1997 M600 gear change lever fouling side stand - Page 2

Albie · 30-11-2015, 08:51 PM

Quote:

Originally Posted by Mr Gazza

I hate to say it Albie, but you seem to have straightened out a correctly shaped lever.

The bend an inch from the toe peg is meant to be there...The lever is not straight.

It exits from the boss at an angle and so places the toe peg futher out from the bike than the pivot....

....Bugger it I'll get a picture..

And if you are only going to warm it with a hair dryer, you may as well not bother.

I'm not stoopid

Its not straight it has the kick in to the bike I checked it.

Mr Gazza · 30-11-2015, 09:02 PM

You must have melted it with your hair dryer....Or did it come from Wavey-line the Grocer.?...

Albie · 30-11-2015, 09:15 PM

Quote:

Originally Posted by Mr Gazza

You must have melted it with your hair dryer....Or did it come from Wavey-line the Grocer.?...

It was bent

as you can see by the graze.

I don't think I used a hair dryer actually. I use that for paint and heat shrink.

£20 for whole thing wasn't so bad and from a 695.

Mr Gazza · 30-11-2015, 09:20 PM

Only joshin' Albie....It looks lovely, and £675 is quite some saving too..

Peace and Love..

Albie · 30-11-2015, 09:29 PM

Quote:

Originally Posted by Mr Gazza

Only joshin' Albie....It looks lovely, and £675 is quite some saving too..

Peace and Love..

Me too

Darren69 · 01-12-2015, 11:21 AM

New lever on ebay:-

http://www.ebay.co.uk/itm/DUCATI-MON...UAAOSwnH1WXK0E

Dirty · 01-12-2015, 08:35 PM

Alloy stand and bent lever!

sram · 02-12-2015, 11:37 PM

Thanks! Will keep an eye on that auction. Might put a bid in if it doesn't go to silly money.

30-11-2015, 09:02 PM	#17
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,981	You must have melted it with your hair dryer....Or did it come from Wavey-line the Grocer.?... __________________

30-11-2015, 09:20 PM	#19
Mr Gazza Lord of the Rings Join Date: May 2013 Location: Norwich Bike: M900sie Posts: 5,981	Only joshin' Albie....It looks lovely, and £675 is quite some saving too.. Peace and Love.. __________________

01-12-2015, 11:21 AM	#21
Darren69 Transmaniacon MOC Join Date: Sep 2013 Location: Sutton In Ashfield Bike: Multiple Monsters Posts: 6,095	New lever on ebay:- http://www.ebay.co.uk/itm/DUCATI-MON...UAAOSwnH1WXK0E __________________ Roast Beef Monster! Termignoni and Bucci - Italian for pipe and slippers! S4 Fogarty, S4R 07T, 748, Series 1 Mirage

01-12-2015, 08:35 PM	#22
Dirty Bockloks Join Date: Jan 2012 Location: London Bike: No Bike Yet! Posts: 4,601	Alloy stand and bent lever! __________________ Wounds heal, chicks dig scars, glory lasts forever Beware of eBay

02-12-2015, 11:37 PM	#23
sram Registered User Join Date: Aug 2015 Location: London Bike: M600 Posts: 72	Thanks! Will keep an eye on that auction. Might put a bid in if it doesn't go to silly money.