Make your own Case Saver - Page 4

boris · 03-02-2020, 05:37 PM

Found It -

Couldn't seem to upload the image but the link seems to work?

https://ibb.co/vsDF38d

boris · 03-02-2020, 05:54 PM

Nice one mate, glad to be of help..

Mr Gazza · 03-02-2020, 05:55 PM

Many thanks for saving that Boris. (You need to copy and paste the "BBCode full linked")
I was a few mm out here and there measuring the now curved and bent original.. Probably better amend the pencil drawing?

manwithredbike · 30-05-2020, 11:12 PM

I made and fitted one of these today. Used a mild steel radiator bracket, pre bent right angle for the mounting tabs and about 1.2mm thick so fairly easily cut and bent into the curve.
Couple of slight mods from the drawing needed. Where it passes the clutch slave cylinder, i had to cut a section out about 3 - 4 mm back to step it in as it was obstructing the rubber boot on the inside of the slave. Also, below the bottom mounting hole, there's a fairly substantial web on the engine casing which got in the road so i stopped the guard just at the bottom mounting tab.
Otherwise all fitted easy and the drawing was spot on. Many thanks for posting the diagram.

SteveG · 17-07-2020, 09:10 PM

Mr G. Thanks for the plans.. and thanks also to manwithredbike for the great tip on using an old radiator wall bracket. Spot on fit, easy to make and fit to my 97 M900 during a chain and sprocket change - a job that was well overdue.

hh93 · 26-05-2022, 08:15 AM

If anyone doesn't have the wherewithal to make there own I found a guy on FB who makes them from SS and sends them to the UK (from Romania) for €40 ish.

I took a risk and it arrived in about a week as he makes them to order and a trial fit shows me a bit of adjustment is required.

Edit: search for this guy on FB: Dragos - Leonard Panaitiu

slob · 26-05-2022, 08:50 AM

You can post a link Howard, just make it clear it's 'at your own risk'.
The first time someone has a bad experience, they'll shout loudly enough I'm sure.

03-02-2020, 05:37 PM	#46
boris More Tools! Join Date: Jun 2004 Location: Forres Bike: Multiple Monsters Posts: 297	Found It - Couldn't seem to upload the image but the link seems to work? https://ibb.co/vsDF38d __________________ Boris from Forres

03-02-2020, 05:54 PM	#47
boris More Tools! Join Date: Jun 2004 Location: Forres Bike: Multiple Monsters Posts: 297	Nice one mate, glad to be of help.. __________________ Boris from Forres Last edited by boris; 03-02-2020 at 05:58 PM..

03-02-2020, 05:55 PM	#48
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,961	Many thanks for saving that Boris. (You need to copy and paste the "BBCode full linked") I was a few mm out here and there measuring the now curved and bent original.. Probably better amend the pencil drawing? __________________ Last edited by Mr Gazza; 03-02-2020 at 05:58 PM..

30-05-2020, 11:12 PM	#49
manwithredbike aka Phil Join Date: Nov 2005 Location: derry Bike: M900 Posts: 376	I made and fitted one of these today. Used a mild steel radiator bracket, pre bent right angle for the mounting tabs and about 1.2mm thick so fairly easily cut and bent into the curve. Couple of slight mods from the drawing needed. Where it passes the clutch slave cylinder, i had to cut a section out about 3 - 4 mm back to step it in as it was obstructing the rubber boot on the inside of the slave. Also, below the bottom mounting hole, there's a fairly substantial web on the engine casing which got in the road so i stopped the guard just at the bottom mounting tab. Otherwise all fitted easy and the drawing was spot on. Many thanks for posting the diagram. __________________ .. ~ Last edited by manwithredbike; 30-05-2020 at 11:16 PM..

26-05-2022, 08:15 AM	#51
hh93 Member Join Date: Jul 2018 Location: Lincoln Bike: M620ie Posts: 116	If anyone doesn't have the wherewithal to make there own I found a guy on FB who makes them from SS and sends them to the UK (from Romania) for €40 ish. I took a risk and it arrived in about a week as he makes them to order and a trial fit shows me a bit of adjustment is required. Edit: search for this guy on FB: Dragos - Leonard Panaitiu __________________ Doris '03 620 Dark Horace 1980 onwards Harris Mag II Last edited by hh93; 26-05-2022 at 06:01 PM..

17-07-2020, 09:10 PM	#50
SteveG Registered User Join Date: Jan 2014 Location: Newbury Bike: Multiple Monsters Posts: 366	Mr G. Thanks for the plans.. and thanks also to manwithredbike for the great tip on using an old radiator wall bracket. Spot on fit, easy to make and fit to my 97 M900 during a chain and sprocket change - a job that was well overdue.

26-05-2022, 08:50 AM	#52
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,733	You can post a link Howard, just make it clear it's 'at your own risk'. The first time someone has a bad experience, they'll shout loudly enough I'm sure.