Searching for a bracket to fit a high mounted exhaust

[Foggy]

Originally Posted by spuggy

Yeh, take a look at this auction for an S4 DP high-level kit:

Ducati Monster M900 M400 S4 Termignoni Full Exhaust Muffler

Note the complete set of shouldered bolts & spacers?

IIRC, S4 kits were offered in 3 flavours:

Hey Spuggy, looking at the second photo where it shows the complete set of shouldered bolts, I assume the longer bolts are for the lower left hand side of the bracket. So do you reckon I just need two more of these for the lower right hand side ? Or will I also need longer bolts for the upper right hand side too to bring the bracket fully out evenly ? It's just that I was expecting the upper left hand side to have longer bolts too but it seems not from the photo.

[spuggy]

Originally Posted by Foggy

Hey Spuggy, looking at the second photo where it shows the complete set of shouldered bolts, I assume the longer bolts are for the lower left hand side of the bracket. So do you reckon I just need two more of these for the lower right hand side ? Or will I also need longer bolts for the upper right hand side too to bring the bracket fully out evenly ? It's just that I was expecting the upper left hand side to have longer bolts too but it seems not from the photo.

Eh?
The photo shows 8 bolts and 8 spacers, no? The 4 shorter bolts are for the top mounts of the hanger, and the 4 longer ones are for the bottom. I forget what the two small spacers are for - seat lock, perhaps?

I'm confused why I don't seem to have that 8 bolts/spacers on the M900, but maybe I screwed up fitting it...

[Foggy]

Originally Posted by spuggy

Eh?
The photo shows 8 bolts and 8 spacers, no? The 4 shorter bolts are for the top mounts of the hanger, and the 4 longer ones are for the bottom. I forget what the two small spacers are for - seat lock, perhaps?

I'm confused why I don't seem to have that 8 bolts/spacers on the M900, but maybe I screwed up fitting it...

I could only see 2 long bolts but it could be an optical illusion from the photo. If you are saying there are 4 long bolts then that makes sense for the lower bolts on both sides. I was wondering though whether I needed longer bolts for the upper 2 bolts on each side to bring the complete bracket out evenly.