Dyno set-up South-West

04-03-2012, 10:46 AM

Hi, got a S4R with termi's and race ecu fitted and it is awful for fuel consumption and virtually unrideable on a light throttle opening/low gear. To say the throttles need balancing is a huge understatement, but I'm thinking of getting it done properly on a dyno. Does anybody out there know of anywhere decent in the South-West? I'm in Newquay and don't mind travelling for a quality set-up! Custom EPROM mapping would be an advantage too!

Pedro · 04-03-2012, 10:54 AM

Louigi Moto in the bristol area has a dyno and gives top service

Rally · 04-03-2012, 10:55 AM

Also Moore speed racing in Bournemouth have one.

04-03-2012, 10:57 AM

Quote:

Originally Posted by andythehandyman

Hi, got a S4R with termi's and race ecu fitted and it is awful for fuel consumption and virtually unrideable on a light throttle opening/low gear. To say the throttles need balancing is a huge understatement, but I'm thinking of getting it done properly on a dyno. Does anybody out there know of anywhere decent in the South-West? I'm in Newquay and don't mind travelling for a quality set-up! Custom EPROM mapping would be an advantage too!

As pedro says, call Lougi Moto. They have the facility to custom map the stock ECU.

Paul_ · 04-03-2012, 05:01 PM

There is a place in North Devon where a mate of mine is having his bike set up after dynojetting/airbox/exhaust mods. Called Ace motorcycles in Bude, very good by all accounts and much closer than having to trudge to Bristol all the time.

Do Riders in Bridgewater do any Dyno stuff? It's still a trek but again closer with it being Bridgwater, although you will be paying more for their time being a main dealer. Had my bike serviced there recently and they did collect and return it free of charge.

04-03-2012, 06:47 PM

Scooter red did my dyno, based in Cheltenham, plus he races monsters so knows more than most, you should see his own bike, engine has full magnesium casings, and its worth going up just to see those.

Bill and Brian that run the place and are two of he best spanner men going. Highly recommended!

Z.

04-03-2012, 09:37 PM

Cheers guys, probably give Ace a ring, should be able to get to Bude on one tank of fuel, not the two it would take to get to Bristol!! Heard a good report about them and it's a cracking ride up the Atlantic Highway to get there!

04-03-2012, 10:46 AM	#1
andythehandyman Guest Posts: n/a	Dyno set-up South-West Hi, got a S4R with termi's and race ecu fitted and it is awful for fuel consumption and virtually unrideable on a light throttle opening/low gear. To say the throttles need balancing is a huge understatement, but I'm thinking of getting it done properly on a dyno. Does anybody out there know of anywhere decent in the South-West? I'm in Newquay and don't mind travelling for a quality set-up! Custom EPROM mapping would be an advantage too!

04-03-2012, 10:54 AM	#2
Pedro Ciao, come stai? Join Date: Apr 2003 Location: Somewhere Bike: Multiple Monsters Posts: 4,158	Louigi Moto in the bristol area has a dyno and gives top service __________________ Monster 1200R! KTM 990 SuperDuke

04-03-2012, 05:01 PM	#5
Paul_ Registered User Join Date: Jan 2011 Location: Plymouth Bike: M696 Posts: 124	There is a place in North Devon where a mate of mine is having his bike set up after dynojetting/airbox/exhaust mods. Called Ace motorcycles in Bude, very good by all accounts and much closer than having to trudge to Bristol all the time. Do Riders in Bridgewater do any Dyno stuff? It's still a trek but again closer with it being Bridgwater, although you will be paying more for their time being a main dealer. Had my bike serviced there recently and they did collect and return it free of charge. Last edited by Paul_; 04-03-2012 at 05:28 PM..

04-03-2012, 10:55 AM	#3
Rally Taking life easy........ Join Date: Feb 2010 Location: Wiltshire Bike: Other Not a Ducati Posts: 1,969	Also Moore speed racing in Bournemouth have one.

04-03-2012, 06:47 PM	#6
Zak Guest Posts: n/a	Scooter red did my dyno, based in Cheltenham, plus he races monsters so knows more than most, you should see his own bike, engine has full magnesium casings, and its worth going up just to see those. Bill and Brian that run the place and are two of he best spanner men going. Highly recommended! Z.

04-03-2012, 09:37 PM	#7
andythehandyman Guest Posts: n/a	Cheers guys, probably give Ace a ring, should be able to get to Bude on one tank of fuel, not the two it would take to get to Bristol!! Heard a good report about them and it's a cracking ride up the Atlantic Highway to get there!