Dukedesmo's M900 project - the intro...

[Saint aka ML]

Well I would fit it for pure looks!!

[Dukedesmo]

Originally Posted by Saint aka ML

Well I would fit it for pure looks!!

[Saint aka ML]

For longer forks I overcome it with bar risers but with angle change so my bars are up and back towards the tank.

It had an unexpected effect that I like of me sitting on a monster with feel more like supermotard then sports bike. Sweet as encourages supermoto style riding and improves visibility.

[Dukedesmo]

So, the basic layout of the bike established I need to look into the tank, 'bodywork' & colour.

Initially I was thinking red but then had a change of plan when I found a nice metallic silver tank, plus I already have a red Ducati. Either way the frame & wheels were always going to be black.

I then later found a new black Metallic tank and was smitten with it, black and sparkly and I like the dark, stealth, even mean look - Wife said it looks like a 'Devil bike'...

Metallica;



'Sparklies';



The tank is for a later model 'Monster Metallica' which are 900ie models so although it fits fine it has provision for internal electric fuel pump/filter etc so will require a little thinking to get it right for a carby bike.

I have an electric pump assembly and will run a 'loop' to the carbs with a return to the tank to ensure that they don't get over-pressurised (I understand FCR's tend to leak/overflow if the pressure is too high), hopefully this will work OK? if still too much then I will need to fit/devise some kind of pressure regulator or reducer.



Anyway I'm glad to get rid of the external, mechanical fuel pump, tap & filter to reduce clutter and give me more cool air flow to the rear cylinder to help keep the temperature down.

Moving onto 'bodywork', not a faired bike but as you all know there are several plastic parts here & there and I'm a bit of a Carbon-fibre fan which, combined with the black bike look you can see where this is going; Carbon-fibre mudguard, hugger, side panels, seat cowl, belt covers, air 'deflectors', exhaust heat shields, number plate tray thingy and I've got a carbon fibre flyscreen that I will test for wind reduction and, assuming it helps in that area I will probably fit, unless it really spoils the look - again the jury is out on that one for now.





To be continued...

Looks like a nice project bike in the making like I'd do if I didn't needed to waste, sorry spend it else where.

Maximum respect to your project! I'm very excited about the resut. Nice to read and see your pictures. No.1

I think that the black theme will really suit the bike, but the screen will ruin it in my humble opinion

[Dukedesmo]

Originally Posted by Nottsbiker

I think that the black theme will really suit the bike, but the screen will ruin it in my humble opinion

Yes, I might agree with you on that. I'm torn between looks and practicality as some wind protection would be be nice.

I need to see and try the finished article both with and without...

If out were me I'd keep the fairing the shed and only fit it when I went on long trips like events and holidays etc.

Monsters are all about style after all

Originally Posted by Nottsbiker

If out were me I'd keep the fairing the shed and only fit it when I went on long trips like events and holidays etc.

Monsters are all about style after all

Agreed! Fairing does nothing for a monsters looks.

Z.

I'm watching this with interest mate

Wish I could justify this kind of expenditure on my project, but have to spend big ££'s on a new kitchen / getting our house renovated first - after that I'll be straight on the phone to Mr Ohlins and co.

OK I'm on nights and maybe I've missed it somewhere but dieing to know how this turned out.

[Dukedesmo]

Originally Posted by mholc123

OK I'm on nights and maybe I've missed it somewhere but dieing to know how this turned out.

Hope you weren't holding your breath?

Despite getting my flowed heads back some months ago, things did stall due to a couple of building projects - one of which was a workshop refurb which is now all done, so now I have no excuse.

The idea of getting it done for this year has now gone but I'm now aiming for a an over-winter project to be on the road in the spring.

To this end I actually made a new start yesterday with a minor alteration to the frame due to the float chamber of the vertical cylinder carb touching one of the cross-braces, which I know from experience (with a KTM) can only end badly when the bottom of the carb splits and fuel pours over the engine.

A few pics,

Cross brace moved slightly further forward;





Still deciding whether to move the battery support cross member back by a few mm as the horizontal intake stack is very close and I'd be happier with more clearance plus it would be easier to fit an air filter;



At least now I have a better working space, previously was cold, dark, damp & dusty.



More updates (hopefully) soon.

[Dukedesmo]

Originally Posted by Dukedesmo

Still deciding whether to move the battery support cross member back by a few mm as the horizontal intake stack is very close and I'd be happier with more clearance plus it would be easier to fit an air filter;

And there it was gone;



Got to be careful with new location as moving the battery back requires moving it up to clear the rocker cover, there's room under the tank but may need to angle the battery forwards slightly to be comfortable.

I just gotta hand it to ya Dukedesmo, this is going to be one absolutely gorgeous piece of mobile artwork. Come to think of it, it already is.