Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 641 | Total Threads: 50,834 | Total Posts: 518,614 Currently Active Users: 576 (0 active members) Please welcome our newest member, DarnCyclists |
|
|
Thread Tools | Rating: | Display Modes |
|
21-11-2015, 05:49 PM | #1 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
No rush mate. Extra tools hmm not sure but looks unused like the other bits. No marks at all on the tools.
__________________
http://albies93m900.blogspot.co.uk/ |
23-11-2015, 02:25 PM | #2 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
A couple of days off from work so rather than doing nothing I set to work making rather than buying a a seat clip for the new or spare seat copying the original. You never know if one will show up on ebay as generally come with seats which I don't want or are the second type with the pin fixing. This is once again a basic fabrication measure, cut , bend and get welded and plated.
Pin was a 6" nail with galvanising wired off and some 1.5mm plate scrap. I made it with threads so it could be welded like that correct and then nuts and bolts removed when tacked and finished off after. Now I just need my mate Big Oz to do the welding stuff for me.
__________________
http://albies93m900.blogspot.co.uk/ |
23-11-2015, 06:16 PM | #3 |
Registered User
Join Date: Aug 2007
Location: Derry
Bike: M900
Posts: 358
|
You're a canny man albie looks good.
__________________
1994 M900 Black |
26-11-2015, 08:49 PM | #4 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
I remade the vertical plate as I wasn't satisfied with the width being a 1mm narrow and that hole where the rod goes through was to clearance. Also tighter crisp creases too now.
The clear heat shrink came in the post so covered the end connectors and tidied up the sheathing. Engine is as good as I am prepared to remove paint etc and now just needs going over with a scourer in a warm and clean atmosphere. Spare tank I drilled out the broken fuel cap ring keep bolt but the thread was knackered and rusty so now tapped 1mm over size to M6. I just will clear the hole in the ring now to 6.1mm. Received my closer rocker in the post from Tim and put that in the heads parts box to be reassembled soon.
__________________
http://albies93m900.blogspot.co.uk/ |
29-11-2015, 12:08 PM | #5 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
A better pair of front forks colour wise bought on Ebay for £60. Mine although good condition wise are more faded will be up for sale.
__________________
http://albies93m900.blogspot.co.uk/ |
02-12-2015, 08:14 PM | #6 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
Got my forks today delivered and very pleased with them overall. The colour is definitely better
Condition of the feet is on par with the other except the I of DUCATI is damaged on the right leg (sitting on ) but original has a scrape on the bottom. I can swap out the better bits as I think one leg has an oil seal gone so will be changing them as a matter of course with fresh oil. This could be the way of getting the springs done better. Also got the NOS 1993 owners manual still sealed in a cagiva wrap.
__________________
http://albies93m900.blogspot.co.uk/ |
29-12-2015, 05:25 PM | #7 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
Its been a while since posting updates basically because I have been doing nothing to the bike. Came to a halt and a decision not to fast forward just because of a desire to finish for the UKMOC Weekender. I don't think it will be there sadly because I do so much to get engine up and finished and that costs money I need for my wedding. Yes we are getting married finally that's me and Caroline not me and the bike.
The good news is though that today I picked up the heads, barrels , intake tubes and valve cover plates from TSR vapour blasting. They look really nice now back to original material and is a shame they need overpainting.
__________________
http://albies93m900.blogspot.co.uk/ |
29-12-2015, 06:12 PM | #8 |
.
Join Date: May 2007
Location: Stockbridge
Bike: M900
Posts: 1,984
|
Very clean engine parts: Did you find a paint match for the rocker covers Albie?
__________________
Original and Best since 1993 |
29-12-2015, 06:34 PM | #9 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
No but will be looking tomorrow for sure to get paint on them soon as. If the engine had been available stripped before crank done I would have done that too . Carbs are too fiddly to strip for me.
__________________
http://albies93m900.blogspot.co.uk/ |
29-12-2015, 09:07 PM | #10 |
Registered User
Join Date: Aug 2007
Location: Derry
Bike: M900
Posts: 358
|
They look fantastic.
__________________
1994 M900 Black |
13-03-2016, 07:58 PM | #11 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
I really want to say how grateful I am of not only this forum but of the kind offer from our president slob. He delivered to Brands Hatch as promised this complete front fairing for me to clean up and use or paint for a sum of money to charity.
I wasn't expecting a wonderful condition piece as initially I wanted only the brackets to copy and desired an original screen as I made a new but clear one. This is what I got After going home I was most keen to get it clean to see whats what. It had marks and some scratches and some paint missing on edges but I was pleased 100%. An hour later after dismantling it and getting stickers and residue off and a good T cut and polish it looks like this. All I need to do is find the front decal I got made and now cannot find from Image Works. I can now sell my really nice yellow one with a clear screen but without brackets unless I can get some made. So just a BIG THANK YOU
__________________
http://albies93m900.blogspot.co.uk/ |
14-03-2016, 05:11 PM | #12 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
Trial fitted the front fairing tonight with longer bolts but no spacers. I need to get slob to turn some up for me as he offered his lathe services so why not do so. I think aluminium would be best to try and shed some weight put on now by the screen and heavy brackets. Might be better to copy the brackets in alloy at some point too.
Have to say it looks just great with it and without so I am glad of the option. I did find that missing decal last night after another search. Now that jobs ticked without paint expenditure I can relax and get married and come back to finishing properly in 4 weeks time with a positive outlook.
__________________
http://albies93m900.blogspot.co.uk/ |
14-03-2016, 08:25 PM | #13 |
Registered User
Join Date: Jan 2014
Location: Newbury
Bike: Multiple Monsters
Posts: 366
|
I am fascinated by what is in the box marked "bill acceptor" ..... Is it part of getting married??
|
14-03-2016, 08:43 PM | #14 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
Ah bill acceptor is a note reader for vending machines. Part of my job as a service engineer. Sometimes empty boxes come in handy for ebay and stowing stuff I get. Garage is in a utter mess right now due to xmas and me not being in there for more than minutes and not tidying up. Have a chore to do tomorrow night of making some space and a good sort out. Part of my getting married is being able to continue to restore if I want as long as she can continue on her path of teaching involving many hours of marking and planning and as long as I cook dinner.
__________________
http://albies93m900.blogspot.co.uk/ |
14-03-2016, 08:48 PM | #15 |
Registered User
Join Date: Jan 2014
Location: Newbury
Bike: Multiple Monsters
Posts: 366
|
BTW.. Good Luck and best wishes for the wedding...
|
|
|