, not bad, good start __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

03-04-2015, 10:43 PM	#46
JMH900sie Guest Posts: n/a	ive got an integrated light on the way ..... there are brackets for the indicators under the seat though! .... its on the list XD. z

03-04-2015, 10:47 PM	#48
JMH900sie Guest Posts: n/a	i have the facility to chuck some on for mot..... not a problem . have to get em to work as indicators first. im stumped.

17-04-2015, 10:04 PM	#50
JMH900sie Guest Posts: n/a	Well, I've finally got sick of the electrical gremlins I was having, and decided to do something about it...... So, today, this happened....... Yep, that's my bike...... And yep, that's my bikes wiring loom on the ramp in front. There were poorly spliced wires, insulation tape, and ****e all over it. Connectors were corroded and in poor condition too! Currently splitting the entire thing, drying it out (it's soaking inside!) and sorting all the previous bodges out. I need to find a new throttle position sensor connector as mine is ruined. If anyone knows what type it is, let me know! I've also put the injectors in a special sonic cleaner that pulses them in time with the sonic waves, and my God, the crap that came out of them was unreal. The one wasn't even spraying properly. The throttle bodies are a bit dirty too, so they're coming off Monday and are going in the big sonic tank for a few hours. It's a big step stripping the bike this much myself, but I'm loving every second of it! .

18-04-2015, 11:16 AM	#52
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,983	You're doing the right thing....Would have been endless gremlins waiting to strike.!

18-04-2015, 11:37 AM	#53
JMH900sie Guest Posts: n/a	Yeah, that's the college bike workshop. They usually don't let first years bring their own stuff in, but me and the tutor seem to hit it off at the start of term and I can pretty much do as I please..... It does help that I'm not a total spanner like some of the others mind XD. Can't wait to get back in Monday and keep at it..... Just need to find out what type of connector is on the tps now! Also, there's a tutor that does the evening classes that used to be a master tech for Ducati...... He's doing my valve clearances next week! . It's not what you know, it's who you know!

07-07-2015, 05:26 PM	#54
JMH900sie Guest Posts: n/a	Well, I've not updated this in a few months, and I'll do a big update tomorrow. I just wanted to say that well..... This happened today: . Yes, they're going to be a pain in the ass, and take major work to fit. And yes I need to get them re-anodised at some point. But I got them for a steal, (sub £100) and they're in decent Nick. Found another pair in the same condition for over £700 on eBay!

22-07-2015, 06:06 PM	#55
JMH900sie Guest Posts: n/a	Update time! Due to a lovely person on here giving a new shape rear light away, I now have this.... What do you guys think? The blue piece behind will be black in the next few days (left the protect coating on the alu bracket I made)

23-07-2015, 08:29 AM	#57
JMH900sie Guest Posts: n/a	Not yet, I need to go and get a connector and some wire so I can build a new loom for it. That'll get done today !

06-10-2015, 07:39 PM	#59
JMH900sie Guest Posts: n/a	Well, this finally happened today and I'm ecstatic! The ohlins forks are sublime and have completely transformed how the bike performs. The front feels as stable as a rock! She's much comfier too! Also fitted a new clutch including basket and she revs so much more freely now. Front fender has been ordered (carbon unit off an rsvr Mille aprillia!) as the standard one wouldn't fit due to different mounts. I've also ordered a set of renthal flat bars for it to get rid of that crazy supermoto stance (even though it looks much better in person!) Thanks guys! Joe

10-11-2015, 07:51 PM	#60
JMH900sie Guest Posts: n/a	Well, I dynoed the bike today and I'm very pleased with the HP figure, 81.4hp for a 15 year old, well used bike.... Very pleased with this as a starting point. I've ordered a power commander 3, a k&n and I'm going to have the flywheel lightened just a little...... Well quite a lot actually! She's also due a major service, so the engines coming out next week for a belt change..... But I'm also going to paint it and sort the valve clearances out at the same time..... I'd love to see 100hp eventually, but gaining 20% power is going to be a long road I think!