Airbox clip retaining pin

Wasta · 07-04-2024, 02:19 PM

Has anyone got one of these spare? I have the spring clip but not the pin. I could cut up a bit of steel wire but the original pin would be much better.
Part number 742231045

Thanks.

Mr Gazza · 07-04-2024, 02:37 PM

If I lost one or more, I'd be looking to buy a couple of bits of this in appropriate diameter.
https://www.ebay.co.uk/itm/385230120...AaAvesEALw_wcB
I'm guessing they are 3mm without looking. I might swap them anyway, but come to think of it ali would be up to the job and be even lighter?

Mr Gazza · 07-04-2024, 02:41 PM

Ali rod. Cheaper and lighter.
https://www.ebay.co.uk/itm/134173631...4aAh3MEALw_wcB

Mr Gazza · 07-04-2024, 04:51 PM

Since my tank is off it made my airbox easily accessible, so.
I've got 3 roll pins and 1 bit of brass rod @ 1/8" x 1 1/4" which drops out with the greatest of ease. This must be the non-standard one?
The roll pins measure 4.3mm at their fattest as they are not truly round, and 30mm long.
No idea if these are original fitment or not, but they fit well and do the job.

They weigh 2g each btw so good luck trying to save any weight!

Edit; Just had a look in my assorted pins tin and found 4 stainless roll pins that fit a treat but are not brown like the originals.

Wasta · 07-04-2024, 08:11 PM

Would you like to sell them Gazza?

m600jim · 08-04-2024, 06:24 AM

I needed one last year and had to buy a pack of 10 from Ducati so you can have one of the spares, let me know address etc

m600jim · 08-04-2024, 06:25 AM

Quote:

Originally Posted by m600jim

I needed one last year and had to buy a pack of 10 from Ducati so you can have one of the spares, let me know address etc

Part number 86250071A

900Rebuilder · 08-04-2024, 07:12 AM

I've probably got some as I'm running the mwr filter which screws to the sides of the lower half.

Let me know if you want me to look?

Dukedesmo · 08-04-2024, 12:56 PM

https://www.ebay.co.uk/itm/123747873485

Looks like it's 4 x 30 roll pin so should be available for not much from any engineering supplier.

Mr Gazza · 08-04-2024, 01:17 PM

Quote:

Originally Posted by Dukedesmo

https://www.ebay.co.uk/itm/123747873485

Looks like it's 4 x 30 roll pin so should be available for not much from any engineering supplier.

Yep that looks like all they are.. Plain and simple.

I put my stainless ones in the bike and I'm sure you don't want the rusty originals?
Push the boat out and get some stainless ones.

Darren69 · 08-04-2024, 05:28 PM

I've just put these on ebay if any good for you?
https://www.ebay.co.uk/itm/145712877...mis&media=COPY

Wasta · 08-04-2024, 05:29 PM

Thanks guys, m600jim is sending me the part.

Wasta · 12-04-2024, 04:53 AM

Big thanks to James for the pin, it arrived safely and very well packaged.

07-04-2024, 02:19 PM	#1
Wasta Registered User Join Date: Mar 2012 Location: Durham Bike: M900 Posts: 386	Airbox clip retaining pin Has anyone got one of these spare? I have the spring clip but not the pin. I could cut up a bit of steel wire but the original pin would be much better. Part number 742231045 Thanks. __________________ 2018 Aprilia Tuono V4 1100RR 1998 M900 monster

07-04-2024, 02:37 PM	#2
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,859	If I lost one or more, I'd be looking to buy a couple of bits of this in appropriate diameter. https://www.ebay.co.uk/itm/385230120...AaAvesEALw_wcB I'm guessing they are 3mm without looking. I might swap them anyway, but come to think of it ali would be up to the job and be even lighter? __________________ Last edited by Mr Gazza; 07-04-2024 at 04:52 PM..

07-04-2024, 02:41 PM	#3
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,859	Ali rod. Cheaper and lighter. https://www.ebay.co.uk/itm/134173631...4aAh3MEALw_wcB __________________

07-04-2024, 04:51 PM	#4
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,859	Since my tank is off it made my airbox easily accessible, so. I've got 3 roll pins and 1 bit of brass rod @ 1/8" x 1 1/4" which drops out with the greatest of ease. This must be the non-standard one? The roll pins measure 4.3mm at their fattest as they are not truly round, and 30mm long. No idea if these are original fitment or not, but they fit well and do the job. They weigh 2g each btw so good luck trying to save any weight! Edit; Just had a look in my assorted pins tin and found 4 stainless roll pins that fit a treat but are not brown like the originals. __________________ Last edited by Mr Gazza; 07-04-2024 at 05:22 PM..

07-04-2024, 08:11 PM	#5
Wasta Registered User Join Date: Mar 2012 Location: Durham Bike: M900 Posts: 386	Would you like to sell them Gazza? __________________ 2018 Aprilia Tuono V4 1100RR 1998 M900 monster

08-04-2024, 06:24 AM	#6
m600jim Registered User Join Date: Oct 2021 Location: Bristol Bike: M600 Posts: 28	I needed one last year and had to buy a pack of 10 from Ducati so you can have one of the spares, let me know address etc

08-04-2024, 07:12 AM	#8
900Rebuilder Registered User Join Date: Sep 2022 Location: Beeston Bike: M900 Posts: 306	I've probably got some as I'm running the mwr filter which screws to the sides of the lower half. Let me know if you want me to look? __________________ Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW

08-04-2024, 12:56 PM	#9
Dukedesmo Registered User Join Date: Sep 2010 Location: Leics Bike: M900 Posts: 2,854	https://www.ebay.co.uk/itm/123747873485 Looks like it's 4 x 30 roll pin so should be available for not much from any engineering supplier. __________________ M900, 916, LeMans II.

08-04-2024, 05:28 PM	#11
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,043	I've just put these on ebay if any good for you? https://www.ebay.co.uk/itm/145712877...mis&media=COPY __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

08-04-2024, 05:29 PM	#12
Wasta Registered User Join Date: Mar 2012 Location: Durham Bike: M900 Posts: 386	Thanks guys, m600jim is sending me the part. __________________ 2018 Aprilia Tuono V4 1100RR 1998 M900 monster

12-04-2024, 04:53 AM	#13
Wasta Registered User Join Date: Mar 2012 Location: Durham Bike: M900 Posts: 386	Big thanks to James for the pin, it arrived safely and very well packaged. __________________ 2018 Aprilia Tuono V4 1100RR 1998 M900 monster