New brake and clutch lines - Page 2

slob · 30-01-2021, 01:39 PM

I always like the Goodridge ones, we had a big ‘fishing tackle’ box of fittings and a reels of hose/sleeve in the first shop I worked in, so making lines was a skill I learned a long time ago. You could always adjust the fit with a little tweak of the collars.
Swaged fittings that rotate without leaking at operating pressure sounds like black magic to me, very clever! Thanks for the recommendation.

Dukedesmo · 30-01-2021, 04:59 PM

I like the Goodridge build-a-line with the screw-on banjos; https://www.goodridge.co.uk/collections/buildaline-kits

You can get any angle and use any fitting (straight, angled etc.) and hose can be any length for a perfect fit.

I don't think they're too bulky in fact, I quite like the 'technical' look of them - got them on all my bikes.

350TSS · 31-01-2021, 09:42 AM

The Goodridge ones I bought as 3 bits - 2 x SS banjos ( you can get all types with a range of different standard angles in 2 planes) and a hose cut to a set length (variable in c10mm increments) pre fitted with the captive SS rotating olive nuts so fitting was simplicity itself. Because the hose is free to rotate and the banjos at either end are free to rotate until the olive nuts/banjo unions are tightened you can get the route of the line completely set without stressing the pipework at all before you tighten everything up. I will definitely buy Goodridge again when I do my 750SS.

The Venhill brake hose system on the other hand is a complete nightmare as this comes as a kit of parts and getting the PTFE liner to fit over the banjo hose spout was virtually impossible and even when you managed that the olive nut would not move over the expanded section where the hose went over the increased diameter on the banjo hose spout. Not recommended at all.

pooh · 31-01-2021, 12:59 PM

I have used HEL lines on my bikes for years I get them from B&C Express at Potterhanworth near Lincoln speak to Terry he knows Ducati’s inside out, ex spares guy at Italia Lincoln.

Pooh

30-01-2021, 04:59 PM	#17
Dukedesmo Registered User Join Date: Sep 2010 Location: Leics Bike: M900 Posts: 2,894	I like the Goodridge build-a-line with the screw-on banjos; https://www.goodridge.co.uk/collections/buildaline-kits You can get any angle and use any fitting (straight, angled etc.) and hose can be any length for a perfect fit. I don't think they're too bulky in fact, I quite like the 'technical' look of them - got them on all my bikes. __________________ M900, 916, LeMans II.

31-01-2021, 12:59 PM	#19
pooh Lincolnshire Area Rep Join Date: Oct 2002 Location: Grimsby Bike: M900ie Posts: 470	I have used HEL lines on my bikes for years I get them from B&C Express at Potterhanworth near Lincoln speak to Terry he knows Ducati’s inside out, ex spares guy at Italia Lincoln. Pooh __________________ Slighty less brain cells than I was born with

30-01-2021, 01:39 PM	#16
slob . Join Date: Jul 2003 Location: East London Bike: Multiple Monsters Posts: 9,735	I always like the Goodridge ones, we had a big ‘fishing tackle’ box of fittings and a reels of hose/sleeve in the first shop I worked in, so making lines was a skill I learned a long time ago. You could always adjust the fit with a little tweak of the collars. Swaged fittings that rotate without leaking at operating pressure sounds like black magic to me, very clever! Thanks for the recommendation.

31-01-2021, 09:42 AM	#18
350TSS Too much time on my hands member Join Date: Jan 2013 Location: Shipbourne Bike: M900 Posts: 1,422	The Goodridge ones I bought as 3 bits - 2 x SS banjos ( you can get all types with a range of different standard angles in 2 planes) and a hose cut to a set length (variable in c10mm increments) pre fitted with the captive SS rotating olive nuts so fitting was simplicity itself. Because the hose is free to rotate and the banjos at either end are free to rotate until the olive nuts/banjo unions are tightened you can get the route of the line completely set without stressing the pipework at all before you tighten everything up. I will definitely buy Goodridge again when I do my 750SS. The Venhill brake hose system on the other hand is a complete nightmare as this comes as a kit of parts and getting the PTFE liner to fit over the banjo hose spout was virtually impossible and even when you managed that the olive nut would not move over the expanded section where the hose went over the increased diameter on the banjo hose spout. Not recommended at all.