Almost 5 years - Page 2

Albie · 05-06-2014, 08:38 PM

Well that's a relief as the service is done and full MOT with a full service from Al @ Proteam Ducati. Picking her up on Saturday.

Never seen her as naked as this and still pure monster underneath in my opinion.

Cant wait for the new look oh and them Rizoma grips too.

Happy Birthday bike

Black Bob · 05-06-2014, 08:44 PM

Very very very nice.

Like the tail tidy too.

Albie · 05-06-2014, 08:51 PM

Quote:

Originally Posted by Black Bob

Very very very nice.

Like the tail tidy too.

You still not done it. What you like

Dirty · 05-06-2014, 08:58 PM

Pure monster on top as well. Just my opinion of course too

Not enough carbon though

Albie · 05-06-2014, 09:05 PM

I may get the rear frame carbon dipped over winter. Cheaper than £700 for the real thing. Needs a decent low zorsts too.

Darren69 · 07-06-2014, 12:00 PM

These guys do a brushed aluminium dipping film.

http://www.dipthis.co.uk/shop/category/film/metal/

crust · 07-06-2014, 02:51 PM

If you want them chromed, have a word with these people

http://www.invictavac.com/index.html

Local-ish to you.

Albie · 23-06-2014, 05:59 PM

Wow within a weekend of dropping panels in we are moving on to lacquer choice. After receiving my spare centres I took them along to the dippers only to find its an ex boyfriend of my eldest daughters. They both are still mates so no problem there other than I get a good deal. So talking to Paul we decide what I want and I never had to tell him about directional laying ie the brush lines to the front which gave me confidence. He has just finished carbon fibre coating on a Ferrari in interior trim and under bonnet and valances so his work is good. I told him no rush whenever at your speed and today he must have got the sample transfer because he mailed me the tester mould and now I have to decide on Lacquer.
I like the gloss but it looks false if you get me.
I like the matt too because it looks just like it should.
We could spray wet and get a satin finish.

He is doing the centres first to make sure I like and they should also look good in between the carbon and red panels too.
The only issue we have is that Brushed Aluminium only comes in 0.5m width and the seat cowel is 0.54 m wide edge to edge. We may be ok but if not it will have a split line which will be hard to see and if not a centre tricolor stripe.

This is Gloss lacquer

This is Matt laquer

If you can imagine it something like this you are not far away. It will have a vivid red air intake and an aluminium screen too. I may get a front mudguard done if it looks wrong with the carbon but will need rear too or lose that completely. I wont give up the original plastics in case I sell but this should keep me content and hopefully people will like it for themselves.

Dirty · 23-06-2014, 06:12 PM

Matt or satin

Where are you getting it dipped?

Albie · 23-06-2014, 06:24 PM

Probs Matt. If I don't like we can add more lacquer not take away..

He here nr Yalding Maidstone in Kent

https://www.facebook.com/kentcustomdipping

alan c · 23-06-2014, 06:32 PM

I think Matt Albie or Satin, but not gloss as too shiny ( but don't tell scrapps )

Albie · 23-06-2014, 07:12 PM

Quote:

Originally Posted by alan c

I think Matt Albie or Satin, but not gloss as too shiny ( but don't tell scrapps )

Yeah that's what were going for Al. I wont tell him No. I will ring him up as I need some decals made. I bought some Norton styli ones but a bit big and not keen. I am now think standard issue look in Matt black the DUCATI with the monster in Gloss red. The air intake is red with Gold carbon fibre he reckons will look good but that's to be discussed due to the colour of other carbon fibre I have.

I feel very happy now. Now I need some nice fasteners but not coloured other than black or silver. I saw some titanium ones £30 yeah right.

Albie · 08-07-2014, 06:04 PM

A glimpse of a centre panel sent to me today and fairing. Not sure how glossy to do it as yet but he is also spraying the Italian flag on seat cowl in a blowing flag.
Front tank infill

Fairing

Rear centre

08-07-2014, 06:22 PM

It looks amazing Albie, can't wait to see it finished!

Black Bob · 08-07-2014, 06:37 PM

Reminds me of Mac OSX 10.4 - the best looking of all Mac OS's, in my opinion.

