Keihin FCR or Mikuni TDMR - Page 4

Dukedesmo · 28-03-2018, 05:20 PM

Quote:

Originally Posted by Nasher

They are collection in person only from Hull

Think I'd rather go to Germany

Nasher

.

28-03-2018, 06:42 PM

Thanks for the link Darren I'll check it out tonight.

Definately not off to Hull either!

ibduke · 30-03-2018, 07:09 PM

I have 39 FCR'S, on my 600. Chalk and cheese the difference was tremendous. bought them from Chris at California cycle works. Even after import duty it was cheaper than buying them in GB.
Save up if you cant afford them straight away, there worth it.

03-04-2018, 11:09 AM

Yes I'm chasing up some through a friend in the trade

Chris no longer sells FCR's they are sold by Power Barn through Sudco - they will trade with UK but cannot include taxes

ibduke · 03-04-2018, 08:48 PM

Yes, I was taking to jim at Two Wheel Classics, He goes the FCR route from Sudco. When I did buy them from Chris They sorted there side out in USA, Then when they got over here I'd more to pay but it was still big savings rather than buying them in the uk. That was for the full kit including adaptors, carbs, cables,grip and air filter.

04-04-2018, 10:28 AM

Quote:

Originally Posted by ibduke

Yes, I was taking to jim at Two Wheel Classics, He goes the FCR route from Sudco. When I did buy them from Chris They sorted there side out in USA, Then when they got over here I'd more to pay but it was still big savings rather than buying them in the uk. That was for the full kit including adaptors, carbs, cables,grip and air filter.

Yes that's what I'm expecting.

Just holding onto the slim chance that my pal can hook me up with some at trade +%? but think these are rare / very popular so there's no wriggle room to be found. Even my friend uses Frank MX for stuff so that's a dependable option for Mikuni but my gut tells me Keihin's the way forward.

Love the thought of dropping £1600 into two carbs though

ibduke · 07-04-2018, 08:33 PM

Keihin or Japanese carbs in general have always been expensive. I remember working on honda accords and triumph acclaims. The Honda carbs were £1500, 15 year ago. The bolt on difference of these carbs is well worth it. you'll build the bike as you want it. It's only 150 single Chinese or Indian curries.....

Darren69 · 08-04-2018, 07:01 AM

Could the Mikuni TM 40mm flat slide be adapted? Those appear to be about 180 quid each. I think they might be for Harleys or other Jap big singles.

Darren69 · 08-04-2018, 07:18 AM

Or there is the Mikuni RS 40mm D1 K flat slides?

09-04-2018, 10:03 AM

Quote:

Originally Posted by ibduke

Keihin or Japanese carbs in general have always been expensive. I remember working on honda accords and triumph acclaims. The Honda carbs were £1500, 15 year ago. The bolt on difference of these carbs is well worth it. you'll build the bike as you want it. It's only 150 single Chinese or Indian curries.....

Just waiting on my annual appraisal at work after 5 months of being "at risk" I might now be inline for a rise.

Could end up parking the M900 project and buying a Mult......... who knows

ibduke · 13-04-2018, 06:52 PM

Carbs can be adapted. But by the time you have the correct adaptors, jetting, air filters, twist grip, cables, and everything else req to make it work you might as well have bought them....kits go straight on within a couple of hours including brews you will be on the road with a big smile on your face. No brainer to me if your keeping the bike..

Darren69 · 13-04-2018, 07:34 PM

I like how youve factored 'brew time' into the equation. We will probably need a more accurate estimate on what that equates to since he is building it in the kitchen!

jerry · 21-04-2024, 05:43 PM

Where is cheapest supply of Keihan FCR 39 kit for Monster 750??? i will touring in Germany in June ,, could save a bundle on VAT and import etc

also will I have to dump airbox and if so how to fit battery and coils ???if I did it ,, would it make the bike smoother, more responsive ,,etc or could I fit a 800 6 speed motor modified for carbs into 2000 M750 would it fit ??????

900Rebuilder · 22-04-2024, 08:17 AM

When I contacted a company in Germany they wouldn't supply outside of their borders so going in person should be much better.

