Misfire - Page 3

Dukedesmo · 10-01-2023, 02:47 PM

Certainly brazing was used back in the day.

40 odd years ago I had a 1960s Ducati 250 Scrambler that developed a minor leak on the seam at the rear, the local bike mechanic brazed it for a decent repair.

Certainly a more modern weld would work fine but it would need more preparation, (paint removal) will likely put more heat into the area and therefore burn off even more paint/risk warping?

motomartin11 · 10-01-2023, 06:37 PM

This is helpful

http://www.ukmonster.co.uk/monster/s...ight=tank+leak

Thanks

utopia · 10-01-2023, 06:59 PM

Yes, I think that's the thread I had in mind.

While on the subject, I would recommend never using the std tank prop.
It only works on one side of the tank and therefore imparts a twisting load on the hinge area. In my opinion this is the likely cause of the leakage which often occurs.
My tank prop has been hanging, unused on the shed wall for well over a decade.
Instead I use a length of timber to prop the tank up from the airbox.
Something like 20mm x 80mm and about 450mm long is about right.
Its also a much more secure way of supporting the tank when its raised.
Furthermore, the little plastic end on the std tank prop breaks very easily.

motomartin11 · 10-01-2023, 08:43 PM

Quote:

Originally Posted by utopia

Yes, I think that's the thread I had in mind.

While on the subject, I would recommend never using the std tank prop.
It only works on one side of the tank and therefore imparts a twisting load on the hinge area. In my opinion this is the likely cause of the leakage which often occurs.
My tank prop has been hanging, unused on the shed wall for well over a decade.
Instead I use a length of timber to prop the tank up from the airbox.
Something like 20mm x 80mm and about 450mm long is about right.
Its also a much more secure way of supporting the tank when its raised.
Furthermore, the little plastic end on the std tank prop breaks very easily.

Yes I have a suitable sized length of timber which I now use instead of the factory prop. It also doubles up when I want to ensure the "bonnet" on my mid engined sports car is securely open when I charge the battery over the winter as the hydraulic struts which are supposed to keep it open are on the way out.

motomartin11 · 17-01-2023, 08:39 AM

Further update if anyone is still awake : tank has now been "gas" welded at a cost of £80. I currently have no other details nor do I know the extent of the damage to the existing paintwork -await collection via my fiend who is doing the work. Meanwhile bike is back with me -all it should need to put back on the road now is refinishing /repair / re-painting of the tank and swapping over the fuel lines / filter/ mountings and the cap etc. The OE tank cap is looking its age-like the owner-does anyone know if the replacements offered on Ebay are any good please?

https://www.ebay.co.uk/itm/334585475...3ABFBMqpSz8bdh

jerry · 17-01-2023, 01:12 PM

I have used £18 Ebay fuel caps on 3 Ducatis and they worked fine

motomartin11 · 17-01-2023, 02:47 PM

Quote:

Originally Posted by jerry

I have used £18 Ebay fuel caps on 3 Ducatis and they worked fine

Thanks Jerry.

350TSS · 18-01-2023, 10:21 AM

Agree with Jerry, used one on a Ducati and one specified for a ZX9R both fine in terms of initial install and durability in use. You will have two keys on your key ring though unless you go to the trouble of dismantling your original lock and swapping it with the lock out of the new purchase - risky (?).

jerry · 18-01-2023, 02:03 PM

I would stick with 2 keys the locks have tiny spring that are fiddly and easy to lose and hard to control or fit

motomartin11 · 18-01-2023, 06:03 PM

Thanks.

I had anticipated the duplicate keys issue.

As I have part of the ignition lock missing maybe this is the answer?

https://www.ebay.co.uk/itm/403939615...3ABFBMsPfm47hh
I know there will still be the seat lock but I don't lift that often.
I've had some pics of the welded tank (can't post due to tech incompetence) but it looks OK. Just waiting for my mate to let me know what he's going to do about re-painting the areas around the welds but it doesn't look too badly affected.
Looks as though I shall be able to get the bike back on the road for Spring now fingers crossed.
I'm told after the work on the engine and clutch it runs quietly and very well now.

900Rebuilder · 19-01-2023, 06:45 AM

Quote:

Originally Posted by motomartin11

Thanks.

I had anticipated the duplicate keys issue.

As I have part of the ignition lock missing maybe this is the answer?

https://www.ebay.co.uk/itm/403939615...3ABFBMsPfm47hh
I know there will still be the seat lock but I don't lift that often.
I've had some pics of the welded tank (can't post due to tech incompetence) but it looks OK. Just waiting for my mate to let me know what he's going to do about re-painting the areas around the welds but it doesn't look too badly affected.
Looks as though I shall be able to get the bike back on the road for Spring now fingers crossed.
I'm told after the work on the engine and clutch it runs quietly and very well now.

Use Post Images - if I can do it anyone can

motomartin11 · 31-05-2023, 06:42 PM

Update if anyone is interested..........?
Tank paint , lacquer and decals have been bought and the paint has been fully removed from the old tank.
Hoping the re-spray will be done over the next week or 2 after which the plan is to re-fit the hardware and get the old nail fired up and MOT'd as the old one is about to expire.
Also hoping after all the engine and electrical work it will be a nicer (and more reliable) bike to ride.

