My 796 story, so far .

[Doggy]

Originally Posted by Albie

You might not like it. I didn't and got rid. It's easier on the lumpy stuff but make sure you keep your chain adjusted more regular. It's now running closer to the swingarm.

Ahh, thanks for the tip . I think the chain will need a little tweak before I test it out . Never loosened the hub before and this was my first time, chain looks a little slack .

I'll dig the 15t one out of the bin just in case!

[Luddite]

I've been running a 14T front sprocket for 10,000 miles now and the gearing is perfect for me. Bear in mind I've got the 1100 though, which was definitely overgeared in stock trim, (you couldn't comfortably use sixth gear below an indicate 80). I don't know how it'll feel on the 796 so I'd be interested to hear how you get on.

As Albie said, the smaller front sprocket means that the chain runs closer to the swinging arm. I can see witness marks on my nylon swinging arm protector but, after 10k miles, there's still plenty of meat left on it and I think you'd only have to think about replacing it after around 25k. The swinging arm guard is easy to check, easy to replace and cheap to buy, so not really a problem.

While the better option, engineeringwise, would be a larger rear sprocket, that would also require a longer chain, so is a much more expensive option. If and when my chain needs replacing, I'll probably go down this route but, in the meantime, I'm happy with the 14T front.

If you've not adjusted the chain, two things to watch out for;

1. Don't overtighten the pinch bolts. If you overdo it, you can damage the eccentric adjuster. Torque them to 31Nm after applying some moly grease to the threads and under the heads. Tighten them in the sequence 1-2-1.
2. When you check the chain play, you're not measuring the up and down movement as you would with a conventional swinging arm, instead you measure the distance from the underside of the swinging arm to the centre of one of the chain pins. It should be 62mm +/- 1mm at a point equidistant between the two sprockets with the bike on the sidestand.



Note that, while the suggested amount of play seems very loose compared with a conventional swinging arm, when you're sat on the bike, the chain tightens considerably so don't be tempted to over tighten it while it's on the stand. Get someone to sit on it and feel the difference between loaded and unloaded.

[Doggy]

Thanks for the info as always . I tightened the bolts up to 38nm . I'll go and loosen them off this afternoon and double check the chain with the mrs sitting on the bike .
ps
Got a large parcel turning up in the next few days! . Sshhh....

[Luddite]

Originally Posted by Doggy

Got a large parcel turning up in the next few days! . Sshhh....

Oooh! Exciting! Looking forward to the next thread.

Wonder what it could be? Another body kit perhaps?

[Darren69]

Pnk body kit?

[Darren69]

Originally Posted by Darren69

Pnk body kit?

Pink body kit? The only colour he doesn't have already!

[Doggy]

[Luddite]

Originally Posted by Darren69

Pink body kit? The only colour he doesn't have already!

No pink ones, Darren! The closest would be this fetching lilac offering, but I can't see Doggy going for that



My top three would be:

Mach 1


Mike Hailwood


Corse

[Darren69]

The pink ones are rare but they did sell at least one: -

https://motorcycles-for-sale.biz/sale.php?id=19184

[Darren69]

Lilac/pink might be the same but I do see a difference?

[Doggy]

It might be a body kit. Or it might not .

[Doggy]

Three great options there though .

[Pezz]

The rear sets look great - glad they have gone to a good home and are being used - Geoff would be made up too

I had a set of the Mike Hailwood panels but sold them on wit my 696 when that went last year - they look great. Geoff used the design as a template for his 1100s when he had a custom paint job done on his tank panels

Here is a link - sorry its on Facey B

https://www.facebook.com/ducatimanch...type=3&theater

[Mr Gazza]

There he is with Bike of the Year 2018..

Pezz do you get to have Bike of the Year and Half?

..... the way things are going Pezz may have "bike of the 2 year"....do we have a trophy for that ?