Leo Vinci's fitted

chris.p · 23-09-2009, 10:36 PM

Well finaly managed to get the Leo Vinci cans fitted to Cathy's bike over the weekend, well happy with the results especialy as they are for an S2 but still fit (just) to a 620, also got the DP airbox lid and filter thrown in with them

Cathy took it down to Italia to have the air/fuel ratio re-set, she said it's like it's been put on steroids

Chris.

24-09-2009, 07:36 AM

Chris , any issues with the link pipes hitting the swing arm . Was pointed out to me and theyre bl**dy close. Gorgeous bike as well mate.

steeevvvooo · 24-09-2009, 09:46 AM

I’ve got one of those things, and it sounds great, so can only imagine what 2 sound like!!??

Taking the baffles out made a big difference (if you haven’t already done so)

Mine’s in Rosso Corse as we speak, waiting on a de-cat pip and fuelling set up. Can’t wait to have it back!

24-09-2009, 10:00 AM

Very nice! How comes your cans don't have the bracket which straps it to the frame near the tail?

Your bike is almost the same as mine except you have a belly pan and I have High level Termis instead of Leo's

EDIT: never mind I've just seen that it straps to the foot peg hanger instead as they are a little lower down

chris.p · 24-09-2009, 11:03 PM

Quote:

Originally Posted by big pete

Chris , any issues with the link pipes hitting the swing arm . Was pointed out to me and theyre bl**dy close. Gorgeous bike as well mate.

Right hand side is fine, but the left hand is damn close, but has not touched the s/arm as yet so ok, they are for an S2, so that is probablt the reason why. I may make some small adjustments at a later date if I am not happy with the gap.

Chris.

24-09-2009, 11:09 PM

Have a look at my other thread, mine are exactly the same and I think mine are meant for an S4/S2 as well

chris.p · 24-09-2009, 11:24 PM

Quote:

Originally Posted by rac3r

Have a look at my other thread, mine are exactly the same and I think mine are meant for an S4/S2 as well

Yep, saw that earlier, looks like you have enough of a gap if it is 3 to 4mm.

Chris.

steeevvvooo · 25-09-2009, 08:46 AM

My pipes are touching the swingarm (S2R) as well!

Well, not exactly the swingarm, but the end of the hugger that runs along the arm. I need to trim the carbon, then I'll probably have about 2mm gap!

chris.p · 25-09-2009, 03:54 PM

Quote:

Originally Posted by steeevvvooo

My pipes are touching the swingarm (S2R) as well!

Well, not exactly the swingarm, but the end of the hugger that runs along the arm. I need to trim the carbon, then I'll probably have about 2mm gap!

Might be an idea to slacken all the bolts/nuts on the system infront of the cans, ie, the header nuts and all the pipe joining bolts, jiggle it all around abit till you get the required clearences and retighten.

Chris.

singletrack · 25-09-2009, 04:19 PM

Quote:

Originally Posted by rac3r

Have a look at my other thread, mine are exactly the same and I think mine are meant for an S4/S2 as well

Yours are definitely for a 620 - the part number should be on the box with the original ones.

25-09-2009, 06:10 PM

I didn't check the model number, I just read what it said on the instructions

singletrack · 25-09-2009, 10:25 PM

Quote:

Originally Posted by rac3r

I didn't check the model number, I just read what it said on the instructions

I think you will find the instructions say they fit an S4 (not an S2R) which has the same frame and swingarm as the 620.

steeevvvooo · 26-09-2009, 12:13 AM

Quote:

Originally Posted by chris.p

Might be an idea to slacken all the bolts/nuts on the system infront of the cans, ie, the header nuts and all the pipe joining bolts, jiggle it all around abit till you get the required clearences and retigten

I might try this weekend. Although, if the garage couldn't sort it, it might one of those legendary ducati poor fit issues!

What's the worst that could happen? Am I being a bit niaive?

24-09-2009, 07:36 AM	#2
big pete Guest Posts: n/a	Chris , any issues with the link pipes hitting the swing arm . Was pointed out to me and theyre bl**dy close. Gorgeous bike as well mate.

24-09-2009, 09:46 AM	#3
steeevvvooo Registered User Join Date: Aug 2008 Location: Bromley Bike: M1100evo Posts: 1,512	I’ve got one of those things, and it sounds great, so can only imagine what 2 sound like!!?? Taking the baffles out made a big difference (if you haven’t already done so) Mine’s in Rosso Corse as we speak, waiting on a de-cat pip and fuelling set up. Can’t wait to have it back!

24-09-2009, 10:00 AM	#4
rac3r Guest Posts: n/a	Very nice! How comes your cans don't have the bracket which straps it to the frame near the tail? Your bike is almost the same as mine except you have a belly pan and I have High level Termis instead of Leo's EDIT: never mind I've just seen that it straps to the foot peg hanger instead as they are a little lower down

24-09-2009, 11:09 PM	#6
rac3r Guest Posts: n/a	Have a look at my other thread, mine are exactly the same and I think mine are meant for an S4/S2 as well

25-09-2009, 08:46 AM	#8
steeevvvooo Registered User Join Date: Aug 2008 Location: Bromley Bike: M1100evo Posts: 1,512	My pipes are touching the swingarm (S2R) as well! Well, not exactly the swingarm, but the end of the hugger that runs along the arm. I need to trim the carbon, then I'll probably have about 2mm gap!

25-09-2009, 06:10 PM	#11
rac3r Guest Posts: n/a	I didn't check the model number, I just read what it said on the instructions