900Rebuilder · 02-06-2023, 09:47 AM

Fingers crossed for you it works out

motomartin11 · 02-06-2023, 11:39 AM

Quote:

Originally Posted by 900Rebuilder

Fingers crossed for you it works out

Thanks-it's been a long haul.

Will post up what transpires.

utopia · 02-06-2023, 01:52 PM

Yes, we are interested.
And likewise, I hope you finally get it all sorted out after the long haul.

10-01-2023, 02:47 PM	#31
Dukedesmo Registered User Join Date: Sep 2010 Location: Leics Bike: M900 Posts: 2,854	Certainly brazing was used back in the day. 40 odd years ago I had a 1960s Ducati 250 Scrambler that developed a minor leak on the seam at the rear, the local bike mechanic brazed it for a decent repair. Certainly a more modern weld would work fine but it would need more preparation, (paint removal) will likely put more heat into the area and therefore burn off even more paint/risk warping? __________________ M900, 916, LeMans II.

17-01-2023, 01:12 PM	#36
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,837	I have used £18 Ebay fuel caps on 3 Ducatis and they worked fine __________________ MONSTERMAN

18-01-2023, 02:03 PM	#39
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,837	I would stick with 2 keys the locks have tiny spring that are fiddly and easy to lose and hard to control or fit __________________ MONSTERMAN

02-06-2023, 09:47 AM	#43
900Rebuilder Registered User Join Date: Sep 2022 Location: Beeston Bike: M900 Posts: 306	Fingers crossed for you it works out __________________ Ducati Monster 900 - Yamaha tdr125 & dt200wr - Ford GPW

10-01-2023, 06:37 PM	#32
motomartin11 Registered User Join Date: Sep 2010 Location: stourbridge Bike: M750 Posts: 353	This is helpful http://www.ukmonster.co.uk/monster/s...ight=tank+leak Thanks

10-01-2023, 06:59 PM	#33
utopia No turn left unstoned Join Date: Jun 2010 Location: leicester Bike: M750 Posts: 4,546	Yes, I think that's the thread I had in mind. While on the subject, I would recommend never using the std tank prop. It only works on one side of the tank and therefore imparts a twisting load on the hinge area. In my opinion this is the likely cause of the leakage which often occurs. My tank prop has been hanging, unused on the shed wall for well over a decade. Instead I use a length of timber to prop the tank up from the airbox. Something like 20mm x 80mm and about 450mm long is about right. Its also a much more secure way of supporting the tank when its raised. Furthermore, the little plastic end on the std tank prop breaks very easily.

17-01-2023, 08:39 AM	#35
motomartin11 Registered User Join Date: Sep 2010 Location: stourbridge Bike: M750 Posts: 353	Further update if anyone is still awake : tank has now been "gas" welded at a cost of £80. I currently have no other details nor do I know the extent of the damage to the existing paintwork -await collection via my fiend who is doing the work. Meanwhile bike is back with me -all it should need to put back on the road now is refinishing /repair / re-painting of the tank and swapping over the fuel lines / filter/ mountings and the cap etc. The OE tank cap is looking its age-like the owner-does anyone know if the replacements offered on Ebay are any good please? https://www.ebay.co.uk/itm/334585475...3ABFBMqpSz8bdh

18-01-2023, 10:21 AM	#38
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,421	Agree with Jerry, used one on a Ducati and one specified for a ZX9R both fine in terms of initial install and durability in use. You will have two keys on your key ring though unless you go to the trouble of dismantling your original lock and swapping it with the lock out of the new purchase - risky (?).

18-01-2023, 06:03 PM	#40
motomartin11 Registered User Join Date: Sep 2010 Location: stourbridge Bike: M750 Posts: 353	Thanks. I had anticipated the duplicate keys issue. As I have part of the ignition lock missing maybe this is the answer? https://www.ebay.co.uk/itm/403939615...3ABFBMsPfm47hh I know there will still be the seat lock but I don't lift that often. I've had some pics of the welded tank (can't post due to tech incompetence) but it looks OK. Just waiting for my mate to let me know what he's going to do about re-painting the areas around the welds but it doesn't look too badly affected. Looks as though I shall be able to get the bike back on the road for Spring now fingers crossed. I'm told after the work on the engine and clutch it runs quietly and very well now.

31-05-2023, 06:42 PM	#42
motomartin11 Registered User Join Date: Sep 2010 Location: stourbridge Bike: M750 Posts: 353	Update if anyone is interested..........? Tank paint , lacquer and decals have been bought and the paint has been fully removed from the old tank. Hoping the re-spray will be done over the next week or 2 after which the plan is to re-fit the hardware and get the old nail fired up and MOT'd as the old one is about to expire. Also hoping after all the engine and electrical work it will be a nicer (and more reliable) bike to ride.

02-06-2023, 01:52 PM	#45
utopia No turn left unstoned Join Date: Jun 2010 Location: leicester Bike: M750 Posts: 4,546	Yes, we are interested. And likewise, I hope you finally get it all sorted out after the long haul.