Searching for a bracket to fit a high mounted exhaust

Foggy · 25-05-2024, 01:24 PM

Does anybody know where I can buy a bracket (or two) for a high mounted exhaust can on a Monster 600 ? I assume the bracket would fit onto the trellis frame and suspend the hanging strap from it in order to support the exhaust. Cheers.

Martin C · 26-05-2024, 12:38 PM

Are you sure you can route the exhaust pipes so that they don’t fry your legs or backside?

Dukedesmo · 26-05-2024, 04:24 PM

The OEM brackets are aluminium plate, bent to suit and bolt under the undertray, through the lock mechanism.

There are 2 of them, 1 left, 1 right IIRC you could fit just the one if you only have 1 can?

Not sure if still available from Ducati though? Wouldn't be too difficult to make something if not.

You can see the left side on this pic of mine, M600 will be the same as M900

.

Dukedesmo · 26-05-2024, 04:29 PM

To add, a search found a complete hi-level system on USA ebay. Not what you're looking for but you can see the brackets in the pictures.

https://www.ebay.ca/itm/166755826580...gAAOSwyUtmPm19

Darren69 · 27-05-2024, 07:16 AM

Those are the Termignoni ones the other type I have seen are like in picture 5

https://www.ebay.co.uk/itm/314387104...mis&media=COPY

Foggy · 27-05-2024, 10:38 AM

Thanks for all the information on the types of brackets guys, that's really helpful. Now I know what to look for just need to find somebody who sells them. Thanks again.

Wrider · 27-05-2024, 12:00 PM

I used p clips and universal straight bracket lol

Foggy · 27-05-2024, 12:21 PM

Quote:

Originally Posted by Wrider

I used p clips and universal straight bracket lol

Yes I did consider something similar where the bracket attaches to the trellis frame ... I wasn't sure if it would hold the can securely enough. Guess it's ok if you have managed to do it. Sounds like an easier solution to get the bits. Thanks.

Mr Gazza · 27-05-2024, 01:42 PM

My 900 had high level Remus pipes and silencers when I first bought it, but I soon hoiked them off and sold them. I can't remember even riding it with those as they were too loud and made it look like a wheelbarrow.

They were held on with P-clips as I recall and attached to the grab handles rather than the seat rail I think?
Be aware that the hugger uses up pretty much all the space available under the seat undertray when on full bounce, so try and avoid bracketry that goes under the tray if you can.
Also there is not enough room behind the footrest hangars for the pipes if they are to miss the hugger and swinging arm, so spacers are needed between frame/engine and the hangers.
They will be about 25mm diameter with 10mm holes for the engine and 8mm for the frame.
Thickness will be in the region of 10mm depending on how much room you need to gain.

Foggy · 27-05-2024, 08:34 PM

Thanks Gary, lots of useful and important points to consider there. The spacers in particular so I'll investigate that when I start .... I'm planning this as a winter project after the MOT but I'll definitely try and avoid the wheelbarrow appearance !

Zimbo · 29-05-2024, 05:53 PM

The couple of monsters I have had with high mounted exhausts had pretty simple top mounts, essentially an aluminium strap, shaped to go over the top of the frame rails, and the cans hung from that. One set was silmoter, the other mivvi. As Gary has said, spacers needed to get clearance.

Darren69 · 30-05-2024, 12:58 PM

The spare set of Termignoni ones I had were sold back in 2017.

I think Spuggy had them but I don't see it on the thread.

http://www.ukmonster.co.uk/monster/s...ad.php?t=55435

I don't even know if he is still around or has them. AFAIK they were only sold with the exhaust kits.

I have seen some on google that mount to the rear pillion pegs and use the clamp upside down but I don't know if that was a homemade solution.

Foggy · 30-05-2024, 08:19 PM

Quote:

Originally Posted by Zimbo

The couple of monsters I have had with high mounted exhausts had pretty simple top mounts, essentially an aluminium strap, shaped to go over the top of the frame rails, and the cans hung from that. One set was silmoter, the other mivvi. As Gary has said, spacers needed to get clearance.

Thanks that makes sense. Yes the spacers you and Gary mention seem to be essential in the fitting. I assume it is for the 2 bolts on the footpeg hanger and the 2 bolts on the engine/brake pedal support ? Doe this mean I need to get longer bolts to accommodate the spacers ?

Foggy · 30-05-2024, 08:22 PM

Quote:

Originally Posted by Darren69

The spare set of Termignoni ones I had were sold back in 2017.

I think Spuggy had them but I don't see it on the thread.

http://www.ukmonster.co.uk/monster/s...ad.php?t=55435

I don't even know if he is still around or has them. AFAIK they were only sold with the exhaust kits.

I have seen some on google that mount to the rear pillion pegs and use the clamp upside down but I don't know if that was a homemade solution.

