Free stuff

Nasher · 08-08-2022, 05:16 PM

This is a final batch of stuff from Mark's(Darkness) garage.

It's all pretty worthless in the grand scheme of things, but could be useful to somebody.
Anything still here in 2 weeks will go in the bin.

It's all Free of charge except for the postage, or you can collect from Clanfield Hants.
And it may take me a few days to post them.
Postage and Packing for each item will be £5.

Bagsies on the thread first please.

Oh, and excuse my poor photography on these.

Early Monster shock with good action.

Complete rear brake set up, not tested in any way TAKEN

Couple of rear drive flanges TAKEN

Std Clutch Pressure plate and WORN Aluminium basket TAKEN

Non Nellie fuel filler cap and key TAKEN

Nasher · 08-08-2022, 05:20 PM

Complete Hydraulic clutch set up - not tested

Clutch master cylinder - not tested TAKEN

Selection of levers - cosmetically rough but good spares TAKEN

Sought after 15mm Brake master cylinder, but with tabs for pivot pin roughly removed.

Nasher · 08-08-2022, 05:23 PM

Tank pivot in good condition with pin TAKEN

Cosmetically rough Gear lever and linkage TAKEN

13mm Brake master cylinder, the body of which is in good condition TAKEN

Nasher · 08-08-2022, 05:26 PM

2 x Starter Solenoids plus bracket TAKEN

Fuel filter rubber TAKEN

Footrests, both LHS(I think), and both a bit corroded TAKEN

Flip · 08-08-2022, 05:26 PM

Hi Nasher, I would love the filler cap and key please.

Nasher · 08-08-2022, 05:29 PM

And lastly a complete Wiring loom for an early Monster.

I've had a quick look over it and there is some corrosion on some terminals but it doesn't appear to have been butchered.
It's an early 2 Yellow Charging wire spec.
It comes with a Reg/Rec attached which has not been tested, plus a Fusebox and relay assembly.
There is corrosion to the charging cable connectors.

Nasher · 08-08-2022, 05:30 PM

Quote:

Originally Posted by Flip

Hi Nasher, I would love the filler cap and key please.

Acknowledged.
Will PM later when I get home.

motomartin11 · 08-08-2022, 06:40 PM

Could bagsie the footrests,fuel filter rubber, a solenoid, 13mm brake master and gear lever and linkage if nobody else wants them please?

motomartin11 · 08-08-2022, 06:41 PM

oh and the clutch mater as well...

Yorkie · 08-08-2022, 07:47 PM

If the pressure plate and basket are still available I would be interested in them.

Yorkie

Saint aka ML · 08-08-2022, 08:12 PM

Is tank pivot compatible with s2r 1000?

Nasher · 08-08-2022, 09:08 PM

Motomartin11, Yorkie, noted, I'll PM you later.

Saint, I'm sorry I really don't know.

Stuart42 · 09-08-2022, 08:38 AM

Hi Nasher
Could I have the following please?
Rear brake set up
Sprocket carriers
Levers
Tank hinge
I know gear lever and linkage has gone but would like the linkage if only the lever is needed ?
I’m building a Desmo Due race bike which needs one
Cheers
Stuart

PS
I’m in Andover if this saves postage, as know Darkness was in Stockbridge

Nasher · 09-08-2022, 09:00 AM

Quote:

Originally Posted by Stuart42

Hi Nasher
Could I have the following please?
Rear brake set up
Sprocket carriers
Levers
Tank hinge
I know gear lever and linkage has gone but would like the linkage if only the lever is needed ?
I’m building a Desmo Due race bike which needs one
Cheers
Stuart

PS
I’m in Andover if this saves postage, as know Darkness was in Stockbridge

Have sent you a PM.

Quote:

Originally Posted by Stuart42

I know gear lever and linkage has gone but would like the linkage if only the lever is needed ?

I'll leave you to negotiate with Motomartin11 and he can confirm to me what he needs.

jerry · 09-08-2022, 03:33 PM

Im interested in loom and anything left over footrests , levers , rear brake and carrier can come and collect

08-08-2022, 05:16 PM	#1
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,518	Free stuff This is a final batch of stuff from Mark's(Darkness) garage. It's all pretty worthless in the grand scheme of things, but could be useful to somebody. Anything still here in 2 weeks will go in the bin. It's all Free of charge except for the postage, or you can collect from Clanfield Hants. And it may take me a few days to post them. Postage and Packing for each item will be £5. Bagsies on the thread first please. Oh, and excuse my poor photography on these. Early Monster shock with good action. Complete rear brake set up, not tested in any way TAKEN Couple of rear drive flanges TAKEN Std Clutch Pressure plate and WORN Aluminium basket TAKEN Non Nellie fuel filler cap and key TAKEN __________________ Heaven doesn't want me, and Hell is afraid I'll take over. Last edited by Nasher; 09-08-2022 at 08:55 AM..