You could also try Frank MX in the Netherlands as they often have them too

RichardDDuke · 22-04-2024, 08:47 AM

I've got 39mm FCRs on my 900/944 and have up to now kept the airbox. However, I'm now in the process of dumping the airbox and running K&N pod filters.
So, if you want to, you can keep the air box. You might need adapters for the airbox connections, but as the initial installation of the FCRs was by Baines in the late 90s, my memory might not be right.

P.S. I'm assuming the airboxes on the 900ss and M900 are the same.....

08-04-2018, 07:01 AM	#53
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Could the Mikuni TM 40mm flat slide be adapted? Those appear to be about 180 quid each. I think they might be for Harleys or other Jap big singles. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

08-04-2018, 07:18 AM	#54
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Or there is the Mikuni RS 40mm D1 K flat slides? __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

13-04-2018, 07:34 PM	#57
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	I like how youve factored 'brew time' into the equation. We will probably need a more accurate estimate on what that equates to since he is building it in the kitchen! __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

21-04-2024, 05:43 PM	#58
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,908	Where is cheapest supply of Keihan FCR 39 kit for Monster 750??? i will touring in Germany in June ,, could save a bundle on VAT and import etc also will I have to dump airbox and if so how to fit battery and coils ???if I did it ,, would it make the bike smoother, more responsive ,,etc or could I fit a 800 6 speed motor modified for carbs into 2000 M750 would it fit ?????? __________________ MONSTERMAN

22-04-2024, 08:17 AM	#59
900Rebuilder Registered User Join Date: Sep 2022 Location: Beeston Bike: M900 Posts: 330	When I contacted a company in Germany they wouldn't supply outside of their borders so going in person should be much better. You could also try Frank MX in the Netherlands as they often have them too __________________ Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW

28-03-2018, 06:42 PM	#47
Nottsbiker Guest Posts: n/a	Thanks for the link Darren I'll check it out tonight. Definately not off to Hull either!

30-03-2018, 07:09 PM	#48
ibduke Registered User Join Date: Jun 2014 Location: Preston Bike: M600 Posts: 37	I have 39 FCR'S, on my 600. Chalk and cheese the difference was tremendous. bought them from Chris at California cycle works. Even after import duty it was cheaper than buying them in GB. Save up if you cant afford them straight away, there worth it.

03-04-2018, 11:09 AM	#49
Nottsbiker Guest Posts: n/a	Yes I'm chasing up some through a friend in the trade Chris no longer sells FCR's they are sold by Power Barn through Sudco - they will trade with UK but cannot include taxes

03-04-2018, 08:48 PM	#50
ibduke Registered User Join Date: Jun 2014 Location: Preston Bike: M600 Posts: 37	Yes, I was taking to jim at Two Wheel Classics, He goes the FCR route from Sudco. When I did buy them from Chris They sorted there side out in USA, Then when they got over here I'd more to pay but it was still big savings rather than buying them in the uk. That was for the full kit including adaptors, carbs, cables,grip and air filter.

07-04-2018, 08:33 PM	#52
ibduke Registered User Join Date: Jun 2014 Location: Preston Bike: M600 Posts: 37	Keihin or Japanese carbs in general have always been expensive. I remember working on honda accords and triumph acclaims. The Honda carbs were £1500, 15 year ago. The bolt on difference of these carbs is well worth it. you'll build the bike as you want it. It's only 150 single Chinese or Indian curries.....

13-04-2018, 06:52 PM	#56
ibduke Registered User Join Date: Jun 2014 Location: Preston Bike: M600 Posts: 37	Carbs can be adapted. But by the time you have the correct adaptors, jetting, air filters, twist grip, cables, and everything else req to make it work you might as well have bought them....kits go straight on within a couple of hours including brews you will be on the road with a big smile on your face. No brainer to me if your keeping the bike..

22-04-2024, 08:47 AM	#60
RichardDDuke Registered User Join Date: Oct 2022 Location: Bedford Bike: Other Ducati Posts: 143	I've got 39mm FCRs on my 900/944 and have up to now kept the airbox. However, I'm now in the process of dumping the airbox and running K&N pod filters. So, if you want to, you can keep the air box. You might need adapters for the airbox connections, but as the initial installation of the FCRs was by Baines in the late 90s, my memory might not be right. P.S. I'm assuming the airboxes on the 900ss and M900 are the same..... Last edited by RichardDDuke; 22-04-2024 at 08:50 AM..