900 relay holder

900Rebuilder · 05-01-2024, 09:55 AM

Hi All,

Does anyone have the relay holders that mount next to the fuse box?

I tried to buy new ones from Ducati but they are NLA so am after good condition used.

I incorrectly assumed that they were both the same but the parts diagram at Nottingham Ducati lists 2 different numbers which is confusing for me as I have one but dont know which it is.

They are made of rubber but Ducati calls them brackets

They are only £2 ish each new so was happy to buy both but cant

Do you have them for sale?

Cheers - Ben

Darren69 · 06-01-2024, 04:09 AM

Are they similar to S4 ones? You might be able to make these work. They are £1.95 from Ducati

https://www.ebay.co.uk/itm/234305703...mis&media=COPY

900Rebuilder · 08-01-2024, 08:05 AM

Quote:

Originally Posted by Darren69

Are they similar to S4 ones? You might be able to make these work. They are £1.95 from Ducati

https://www.ebay.co.uk/itm/234305703...mis&media=COPY

Thanks I'd assume they are the same but as I dont have one I cant be 100% certain.

I bought some relays off ebay to replace mine with new as they were listed for the 900 but when they arrived they were much smaller so assume for a later bike. Only reason I mention it as the one in the link could also be smaller

Darren69 · 08-01-2024, 09:19 AM

They could be from a 900 injection bike. I'll measure one of mine and post it.

900Rebuilder · 08-01-2024, 01:33 PM

Quote:

Originally Posted by Darren69

They could be from a 900 injection bike. I'll measure one of mine and post it.

Many thanks

Darren69 · 09-01-2024, 10:10 AM

Hi Ben, the relay that fits that rubber sleeve on my s4r is 15x23mm and 26mm high.

900Rebuilder · 09-01-2024, 01:16 PM

Quote:

Originally Posted by Darren69

Hi Ben, the relay that fits that rubber sleeve on my s4r is 15x23mm and 26mm high.

Thanks - I'll have a look tonight up in the freezer

900Rebuilder · 11-01-2024, 08:07 AM

Thats most likely the same as I've been able to deduce that I appear to have the larger holder and require the smaller one. I wonder if the parts have been superseded by different numbers as Ducati say they are both NLA which is a shame

slob · 11-01-2024, 11:21 AM

Does anyone here have an old/larger one that could be copied?
I’d happily try printing one in TPU.

900Rebuilder · 11-01-2024, 12:48 PM

Many thanks

But after much cross referencing at Ducati Nottingham today we have found one from another model (916 iirc) that fits the small relay on the 900.

Was also hoping that I could get the NLA Monster fuel tap but unfortunately is a no go for every similar Ducati model

Darren69 · 11-01-2024, 12:56 PM

The part number of the one I have on my bikes The one I refer to is part 82911901A. Looks like it's available and about £2. The only similar other one I've seen is from a Vespa but much dearer.

Mr Gazza · 11-01-2024, 01:16 PM

This is exactly the sort of part that we should have a 3D model of in our library.
If anyone has or can lend an original for a week or so, I can get a 3D cad file produced and then pass it on to my nephew who is learning all about how to operate his brand new 3D printer, and he's a fast learner from what I've seen so far.

I'm sure there is a rubber like plastic that can be 3D printed?

900Rebuilder · 11-01-2024, 02:22 PM

Quote:

Originally Posted by Darren69

The part number of the one I have on my bikes The one I refer to is part 82911901A. Looks like it's available and about £2. The only similar other one I've seen is from a Vespa but much dearer.

Spotted those on ebay but the bottom part looks smaller looking at the pictures although in real life I'm not certain

900Rebuilder · 11-01-2024, 02:24 PM

Quote:

Originally Posted by Mr Gazza

This is exactly the sort of part that we should have a 3D model of in our library.
If anyone has or can lend an original for a week or so, I can get a 3D cad file produced and then pass it on to my nephew who is learning all about how to operate his brand new 3D printer, and he's a fast learner from what I've seen so far.

I'm sure there is a rubber like plastic that can be 3D printed?

No idea tbh but some key parts are NLA I've noticed and parts chap told me that bikes made pre-2000 are now beginning to see many more bits becoming like this so alternatives would be grand.

Regarding normal 3D printing I'd imagine there is a massive market for those front indicator to top yoke mounts

Mr Gazza · 11-01-2024, 04:28 PM

Quote:

Originally Posted by 900Rebuilder

Regarding normal 3D printing I'd imagine there is a massive market for those front indicator to top yoke mounts

Easy! if anyone could lend me a good one?

05-01-2024, 09:55 AM	#1
900Rebuilder Registered User Join Date: Sep 2022 Location: Beeston Bike: M900 Posts: 330	900 relay holder Hi All, Does anyone have the relay holders that mount next to the fuse box? I tried to buy new ones from Ducati but they are NLA so am after good condition used. I incorrectly assumed that they were both the same but the parts diagram at Nottingham Ducati lists 2 different numbers which is confusing for me as I have one but dont know which it is. They are made of rubber but Ducati calls them brackets They are only £2 ish each new so was happy to buy both but cant Do you have them for sale? Cheers - Ben __________________ Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW

06-01-2024, 04:09 AM	#2
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Are they similar to S4 ones? You might be able to make these work. They are £1.95 from Ducati https://www.ebay.co.uk/itm/234305703...mis&media=COPY __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

08-01-2024, 09:19 AM	#4
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	They could be from a 900 injection bike. I'll measure one of mine and post it. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

09-01-2024, 10:10 AM	#6
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	Hi Ben, the relay that fits that rubber sleeve on my s4r is 15x23mm and 26mm high. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

11-01-2024, 08:07 AM	#8
900Rebuilder Registered User Join Date: Sep 2022 Location: Beeston Bike: M900 Posts: 330	Thats most likely the same as I've been able to deduce that I appear to have the larger holder and require the smaller one. I wonder if the parts have been superseded by different numbers as Ducati say they are both NLA which is a shame __________________ Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW

11-01-2024, 11:21 AM	#9
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,737	Does anyone here have an old/larger one that could be copied? I’d happily try printing one in TPU.

11-01-2024, 12:48 PM	#10
900Rebuilder Registered User Join Date: Sep 2022 Location: Beeston Bike: M900 Posts: 330	Many thanks But after much cross referencing at Ducati Nottingham today we have found one from another model (916 iirc) that fits the small relay on the 900. Was also hoping that I could get the NLA Monster fuel tap but unfortunately is a no go for every similar Ducati model __________________ Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW

11-01-2024, 12:56 PM	#11
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	The part number of the one I have on my bikes The one I refer to is part 82911901A. Looks like it's available and about £2. The only similar other one I've seen is from a Vespa but much dearer. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

11-01-2024, 01:16 PM	#12
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,984	This is exactly the sort of part that we should have a 3D model of in our library. If anyone has or can lend an original for a week or so, I can get a 3D cad file produced and then pass it on to my nephew who is learning all about how to operate his brand new 3D printer, and he's a fast learner from what I've seen so far. I'm sure there is a rubber like plastic that can be 3D printed? __________________