08-08-2022, 05:20 PM	#2
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,518	Complete Hydraulic clutch set up - not tested Clutch master cylinder - not tested TAKEN Selection of levers - cosmetically rough but good spares TAKEN Sought after 15mm Brake master cylinder, but with tabs for pivot pin roughly removed. __________________ Heaven doesn't want me, and Hell is afraid I'll take over. Last edited by Nasher; 09-08-2022 at 08:56 AM..

08-08-2022, 05:23 PM	#3
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,518	Tank pivot in good condition with pin TAKEN Cosmetically rough Gear lever and linkage TAKEN 13mm Brake master cylinder, the body of which is in good condition TAKEN __________________ Heaven doesn't want me, and Hell is afraid I'll take over. Last edited by Nasher; 09-08-2022 at 08:56 AM..

08-08-2022, 05:26 PM	#4
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,518	2 x Starter Solenoids plus bracket TAKEN Fuel filter rubber TAKEN Footrests, both LHS(I think), and both a bit corroded TAKEN __________________ Heaven doesn't want me, and Hell is afraid I'll take over. Last edited by Nasher; 08-08-2022 at 10:40 PM..

08-08-2022, 05:26 PM	#5
Flip Registered User Join Date: Mar 2010 Location: Beachtown Bike: M900 Posts: 2,188	Hi Nasher, I would love the filler cap and key please. __________________ You're perfect, yes, it's true- But without me you're only you!

08-08-2022, 05:29 PM	#6
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,518	And lastly a complete Wiring loom for an early Monster. I've had a quick look over it and there is some corrosion on some terminals but it doesn't appear to have been butchered. It's an early 2 Yellow Charging wire spec. It comes with a Reg/Rec attached which has not been tested, plus a Fusebox and relay assembly. There is corrosion to the charging cable connectors. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

08-08-2022, 06:40 PM	#8
motomartin11 Registered User Join Date: Sep 2010 Location: stourbridge Bike: M750 Posts: 371	Could bagsie the footrests,fuel filter rubber, a solenoid, 13mm brake master and gear lever and linkage if nobody else wants them please?

08-08-2022, 06:41 PM	#9
motomartin11 Registered User Join Date: Sep 2010 Location: stourbridge Bike: M750 Posts: 371	oh and the clutch mater as well...

08-08-2022, 07:47 PM	#10
Yorkie Anglo-Saxon Warrior Join Date: Aug 2002 Location: North Yorkshire Bike: M900 Posts: 2,485	If the pressure plate and basket are still available I would be interested in them. Yorkie __________________ NO ICE, GUN IT!

08-08-2022, 08:12 PM	#11
Saint aka ML Junior ah to be young Join Date: Nov 2007 Location: London Bike: Multiple Monsters Posts: 2,058	Is tank pivot compatible with s2r 1000? __________________ "I am Lucazade"

08-08-2022, 09:08 PM	#12
Nasher Registered User Join Date: Jul 2014 Location: Portsmouth Bike: M900 Posts: 1,518	Motomartin11, Yorkie, noted, I'll PM you later. Saint, I'm sorry I really don't know. __________________ Heaven doesn't want me, and Hell is afraid I'll take over.

09-08-2022, 08:38 AM	#13
Stuart42 Gold Member Join Date: Apr 2006 Location: Andover Bike: M750 Posts: 925	Hi Nasher Could I have the following please? Rear brake set up Sprocket carriers Levers Tank hinge I know gear lever and linkage has gone but would like the linkage if only the lever is needed ? I’m building a Desmo Due race bike which needs one Cheers Stuart PS I’m in Andover if this saves postage, as know Darkness was in Stockbridge

09-08-2022, 03:33 PM	#15
jerry Old Git Join Date: May 2006 Location: Cricklade Bike: Multiple Monsters Posts: 2,897	Im interested in loom and anything left over footrests , levers , rear brake and carrier can come and collect __________________ MONSTERMAN