spraying tips

14-07-2010, 10:27 PM

does anybody out there now about spraying and i dont mean fake tans! i am renovating an old bike (sssshhhhh its a triumph). but im not sure as to what type of primers i need for alloy and do you need to primer on top of powder coating. the duc will be next. thanks.

Nickj · 14-07-2010, 11:28 PM

On ally an etch primer so it sticks.
On powder a plastic primer.

14-07-2010, 11:30 PM

Good luck I am priming bits at the mo...

I have been over perfectionist with mine... got told off tonight!!!!...
Just take your time.. and best of luck.
Nowt wrong with trumpets!!

17-07-2010, 06:34 PM

cheers just got some bits powder coated by local company and they are s..t. the finish is rough and they are the wrong colour also not covered all over. plus the numpty powder coated the inside of the gearbox casings needless to say he only got paid for sandblasting the parts. so the dilema is i have powder coated parts flatted down with bits of ally showing through what primer do i use on that? i am as bad as you he11cat it has got to be right. cheers for all the advice.

17-07-2010, 08:47 PM

I heard if you can PI$$ you can paint.

17-07-2010, 11:54 PM

Quote:

Originally Posted by Panther

I heard if you can PI$$ you can paint.

W4nker! You have no Idea.

18-07-2010, 01:01 AM

Quote:

Originally Posted by dunlop0_1

W4nker! You have no Idea.

that does not help either

------------------------------------------

I would get the powder coaters to re do it. Get them to sandblast the lot. Then mask off your self the parts you don't want to get painted.

If the parts are still rough after sand blasting, your paint will still be rough, you might want them to do that again Or sand it down your self

When I had my rear sprocket cover powder coated, I hold them to re-do it because they scratched it afterwards.

18-07-2010, 01:16 AM

Painting is no easy thing to do well... I am NO expert at all.

I am just playing with bits , I am to finicky it would take me about 5 years to get a whole bike done!
I got told to leave my primer alone this week as I kept finding little bits I wasn't happy with.

I had to reject a whole paint job on my ex husbands bike as I have said before it was a dog..
It has to be right.. paint makes the bike or car!!

18-07-2010, 01:24 AM

~off topic~ what about a cromo monster???

18-07-2010, 01:32 AM

what you want to know ?????..

They are shiny... they are very nice in my eyes .. but you mangle your tank its not a fill and spray jobby!!!.. is new tank or get one chromed.. so yes... that you have to bare in mind ... sticking a chrome tank on any old monster doesn't make it a "Chromo" .. as they have a few little special items..
Often they are owned by special people...

They are also marmitey things .. lots of thats nice with as many oh gosh that orrible...

18-07-2010, 07:50 PM

well you heard wrong panther i used to spray furniture a long time ago and its not as easy as it looks !!!. the thing im not sure of is the primers for different materials.

14-07-2010, 10:27 PM	#1
revver Guest Posts: n/a	spraying tips does anybody out there now about spraying and i dont mean fake tans! i am renovating an old bike (sssshhhhh its a triumph). but im not sure as to what type of primers i need for alloy and do you need to primer on top of powder coating. the duc will be next. thanks.

14-07-2010, 11:28 PM	#2
Nickj Too much time on my hands member Join Date: Jun 2007 Location: Forest Of Dean Bike: S2r Posts: 3,208	On ally an etch primer so it sticks. On powder a plastic primer. __________________ "The final measure of any rider's skill is the inverse ratio of his preferred Traveling Speed to the number of bad scars on his body." Song of the sausage creature

18-07-2010, 01:32 AM	#10
He11cat Guest Posts: n/a	what you want to know ?????.. They are shiny... they are very nice in my eyes .. but you mangle your tank its not a fill and spray jobby!!!.. is new tank or get one chromed.. so yes... that you have to bare in mind ... sticking a chrome tank on any old monster doesn't make it a "Chromo" .. as they have a few little special items.. Often they are owned by special people... They are also marmitey things .. lots of thats nice with as many oh gosh that orrible... Last edited by He11cat; 18-07-2010 at 01:46 AM..

14-07-2010, 11:30 PM	#3
He11cat Guest Posts: n/a	Good luck I am priming bits at the mo... I have been over perfectionist with mine... got told off tonight!!!!... Just take your time.. and best of luck. Nowt wrong with trumpets!!

17-07-2010, 06:34 PM	#4
revver Guest Posts: n/a	cheers just got some bits powder coated by local company and they are s..t. the finish is rough and they are the wrong colour also not covered all over. plus the numpty powder coated the inside of the gearbox casings needless to say he only got paid for sandblasting the parts. so the dilema is i have powder coated parts flatted down with bits of ally showing through what primer do i use on that? i am as bad as you he11cat it has got to be right. cheers for all the advice.

17-07-2010, 08:47 PM	#5
Panther Guest Posts: n/a	I heard if you can PI$$ you can paint.

18-07-2010, 01:16 AM	#8
He11cat Guest Posts: n/a	Painting is no easy thing to do well... I am NO expert at all. I am just playing with bits , I am to finicky it would take me about 5 years to get a whole bike done! I got told to leave my primer alone this week as I kept finding little bits I wasn't happy with. I had to reject a whole paint job on my ex husbands bike as I have said before it was a dog.. It has to be right.. paint makes the bike or car!!

18-07-2010, 01:24 AM	#9
Panther Guest Posts: n/a	~off topic~ what about a cromo monster???

18-07-2010, 07:50 PM	#11
revver Guest Posts: n/a	well you heard wrong panther i used to spray furniture a long time ago and its not as easy as it looks !!!. the thing im not sure of is the primers for different materials.