![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 634 | Total Threads: 50,814 | Total Posts: 518,426 Currently Active Users: 7,679 (0 active members) Please welcome our newest member, simifeltham |
![]() |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#46 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
Waiting for the engine spares at the moment, so filled some time doing some bead blasting on bits and pieces… one of the best bits of kit I have is a blast cabinet… It used to live outside at the back of the garage because I could never seal it from escaping media as obviously the air tries to inflate the cabinet… with machines about abrasive dust is a no no… Then I hit on the idea of a centrifugal type filter, which offers no resistance to the air going through it. I made the filter out of an Ikea plastic box and some sink drain pipe, it vents outside…. the principle is as the air is made to twist and turn, the partials of dust and media centrifuge out and drop to the bottom of the chambers… so the first chamber gets the most, the second less and so on. there is hardly anything on the drive and nothing in the workshop. its difficult to get this level of restoration to a part without it… Bead also gives that nice sheen to alloy parts and they don’t pick up dirty finger prints. its very good at resisting oxidation as well, particularly with a coat of ACF-50… here is the fuel tap.
I used to make a BIG mistake with bead blasting… I could never get a really nice finish except with brand new media… I moaned at the supplier once and he asked me what pressure I blasted at… high as I can I told him.. there is your problem then! you are shattering the glass beads and turning them into sharp dust, hence you get a dull surface! So I went home, filled my cabinet with new bead and got my wife to turn up the pressure as I cleaned a part… soon as it went shiny, that was the best pressure! ![]() here is the difference old bead high pressure, new bead low pressure! ![]() here is a before and after on some weber carbs I rebuilt... ![]() ![]() here is how the filter works ![]() |
![]() |
![]() |
![]() |
#47 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
50 years ago I was an apprentice to the best mechanic I have ever known…Gerry Lampit. He is 89 now and I still visit him… he is still sharp as a razor … He taught me that the hammer was the last resort… that’s always stayed with me. So when I needed to change the swinging arm bearings his words rang in my head
![]() Parts have arrived from Moto Rapido. What a pleasure it is to deal with Craig and Luke, they are SO helpful and knowledgeable! after years of suffering the ignorant local dealer, these guys are the best! ![]() The engine rebuild has started… the cases are together, crank and gearbox shafts shimmed, and I spent a couple of hours making a flywheel holding tool. it worked rather well. Don’t ask me why the hell I welded the bar right across it, had to cut it to get the socket on! senior moment! ![]() ![]() |
![]() |
![]() |
![]() |
#48 |
Registered User
Join Date: Sep 2020
Location: Nairn
Bike: S4r
Posts: 99
|
Great to see this quality of work. Respect.
|
![]() |
![]() |
![]() |
#49 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
the rebuild of the heads is going well… some of the clearances are out though, not surprising as I gave the valves a bit of a grind in and replaced the half rings. I have a little spreadsheet that I put the values in, which calculates everything from there, and also mirrors the measurements in MM rather than the thous I prefer to work in. Old school I know!
Been doing the plating on and off, its time consuming, but I put parts in the bucket, set the timer so I don’t forget, and the magic happens… just a few parts to go… frame and wheels are back from the powder coater, and its another superb job…. ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#50 |
Registered User
Join Date: Sep 2020
Location: Stirling
Bike: M1000ie
Posts: 120
|
Looking quality!
|
![]() |
![]() |
![]() |
#51 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,826
|
Your word about gettin swingarm and bearings out is music ,i do for a living offshore and usually I find the puller like yours works easy peasy on most bikes and machines but on my S4 it did not , tried heat, drifts ,bigger hammers , and ended up using 11 tons of hydraulic press pressure to get the little boogers out ,, I put them in 10 years ago on the S4 will lots of clean grease and lube ,,,,ho hum
__________________
MONSTERMAN |
![]() |
![]() |
![]() |
#52 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
one of the things that has been niggling me is the engine oil pipes and oil cooler lines are badly corroded on the ends… replacements, even aftermarket are a fortune… So I decided to try and plate them… they actually came out rather well!
