![]() |
Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact | ![]() |
![]() |
|
![]() |
![]() |
Registered
Members: 634 | Total Threads: 50,817 | Total Posts: 518,467 Currently Active Users: 468 (0 active members) Please welcome our newest member, simifeltham |
![]() |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Guest
Posts: n/a
|
Broken fuel tank vent tubes
Looking around the bike earlier I noticed a rubber tube hanging between the swing arm and the back of the engine casing.
Following the tube up it appears to have been one of two broken tubes that follow up to the bottom the fuel tank. Haynes manual say’s these are fuel tank breathers. Could anyone confirm and also more importantly let me know if there’s any issue with them sitting where they currently are in the cutoff state, behind the clutch. I will of course contact Moto Rapido for replacements on Monday but if it’s not safe to ride over the weekend it would be good to know. Picture shows my finger across both tubes. ![]() |
![]() |
![]() |
#2 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,831
|
they are only vents and oveflows , dont need ducati hoses any decent same sized fuel resistant hose is ok even cut down they wont do much harm unless they are blocked or leaking onto hot parts
what year is your 750
__________________
MONSTERMAN |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
Thanks Jerry.
It’s 00 |
![]() |
![]() |
#4 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,831
|
same as mine , they are superb ,, im in brighton we should meet
__________________
MONSTERMAN |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Sep 2010
Location: Leics
Bike: M900
Posts: 2,848
|
Not sure exactly how they are on a carby tank but on mine I have the overflow and breather connected as they exit the tank into a 'Y' piece and then just a single hose down to the ground, tidies things up a bit IMO.
__________________
M900, 916, LeMans II. |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
Up for that Jerry. Let me know good times for you and we can figure something out?
In the Haynes manual it’s illustrated like that. I’ll be ordering some fuel safe rubber tubing and the ‘Y’ piece. |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|