Back with a M900 series I - Page 31

Darkness · 17-01-2018, 10:15 PM

Bike fine, but how are you? When do you get the prognosis?

Albie · 17-01-2018, 10:48 PM

Quote:

Originally Posted by Darkness

Bike fine, but how are you? When do you get the prognosis?

I'm ok had the sigmoidoscopy last night and found just 1 polyp so cut it out. No bowel cancer yet it seems. It bloody hurt this time so much as I was sweating but nurse kept me cool as she could
They insert camera and blow gas to inflate the bowel so feels like you want to go to loo.
They only give pain injection on a colonoscopy they told me and this one not as bad. I think not sir
I'm good until 60 they say but have to check myself often but I'm glad it's done now again

Darkness · 18-01-2018, 12:43 AM

I'm glad it's just innuendo then.

Albie · 18-01-2018, 07:15 PM

Now have number plate illuminated but still no horn. Tried a replacement horn too and tailing to light bulb. It's either the Cagiva switch unit I fitted the Ducati connector block to or a cable break in loom. Not a problem either way as have 3 switchgear to use
That's this weekends job then

Darkness · 19-01-2018, 08:32 AM

Check the horn itself works too before spending too long on the switchgear and wiring!
You can then chase the fault from both ends to isolate the problem.

Albie · 21-01-2018, 01:15 PM

Was the horn No idea whether it worked before but was in reasonable condition. Did early bikes have vox bell ones or was that purely Ss models and were they silver and not black

Luddite · 21-01-2018, 02:53 PM

Quote:

Originally Posted by Albie

Was the horn No idea whether it worked before but was in reasonable condition. Did early bikes have vox bell ones or was that purely Ss models and were they silver and not black

Nearly there, Albie!

I'm feeling like I did when "Lost" was coming to an end; I want to see what happens in the end but I'll miss the unfolding saga.

Anyway, according to Stein Dinse, the original part no. was 800050555 but that's no longer available and the replacement is 400520280, which has a black centre...

But, if the pictures in the Ducati bible are to be believed, the original horn was all silver...

If you absolutely, positively must have the original, there's a NOS one on US ebay...
https://www.ebay.com/itm/352214482128

It's listed as being for a Cagiva 125, but I'm guessing the same part was used across the Cagiva group. It's certainly the same part number and it is completely silver.

At least your Monster finale will be very satisfying, which is something that I couldn't say for "Lost"!

Luddite · 21-01-2018, 03:39 PM

Here's the listing on ebay.co.uk...

https://www.ebay.co.uk/itm/NOS-OEM-C...item52019e7cd0

Albie · 21-01-2018, 04:53 PM

Thanks for that. I found another nos from Canada £22 posted inc part

Albie · 26-01-2018, 06:11 PM

Now I have working horn. It seems other one was duff but also the push needed some slight adjustment. 4 days off now so need to clear up last bits of checking and tightening bolts nuts banjos and exhausts but waiting on the rear brake bleeder pump.

Albie · 08-02-2018, 05:58 PM

Well the date is set for next week when Monster gets a trip in a van to be commissioned and MoT'd by Ducati Proteam. She goes this coming Monday so this time next week it could be good news or bad.

Everything is working now as far as I can see except a spongy front brake. I managed to sort the rear and just purchased my own vacuum bleed pump so over the weekend will attempt the fronts again.
Seat catch mechanism needs minor adjustment as not clicking in so may need a pair of washers under the plate and the oil feed tap doesn't feel positive shut so maybe the spring has lost some compression so will add a washer to that.
I also have to remove throttle as the plastic washer is not in there and when the new grips were fitted the throttle doesn't quick return as slight grabbing on throttle case side. The washer stops the grabbing and I missed it out.
Other than that its all done and really needs just an expert check oversee before starting her up once the oil is put in and some fuel in the tank.
Wish me luck and I hope next comment from me is pictures and video bearing good news.

Jez900ie · 08-02-2018, 07:09 PM

Quote:

Originally Posted by Albie

Well the date is set for next week when Monster gets a trip in a van to be commissioned and MoT'd by Ducati Proteam. She goes this coming Monday so this time next week it could be good news or bad.

Everything is working now as far as I can see except a spongy front brake. I managed to sort the rear and just purchased my own vacuum bleed pump so over the weekend will attempt the fronts again.
Seat catch mechanism needs minor adjustment as not clicking in so may need a pair of washers under the plate and the oil feed tap doesn't feel positive shut so maybe the spring has lost some compression so will add a washer to that.
I also have to remove throttle as the plastic washer is not in there and when the new grips were fitted the throttle doesn't quick return as slight grabbing on throttle case side. The washer stops the grabbing and I missed it out.
Other than that its all done and really needs just an expert check oversee before starting her up once the oil is put in and some fuel in the tank.
Wish me luck and I hope next comment from me is pictures and video bearing good news.