![]() ![]() |
![]() |
![]() |
![]() |
#53 |
Fanactical volunteer
Join Date: Oct 2003
Location: Kent
Bike: M900
Posts: 9,033
|
I said in my build thread you can do this. My friend did his xt500 ones and they are cloth covered braid as to why I had a go. The only thing you will find is the stainless is too gold and it doesnt adhere perfect . I never liked the gold so a light going over the braid with a green nylon scourer bought it back to normal.
Last edited by Albie; 08-12-2020 at 09:46 AM.. |
![]() |
![]() |
![]() |
#54 |
Too much time on my hands member
Join Date: Jan 2013
Location: Shipbourne
Bike: M900
Posts: 1,420
|
Buzzer: are you using a pump to agitate the mixture, the clear polypipe? and if so are you feeding in air or recirculating the mixture.
My attempts at home brewed plating (just zinc coating with no passivate) whilst always managing to get full coverage always seemed to end up with a grey furry texture which required to be lightly polished with a scotchbrite pad but even then a dullish light grey uneven coloured finish. |
![]() |
![]() |
![]() |
#55 | |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
Quote:
350 TTS, I am using an aquarium pump which just bubble through the water and agitates it.. seems to work quite well... the zinc plate does tend to oxidise quite quick if you don't passivate... even a quick dip seems to work quite well... i did get better results by heating the electrolyte up to 25 degrees... |
|
![]() |
![]() |
![]() |
#56 |
Lord of the Rings
Join Date: May 2013
Location: Norwich
Bike: M900sie
Posts: 5,840
|
I did a set of oil lines for dacs, with Nickel.
They came out pretty well, but I found the steel to be quite soft on the bent tubes and easy to dig in with the polishing mop. The brass ferrules polished and came up a treat. I tied them both into U shapes with wire and did both ends at the same time by dangling them in the electrolyte just up to the braid. One end went quite badly the first time. It stained black and all the plating peeled off like shelling a peanut, but I pepped up the acid pickle and it went well second time around. Time will tell how durable Nickel is in that exposed position.
__________________
|
![]() |
![]() |
![]() |
#57 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
Some bolts I just tighten… but critical components I always use a torque wrench… in the past I have used a long series a spanner and calculated the pull I need on a spring balance… but for some reason I could not get the spanner on I have used in the past and its part of an expensive set, so I didn’t want to modify it by grinding… , so had to make a tool… I knew that old spanner and socket would come in one day!
One tip I picked up years ago when I used to build Crossflow race engines was always mark the head nuts/bolts after the first stage torque. I would paint an arrow on them with tippex... then move on to the second stage torque, and then the final stage. then I would check all the arrows were facing the same direction, and if any weren't, I would give them an extra tweak until they did. the rational for this is that it takes much of the varying nut/bolt/washer friction out of the equation and you get an even clamping force. Of course that's exactly what you do in effect on modern engines, but now in a more refined way with an angle gauge... on a BMW engine I recently worked on the bolts were torqued to 40 NM, then 90 degrees, then another 90... I still put arrows on them! the reason for that is its all to easy to get confused as they need to be puled down in sequence, and there are 20 bolts! its all too easy to forget where you are... and its not like a torque wrench where you give it a click to check! All too easy to give a bolt 90, 90 and another 90, at which point it pings! ![]() |
![]() |
![]() |
![]() |
#58 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
When people ask me why Ducati bikes are expensive to maintain… I say try doing the valve clearances and adjusting them to the correct specification… its a fiddly job on the bench, let alone in the frame! and this is just the 2V!
![]() |
![]() |
![]() |
![]() |
#59 |
Too much time on my hands member
Join Date: Jan 2013
Location: Shipbourne
Bike: M900
Posts: 1,420
|
Dead satisfying when you get them right though
|
![]() |
![]() |
![]() |
#60 |
Registered User
Join Date: Jun 2018
Location: Wolverhampton
Bike: M900
Posts: 392
|
|
![]() |
![]() |
![]() |
|
|