M1000 track bike - Page 4

04-04-2013, 01:28 PM

Cheers utopia - at my age I'm too thick-skinned to care!

Thuli · 04-04-2013, 01:37 PM

Zhango... I've met JP once or twice and I'm sure he meant that in the nicest possible way and/or he's secretly envious of your technical know-how.

Black Bob... 'Greedy' you say? You should see him when there're biscuits about!

04-04-2013, 02:57 PM

Thanks Thuli but it's fine - in fact JP has just made a very knowledgeable post about ECU remapping (a bit nerdy perhaps?

)
None of us know everything but if we all share the little bits of knowledge that we have then we all benefit - many posts are opinion anyway and life would be boring if we all agreed.

J.P · 04-04-2013, 03:41 PM

Quote:

Originally Posted by zhango

None of us know everything .

You've not met my wife then.

Albie · 04-04-2013, 03:49 PM

Quote:

Originally Posted by slob

...besides, where would I put it ?!

Erm I have 6 in mine and work space. Its hard to get there but when you do it works. Its a case of getting things in some order.

04-04-2013, 07:33 PM

Quote:

Originally Posted by J.P

You've not met my wife then.

No, I haven't had the pleasure.

.......I used to live with a similar knowledgeable woman though

Black Bob · 04-04-2013, 07:37 PM

Quote:

Originally Posted by Thuli

Black Bob... 'Greedy' you say? You should see him when there're biscuits about!

If I squint really hard, I can make that sound like an invite.

Grumpy · 04-04-2013, 07:46 PM

The biscuit tin is always open as Rob's and Thulis!

Darkness · 05-04-2013, 08:19 AM

Quote:

Originally Posted by J.P

** NERD ALERT !!

.

You shout "Nerd" like it's a bad thing.........

Darkness · 05-04-2013, 08:22 AM

Quote:

Originally Posted by J.P

You've not met my wife then.

You evidently don't know then?

Or was that intended to be rhetorical?

slob · 08-04-2013, 12:22 PM

A crank has been located and bought and a deal has been struck around some upgrade/repacement parts. I'll update in a few weeks when there's progress to report.

gary tompkins · 08-04-2013, 01:31 PM

Quote:

Originally Posted by Albie

Erm I have 6 in mine and work space. Its hard to get there but when you do it works. Its a case of getting things in some order.

Just try squeezing 2 trikes and 3 bikes in a single garage for a giggle

That really is a 3D jigsaw puzzle

slob · 17-04-2013, 11:56 PM

Picked the heads up this evening.

Slight improvement after pickling in some nasty chemicals, just about ready to paint...

they're shipping to the tuner in the morning.

I dropped the cases off for blasting while I was picking the heads up

they should be done in a week or so

18-04-2013, 12:13 AM

Heads look good - my hobby is old classic bikes with unpainted engines and I use an old Baby Burco boiler with hand washing powder for bare aluminium heads but I like the look of yours so what was the chemical used and does that remove the paint as well?
You're not going to blast the inside of the cases as well as outside surely?

final_edition · 18-04-2013, 02:16 AM

This place is good for getting things clean.

http://www.icmhome.org.uk/

04-04-2013, 01:37 PM	#47
Thuli Registered User Join Date: Mar 2010 Bike: No Bike Yet! Posts: 113	Zhango... I've met JP once or twice and I'm sure he meant that in the nicest possible way and/or he's secretly envious of your technical know-how. Black Bob... 'Greedy' you say? You should see him when there're biscuits about! Last edited by Thuli; 04-04-2013 at 01:48 PM..

04-04-2013, 02:57 PM	#48
zhango Guest Posts: n/a	Thanks Thuli but it's fine - in fact JP has just made a very knowledgeable post about ECU remapping (a bit nerdy perhaps?) None of us know everything but if we all share the little bits of knowledge that we have then we all benefit - many posts are opinion anyway and life would be boring if we all agreed.

04-04-2013, 07:46 PM	#53
Grumpy record breaker!! Join Date: Apr 2006 Location: Peterborough Bike: M1200R Posts: 2,155	The biscuit tin is always open as Rob's and Thulis! __________________ It's not the destination, but the journey that matters Definition of a motorbike, a devise for overtaking cars!

18-04-2013, 12:13 AM	#59
zhango Guest Posts: n/a	Heads look good - my hobby is old classic bikes with unpainted engines and I use an old Baby Burco boiler with hand washing powder for bare aluminium heads but I like the look of yours so what was the chemical used and does that remove the paint as well? You're not going to blast the inside of the cases as well as outside surely? Last edited by zhango; 18-04-2013 at 12:48 AM..

04-04-2013, 01:28 PM	#46
zhango Guest Posts: n/a	Cheers utopia - at my age I'm too thick-skinned to care!

08-04-2013, 12:22 PM	#56
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,737	A crank has been located and bought and a deal has been struck around some upgrade/repacement parts. I'll update in a few weeks when there's progress to report.

17-04-2013, 11:56 PM	#58
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,737	Picked the heads up this evening. Slight improvement after pickling in some nasty chemicals, just about ready to paint... they're shipping to the tuner in the morning. I dropped the cases off for blasting while I was picking the heads up they should be done in a week or so

18-04-2013, 02:16 AM	#60
final_edition Registered User Join Date: Mar 2012 Location: Bexley Bike: S4 Posts: 121	This place is good for getting things clean. http://www.icmhome.org.uk/