How exciting for you to be almost ready to hit the road on the project bike! I'm sure everything will be fine and look forward to a pic of you sitting on the bike grinning!

Luddite · 08-02-2018, 07:20 PM

This is exciting!

I'll wish you good luck but, with your meticulous approach, Albie, I'm sure luck won't be needed.

You should set up a live YouTube feed for the first start-up; it could be our version of Elon Musk's rocket launch!

Albie · 08-02-2018, 07:33 PM

It may well be filmed if lucky. I will be happy just knowing its alright. Never even ridden the bike. I have only heard it run.

Albie · 08-02-2018, 08:34 PM

Just sorted the rear wiring. Its now tucked out of sight in the square frame brace hole sandwiched between mudguard and tea tray. Bit of a bugger to do but worth the effort looking neat. Put thin washers between seat catch bracket and frame and seat now clicks into place.
Just that oil tap and brake bleed to do and throttle.

17-01-2018, 10:15 PM	#451
Darkness . Join Date: May 2007 Location: Stockbridge Bike: M900 Posts: 1,984	Bike fine, but how are you? When do you get the prognosis? __________________ Original and Best since 1993

18-01-2018, 12:43 AM	#453
Darkness . Join Date: May 2007 Location: Stockbridge Bike: M900 Posts: 1,984	I'm glad it's just innuendo then. __________________ Original and Best since 1993

18-01-2018, 07:15 PM	#454
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Now have number plate illuminated but still no horn. Tried a replacement horn too and tailing to light bulb. It's either the Cagiva switch unit I fitted the Ducati connector block to or a cable break in loom. Not a problem either way as have 3 switchgear to use That's this weekends job then __________________ http://albies93m900.blogspot.co.uk/

19-01-2018, 08:32 AM	#455
Darkness . Join Date: May 2007 Location: Stockbridge Bike: M900 Posts: 1,984	Check the horn itself works too before spending too long on the switchgear and wiring! You can then chase the fault from both ends to isolate the problem. __________________ Original and Best since 1993

21-01-2018, 01:15 PM	#456
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Was the horn No idea whether it worked before but was in reasonable condition. Did early bikes have vox bell ones or was that purely Ss models and were they silver and not black __________________ http://albies93m900.blogspot.co.uk/

21-01-2018, 03:39 PM	#458
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	Here's the listing on ebay.co.uk... https://www.ebay.co.uk/itm/NOS-OEM-C...item52019e7cd0

21-01-2018, 04:53 PM	#459
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Thanks for that. I found another nos from Canada £22 posted inc part __________________ http://albies93m900.blogspot.co.uk/

26-01-2018, 06:11 PM	#460
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Now I have working horn. It seems other one was duff but also the push needed some slight adjustment. 4 days off now so need to clear up last bits of checking and tightening bolts nuts banjos and exhausts but waiting on the rear brake bleeder pump. __________________ http://albies93m900.blogspot.co.uk/

08-02-2018, 05:58 PM	#461
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Time has come Well the date is set for next week when Monster gets a trip in a van to be commissioned and MoT'd by Ducati Proteam. She goes this coming Monday so this time next week it could be good news or bad. Everything is working now as far as I can see except a spongy front brake. I managed to sort the rear and just purchased my own vacuum bleed pump so over the weekend will attempt the fronts again. Seat catch mechanism needs minor adjustment as not clicking in so may need a pair of washers under the plate and the oil feed tap doesn't feel positive shut so maybe the spring has lost some compression so will add a washer to that. I also have to remove throttle as the plastic washer is not in there and when the new grips were fitted the throttle doesn't quick return as slight grabbing on throttle case side. The washer stops the grabbing and I missed it out. Other than that its all done and really needs just an expert check oversee before starting her up once the oil is put in and some fuel in the tank. Wish me luck and I hope next comment from me is pictures and video bearing good news. __________________ http://albies93m900.blogspot.co.uk/

08-02-2018, 07:20 PM	#463
Luddite Registered User Join Date: Aug 2011 Location: Southampton Bike: M1100evo Posts: 2,465	This is exciting! I'll wish you good luck but, with your meticulous approach, Albie, I'm sure luck won't be needed. You should set up a live YouTube feed for the first start-up; it could be our version of Elon Musk's rocket launch!

08-02-2018, 07:33 PM	#464
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	It may well be filmed if lucky. I will be happy just knowing its alright. Never even ridden the bike. I have only heard it run. __________________ http://albies93m900.blogspot.co.uk/

08-02-2018, 08:34 PM	#465
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Just sorted the rear wiring. Its now tucked out of sight in the square frame brace hole sandwiched between mudguard and tea tray. Bit of a bugger to do but worth the effort looking neat. Put thin washers between seat catch bracket and frame and seat now clicks into place. Just that oil tap and brake bleed to do and throttle. __________________ http://albies93m900.blogspot.co.uk/