Register | FAQ | Members List | Calendar | Today's Posts | Search | Contact |
|
Registered
Members: 667 | Total Threads: 50,918 | Total Posts: 519,238 Currently Active Users: 983 (0 active members) Please welcome our newest member, Joshyyy94 |
|
|
Thread Tools | Display Modes |
23-06-2024, 07:45 PM | #1 |
Old Git
Join Date: May 2006
Location: Cricklade
Bike: Multiple Monsters
Posts: 2,883
|
8mm broken studs wont comne out
Not Ducati but an engineering problem on my Fiat engine ,, replacing EGR its a well known issue that the 8mm bolts rust in place ,, 2 came out after lots of heat and pentrating oil and torgue hammer but 2 sheared with about 8mm clear ,, so More heat , more penetrating oils 3 days now ,, then Snapon gripping Stud extractor but still not budging they are totally rusted in over 200fy lb of torque used !!!!!
cant use 2 nut trick not enough thread above engine block and I cant weld to save my life ,, even if I had a welder. its clear to me that the penetrating oil is not penetrating at all any ideas guys drilling them out might be next option ????????? if I can get a drill in the space ???
__________________
MONSTERMAN |
|
|