OK thanks. Sounds like it could be a homemade solution, might not be secure enough.

walkingpictures · 31-05-2024, 12:38 PM

Spuggy was last active on here on 19 May 2024 so is still around!!

25-05-2024, 01:24 PM	#1
Foggy Registered User Join Date: May 2024 Location: Diss Bike: M600 Posts: 32	Searching for a bracket to fit a high mounted exhaust Does anybody know where I can buy a bracket (or two) for a high mounted exhaust can on a Monster 600 ? I assume the bracket would fit onto the trellis frame and suspend the hanging strap from it in order to support the exhaust. Cheers.

26-05-2024, 12:38 PM	#2
Martin C Bronze Member Join Date: Jun 2006 Location: Burton on Trent Bike: M900 Posts: 250	Are you sure you can route the exhaust pipes so that they don’t fry your legs or backside? __________________ Owning a Monsta is not the beginning of the end, but it may well be the end of the beginning....

26-05-2024, 04:24 PM	#3
Dukedesmo Registered User Join Date: Sep 2010 Location: Leics Bike: M900 Posts: 2,901	The OEM brackets are aluminium plate, bent to suit and bolt under the undertray, through the lock mechanism. There are 2 of them, 1 left, 1 right IIRC you could fit just the one if you only have 1 can? Not sure if still available from Ducati though? Wouldn't be too difficult to make something if not. You can see the left side on this pic of mine, M600 will be the same as M900 . __________________ M900, 916, LeMans II.

26-05-2024, 04:29 PM	#4
Dukedesmo Registered User Join Date: Sep 2010 Location: Leics Bike: M900 Posts: 2,901	To add, a search found a complete hi-level system on USA ebay. Not what you're looking for but you can see the brackets in the pictures. https://www.ebay.ca/itm/166755826580...gAAOSwyUtmPm19 __________________ M900, 916, LeMans II.

27-05-2024, 07:16 AM	#5
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Those are the Termignoni ones the other type I have seen are like in picture 5 https://www.ebay.co.uk/itm/314387104...mis&media=COPY __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

27-05-2024, 10:38 AM	#6
Foggy Registered User Join Date: May 2024 Location: Diss Bike: M600 Posts: 32	Thanks for all the information on the types of brackets guys, that's really helpful. Now I know what to look for just need to find somebody who sells them. Thanks again.

27-05-2024, 12:00 PM	#7
Wrider Member Join Date: Sep 2011 Location: Telford Bike: S4r Posts: 175	I used p clips and universal straight bracket lol

27-05-2024, 01:42 PM	#9
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,983	My 900 had high level Remus pipes and silencers when I first bought it, but I soon hoiked them off and sold them. I can't remember even riding it with those as they were too loud and made it look like a wheelbarrow. They were held on with P-clips as I recall and attached to the grab handles rather than the seat rail I think? Be aware that the hugger uses up pretty much all the space available under the seat undertray when on full bounce, so try and avoid bracketry that goes under the tray if you can. Also there is not enough room behind the footrest hangars for the pipes if they are to miss the hugger and swinging arm, so spacers are needed between frame/engine and the hangers. They will be about 25mm diameter with 10mm holes for the engine and 8mm for the frame. Thickness will be in the region of 10mm depending on how much room you need to gain. __________________

27-05-2024, 08:34 PM	#10
Foggy Registered User Join Date: May 2024 Location: Diss Bike: M600 Posts: 32	Thanks Gary, lots of useful and important points to consider there. The spacers in particular so I'll investigate that when I start .... I'm planning this as a winter project after the MOT but I'll definitely try and avoid the wheelbarrow appearance !

29-05-2024, 05:53 PM	#11
Zimbo Too much time on my hands member Join Date: Apr 2003 Location: Stonehouse, Glos Bike: Multiple Monsters Posts: 2,085	The couple of monsters I have had with high mounted exhausts had pretty simple top mounts, essentially an aluminium strap, shaped to go over the top of the frame rails, and the cans hung from that. One set was silmoter, the other mivvi. As Gary has said, spacers needed to get clearance.

30-05-2024, 12:58 PM	#12
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	The spare set of Termignoni ones I had were sold back in 2017. I think Spuggy had them but I don't see it on the thread. http://www.ukmonster.co.uk/monster/s...ad.php?t=55435 I don't even know if he is still around or has them. AFAIK they were only sold with the exhaust kits. I have seen some on google that mount to the rear pillion pegs and use the clamp upside down but I don't know if that was a homemade solution. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

31-05-2024, 12:38 PM	#15
walkingpictures preneolithic frebie Join Date: Sep 2002 Location: Cambridge Bike: S4Rs Posts: 329	Spuggy was last active on here on 19 May 2024 so is still around!!