M620 Tail Tidy

22-03-2017, 01:06 PM

Hi Guys,

I've got a M620 last year having swapped an old GSX600. Loving the Monster, but would like to change the look a little. I am trying to source a tail tiday, but can't find one anywhere other than US. Also the prices look rather high for what I am assessing as fairly simple metal work. Any ideas out there of where I could get one at a more reasonable price?

TIA,
Mickster

22-03-2017, 05:17 PM

Hello and welcome to the site!

I think I've got one of these that will supposedly fit an M620 according to the site. It's basically unused since I picked it up for my S2r only to realise it won't fit a bike with a chopped tail so I put it in storage.

PM me if you're interested.

Flip · 22-03-2017, 05:25 PM

There are a few options available depending upon if anything has been done to it already from simply loosing the original number plate holder to giving the bike a full tail chop if that takes your fancy.

My 900 is of the earlier type compared to yours and I didn't want to chop the frame (but I'm sure Dirty will be along soon to tell you to get the Hacksaw out

) so I simply removed the extended number plate holder etc. and made some new brackets for the indicators and a new plate holder tucking everything back and cleaning it all up.

22-03-2017, 05:42 PM

Nothing done to date. totally original. It's the "beer tray" i want to get rid of to give that shorter, stocky appearance.

Flip · 22-03-2017, 06:06 PM

Quote:

Originally Posted by Mickster

Nothing done to date. totally original. It's the "beer tray" i want to get rid of to give that shorter, stocky appearance.

Then you'll be getting the Hacksaw out and chopping the frame rails back- all pretty straight forward but you will need to re-route the seat release cable.

I know several years ago JMo made up some kits for this but I did find this which if memory serves is pretty similar so may do the trick for you:

http://www.ebay.co.uk/itm/ducati-mon...gAAOSwax5YyrOD

Or Ducati Performance made this when your bike was current that tidied it up without cutting the frame rails- still a bit of a tray but much smaller:

http://www.ebay.co.uk/itm/DUCATI-MON...sAAOSwnHZYYzhD

22-03-2017, 07:32 PM

Thanks. Very helpful. I think the Ducati one doesn't change things that much from how it looks. The other one looks more like what I want and not too crazy a price yet. Think I'll bid on that and if it goes silly make my own. Cheers Flip.

Dirty · 22-03-2017, 11:54 PM

Good man Mickster

Clearly you're not the sort of guy who would walk around with the tags still attached to your shirt

I ended up making my own tail tidy

http://www.ukmonster.co.uk/monster/s...1&postcount=39

http://www.ukmonster.co.uk/monster/s...8&postcount=41

26-03-2017, 09:04 AM

Quote:

Originally Posted by Mickster

Hi Guys,

I've got a M620 last year having swapped an old GSX600. Loving the Monster, but would like to change the look a little. I am trying to source a tail tiday, but can't find one anywhere other than US. Also the prices look rather high for what I am assessing as fairly simple metal work. Any ideas out there of where I could get one at a more reasonable price?

TIA,
Mickster

Hey buddy,

I did the job myself after purchasing the tail tidy from ducatimonstertailchop.com. In total it worked out about £80-ish I think, but it has everything you need and its specifically made for the Monster. E-mail Ty or go on the website. Very helpful and lots of testimonial. Definitely worth the money.

Just trying to work out how to upload a picture...

22-03-2017, 01:06 PM	#1
Mickster Guest Posts: n/a	M620 Tail Tidy Hi Guys, I've got a M620 last year having swapped an old GSX600. Loving the Monster, but would like to change the look a little. I am trying to source a tail tiday, but can't find one anywhere other than US. Also the prices look rather high for what I am assessing as fairly simple metal work. Any ideas out there of where I could get one at a more reasonable price? TIA, Mickster

22-03-2017, 05:25 PM	#3
Flip Registered User Join Date: Mar 2010 Location: Beachtown Bike: M900 Posts: 2,188	There are a few options available depending upon if anything has been done to it already from simply loosing the original number plate holder to giving the bike a full tail chop if that takes your fancy. My 900 is of the earlier type compared to yours and I didn't want to chop the frame (but I'm sure Dirty will be along soon to tell you to get the Hacksaw out ) so I simply removed the extended number plate holder etc. and made some new brackets for the indicators and a new plate holder tucking everything back and cleaning it all up. __________________ You're perfect, yes, it's true- But without me you're only you!

22-03-2017, 11:54 PM	#7
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	Good man Mickster Clearly you're not the sort of guy who would walk around with the tags still attached to your shirt I ended up making my own tail tidy http://www.ukmonster.co.uk/monster/s...1&postcount=39 http://www.ukmonster.co.uk/monster/s...8&postcount=41 __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

22-03-2017, 05:17 PM	#2
fim Guest Posts: n/a	Hello and welcome to the site! I think I've got one of these that will supposedly fit an M620 according to the site. It's basically unused since I picked it up for my S2r only to realise it won't fit a bike with a chopped tail so I put it in storage. PM me if you're interested.

22-03-2017, 05:42 PM	#4
Mickster Guest Posts: n/a	Nothing done to date. totally original. It's the "beer tray" i want to get rid of to give that shorter, stocky appearance.

22-03-2017, 07:32 PM	#6
Mickster Guest Posts: n/a	Thanks. Very helpful. I think the Ducati one doesn't change things that much from how it looks. The other one looks more like what I want and not too crazy a price yet. Think I'll bid on that and if it goes silly make my own. Cheers Flip.