05-06-2014, 08:38 PM	#16
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Birthday service done Well that's a relief as the service is done and full MOT with a full service from Al @ Proteam Ducati. Picking her up on Saturday. Never seen her as naked as this and still pure monster underneath in my opinion. Cant wait for the new look oh and them Rizoma grips too. Happy Birthday bike __________________ http://albies93m900.blogspot.co.uk/

05-06-2014, 08:44 PM	#17
Black Bob Registered User Join Date: Mar 2009 Location: Exeter Bike: M1100evo Posts: 580	Very very very nice. Like the tail tidy too. __________________ "I'm not Black, I'm not Bob and I'm not in Exeter.... no, wait, erm..."

05-06-2014, 08:58 PM	#19
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	Pure monster on top as well. Just my opinion of course too Not enough carbon though __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

05-06-2014, 09:05 PM	#20
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	I may get the rear frame carbon dipped over winter. Cheaper than £700 for the real thing. Needs a decent low zorsts too. __________________ http://albies93m900.blogspot.co.uk/

07-06-2014, 12:00 PM	#21
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,091	These guys do a brushed aluminium dipping film. http://www.dipthis.co.uk/shop/category/film/metal/ __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

07-06-2014, 02:51 PM	#22
crust rattles when he walks Join Date: Aug 2002 Location: in the comfy chair,moved furniture around Bike: M900 Posts: 1,065	If you want them chromed, have a word with these people http://www.invictavac.com/index.html Local-ish to you.

23-06-2014, 05:59 PM	#23
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	So we are off Wow within a weekend of dropping panels in we are moving on to lacquer choice. After receiving my spare centres I took them along to the dippers only to find its an ex boyfriend of my eldest daughters. They both are still mates so no problem there other than I get a good deal. So talking to Paul we decide what I want and I never had to tell him about directional laying ie the brush lines to the front which gave me confidence. He has just finished carbon fibre coating on a Ferrari in interior trim and under bonnet and valances so his work is good. I told him no rush whenever at your speed and today he must have got the sample transfer because he mailed me the tester mould and now I have to decide on Lacquer. I like the gloss but it looks false if you get me. I like the matt too because it looks just like it should. We could spray wet and get a satin finish. He is doing the centres first to make sure I like and they should also look good in between the carbon and red panels too. The only issue we have is that Brushed Aluminium only comes in 0.5m width and the seat cowel is 0.54 m wide edge to edge. We may be ok but if not it will have a split line which will be hard to see and if not a centre tricolor stripe. This is Gloss lacquer This is Matt laquer If you can imagine it something like this you are not far away. It will have a vivid red air intake and an aluminium screen too. I may get a front mudguard done if it looks wrong with the carbon but will need rear too or lose that completely. I wont give up the original plastics in case I sell but this should keep me content and hopefully people will like it for themselves. __________________ http://albies93m900.blogspot.co.uk/ Last edited by Albie; 23-06-2014 at 06:09 PM..

23-06-2014, 06:12 PM	#24
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	Matt or satin Where are you getting it dipped? __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

23-06-2014, 06:24 PM	#25
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	Probs Matt. If I don't like we can add more lacquer not take away.. He here nr Yalding Maidstone in Kent https://www.facebook.com/kentcustomdipping __________________ http://albies93m900.blogspot.co.uk/

23-06-2014, 06:32 PM	#26
alan c alan (blockhead) c Join Date: Oct 2005 Location: dartford Bike: M1100 Posts: 2,228	I think Matt Albie or Satin, but not gloss as too shiny ( but don't tell scrapps )

08-07-2014, 06:04 PM	#28
Albie Fanactical volunteer Join Date: Oct 2003 Location: Kent Bike: M900 Posts: 9,034	A glimpse of a centre panel sent to me today and fairing. Not sure how glossy to do it as yet but he is also spraying the Italian flag on seat cowl in a blowing flag. Front tank infill Fairing Rear centre __________________ http://albies93m900.blogspot.co.uk/

08-07-2014, 06:22 PM	#29
Akita Boy Guest Posts: n/a	It looks amazing Albie, can't wait to see it finished!

08-07-2014, 06:37 PM	#30
Black Bob Registered User Join Date: Mar 2009 Location: Exeter Bike: M1100evo Posts: 580	Reminds me of Mac OSX 10.4 - the best looking of all Mac OS's, in my opinion. __________________ "I'm not Black, I'm not Bob and I'm not in Exeter.... no, wait, erm..."