Remove fork tube from lower casting M600

Darren69 · 28-10-2021, 07:45 PM

Yea the Showa's aren't great but better than the Marzocchi. I guess you need to weigh up the cost of modded Marzo vs Showa. The spindle size and caliper bolt spacing will probably be different to what you have on the later ones, it's doable but again you need to weigh up the cost of new calipers, axle and wheel bearings. If the 600 is a keeper then maybe a worthwhile mod or if you plan to upgrade to a bigger Monster then just cut your losses and get a 900/1000/S4 and get alll the good stuff included.

28-10-2021, 07:45 PM	#8
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,041	Yea the Showa's aren't great but better than the Marzocchi. I guess you need to weigh up the cost of modded Marzo vs Showa. The spindle size and caliper bolt spacing will probably be different to what you have on the later ones, it's doable but again you need to weigh up the cost of new calipers, axle and wheel bearings. If the 600 is a keeper then maybe a worthwhile mod or if you plan to upgrade to a bigger Monster then just cut your losses and get a 900/1000/S4 and get alll the good stuff included. __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage